RGBlink TAO 1tiny UVC-HDMI Capture Converter User Manual
- June 6, 2024
- RGBlink
Table of Contents
TAO 1tiny UVC-HDMI Capture Converter
User Manual
Overview
About TAO 1tiny
TAO 1tiny is the essential accessory for compact webcam and ePTZ camera users,
enabling those cameras to become HDMI native devices connectable almost
anywhere.
This tiny inline converter- measuring at just 9x5x3cm, provides HDMI
connectivity for cameras and similar USB-C UVC capture devices, supporting
popular VESA standard resolutions up to 4K Video transcoded to HDMI is
uncompressed with full fidelity maintained for superior visual performance.
Parts Info
01 Type C Power Port
02 USB 2.0 COM Port
03 USB Type C Input Port
04 HDMI 2.0 Output Port
Note: If the input UVC signal is 4K@30 and the HDMI OUT connecting to 4K monitor,the output resolution up to 4K@60.
Connecting TAO 1tiny
Installing TAO 1tiny
TAO 1tiny supports USB 3.0 (UVC compliance) to HDMI 2.0 output. It can work
with a USB camera and mini-series.
How to Work With USB Camera
Please operate as shown in the following figure:
- Connecting Power Port with power supply.
- Connecting USB-C Input Port with USB Camera via USB-C cable.(TAO 1tiny can supply power to USB camera:5V/1A)
- Connecting HDMI 2.0 Output Port with monitor via HDMI cable.
If necessary, you can plug in USB Receiver into the USB 2.0 Port to control the USB camera via remote control.
How to Work With mini Series
Please operate as shown in the following figure:
- Connecting Power Port of TAO 1tiny with power supply.
- Connect mini-pro with USB-C Input Port via USB 3.0 to USB-C cable.
- Connecting HDMI 2.0 Output Port with monitor via HDMI cable.
Firmware Upgrade
TAO 1tiny can be upgraded via a USB disk. The device will auto-upgrade after
plugging the USB disk(including the latest upgrade firmware) into the USB 2.0
port. The device will auto-restart after upgrade and you can find a file of
the upgrade done in the USB disk. Besides, the HDMI monitor will show the
message of “Upgrade Done” and the upgrade version.
⚠ Do not disconnect the device during firmware upgrade.
Content is subject to change without notice. Users can download the latest Manual Book on www.rgblink.com
Warranty
All products are designed and tested to the highest quality standard and
backed by 1-year parts and labor warranty. Warranties are effective upon
delivery date to customer and are non-transferable. RGB link warranties are
only valid to the original purchase/owner. Warranty-related repairs include
parts and labor, but do not include faults resulting from user negligence,
special modification, lighting strikes, abuse(drop/crush), and/or other
unusual damages. Warranty is returned to base. Return for repairs is accepted
only where shipping charges are prepaid.
Your complete satisfaction is our goal.
According to the after-sale service, please contact our team as soon as
possible after the failure occurs to obtain the corresponding after-sale
service.
Headquarter: S601 Weiye Building Torch Hi-Tech Industrial Development Zone
Xiamen, Fujian Province, P.R.C
- Tel: +86-592-5771197
- Fax: +86-592-5788216
- Customer Hotline: 4008-592-315
- Web:http://www.rgblink.com
- E-mail: support@rgblink.com
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 0592 5771197 | support@rgblink.com |
www.rgblink.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>