RGBlink mini-pro Dual Channel 4K Video Switcher User Guide
- June 4, 2024
- RGBlink
Table of Contents
mini-pro
Quick Start
Install Your Product
|
---|---
Connect the mini-pro to the power plug by the link cable.| Connect PC,laptop,
camera or DVD to mini-pro’s HDMI IN port via HDMI cable.
|
Connect mini-pro HDMI OUT port to monitor to HDMI preview the input and
output.| Connect the microphone to the mini pro’s Audio IN port and connect
the speaker or earphone to Audio OUT port.
|
Connect the laptop to mini-pro’s USB 3.0 port via USB cable, and mini-pro will
be captured as a webcam source.| Connect mini pro’s LAN port to laptop via
CAT6 cable, and control mini-pro on software.
|
Connect mini pro’s USB 3.0 port to your laptop to stream and record.| Turn on
the Power button on the rear panel,the device will enter to the boot interface
within 10S.
Touch Screen
Push the corresponding menu icon and the 2-inch LCD screen will enter the corresponding interface.
Switch Source
mini-pro is default 0.5S Fast Fade mode, by pushing ①②③④signal buttons, 4 input signals can be switched in fast fade mode.
Switch Effect Setting
Touch【EFFECT】icon to enter the menu.
Switch Mode Setting
Touch【MODE】icon to enter the menu. The touch screen also has some simple swipe
shortcut functions.
When four signal sources plug in, the lights on the signal source buttons will
appear in four states:
Steady green: The signal is recognized and no operation is performed;
Flashing green: The currently selected signal is ready to be switched;
Steady red: The current signal is in PGM output; Unlit: No signal source is
connected or the resolution of the signal source connected is not accepted.
Select the effect, the root directory icon will be replaced with the last
selected icon. You can select Fast or T-BAR and set the duration time
Video Output
Push button【M】to return to main menu and find 【VIDEO OUT】to set parameters for the HDMI and USB output. HDMI/USB output can be switched to PVW, PGM, TP or the 4 input content in field application.
Audio Setting Tap【Audio】to enter the sound setting interface. Turn on【MIX】to always add audio to PGM, Turn on【AFV】, the audio follows the video switch to perform a soft gradual transition when video is switched. HDMI output defaults multi-screen preview, USB output defaults PGM. Touch【M】again to preview 4 inputs.
Input Line or Mic level audio selectable to output. The volume can be adjusted by sliding the bar,and you can touch【HDMI】【MIC】【LINE】to make detail setting If the sound and the video are not synchronous, increase or reduce the Delay value under AFV.(External and HDMI input audio support delay up to 160ms)
Click 【MIC】in 【AUDIO】interface to do the following setting.
MIC: ON/OFF
Volume: 0-100
Delay: 0-160ms When the touch screen is in the main interface/ preview
interface/Shortcut interface, the PGM audio volume can be adjusted by the
toggle. Touch 【 M 】 button to return the main menu, and select【PIP】icon.
Click【LINE】in【AUDIO】page to do the following setting.
LINE: ON/OFF
Volume: 0-100
Delay: 0-160ms
Turn on PIP
PIP offers 8 layout options, select the one you need.
Chroma Key
Tap【Chroma Key】to enter the setting menu.
You can set the size of layers via sliding the bar. Adjust the size of the screen through the toggle, and all the re-adjusted settings will be saved to the current View in real-time. You can adjust Size and Position for the main/sub picture You can choose on or off to enable/disable the function and select the background color to be removed and make adjustments. You can use the joystick to switch the selection of the main/sub-screen and adjust the size, push the signal source to switch between different signals.
PTZ
Tap【PTZ】icon to enter the menu.
You can adjust the location, zoom and focus in the menu.
Load and Save
After setting the effect, please touch the button 【M】and select the【Save】. Push button【S】to enter the Shortcut menu
You can choose on or off to enable/disable the function, select the number of cameras,and set the IP address. On the PTZ menu interface, when the PTZ function is enabled, the rotation angle of the PTZ can be adjusted by the joystick, and the focal length adjusted by the toggle. You can save the preset to the corresponding View 1-8.(Yellow icon indicates the view that being used,green one is saved views.) Select View1~4 to load the saved presets directly
Record
The mini-pro supports recording streaming media content to an external SSD or U disk through the USB2.0 interface. The SSD storage can reach up to 2T, and the U-disk can support up to 64G. The supported formats include exFAT.
Format the SSD or U-disk and then insert it into the USB2.0 interface RECORD.
Press the button to start/stop record.
Touch【Disk Info】to view the Capacity and Remaining time.
Press【Record】to enter the menu.
Turn ON/OFF to record audio and set the quality.
Contact Information
Visit our website which has a host of resources and check out our YouTube channel for How To videos and much more. Or reach out to the team any time via the website or our socials. Proudly designed and manufactured in Xiamen China, our beautiful island city home & HQ. Xiamen RGBlink Science & Technology Co Ltd Room 601A, No. 37-3 Banshang community, Building 3, Xinke Plaza, Torch Hi- Tech Industrial Development Zone, Xiamen, China
Web: http://www.rgblink.com
Tel: +86-592-5771197
Fax: +86-592-5788216
Customer Hotline: 4008-592-315
E-mail: [email protected]