RGBlink TAO 1Tiny Compact Streaming Switcher User Manual
- June 6, 2024
- RGBlink
Table of Contents
RGBlink TAO 1Tiny Compact Streaming Switcher
Overview
TAO 1tiny is the essential accessory for compact webcam and ePTZ camera users,
enabling those cameras to become HDMI native devices connectable almost
anywhere.
This tiny inline convertor- measuring at just 9x5x3cm, provides HDMI
connectivity for cameras and similar USB-C UVC capture devices, supporting
popular VESA standard resolutions up to 4K Video transcoded to HDMI is
uncompressed with full fidelity maintained for superior visual performance.
Parts Info
- Type C Power Port
- USB 2.0 COM Port
- USB Type C Input Port
- HDMI 2.0 Output Port
Note:
- If the input UVC signal is 4K@30 and the HDMI OUT connecting to 4K monitor,the output resolution up to 4K@60.
- Power of Adapter is not less than:5V/2A/10W;Do not use the USB port of the computer for power supply.
Installing TAO 1tiny
TAO 1tiny supports USB 3.0 (UVC compliance) to HDMI 2.0 output.It can work with USB camera and mini series.
How to Work With USB Camera
Please operate as shown in the following figure:
- Connecting Power Port with power supply.
- Connecting USB-C Input Port with USB Camera via USB-C cable.(TAO 1tiny can supply power to USB camera:5V/1A)
- Connecting HDMI 2.0 Output Port with monitor via HDMI cable.
Note: If necessary,you can plug in USB Receiver into USB 2.0 Port to control USB camera via remote control.
How to Work With mini Series
Please operate as shown in the following figure:
- Connecting Power Port of TAO 1tiny with power supply.
- Connecting mini-pro with USB-C Input Port via USB 3.0 to USB-C cable.
- Connecting HDMI 2.0 Output Port with monitor via HDMI cable.
Firmware Upgrade
TAO 1tiny can be upgraded via USB disk.The device will auto-upgrade after
plugging USB disk(including the latest upgrade firmware) to USB 2.0 port.The
device will auto-restart after upgrade and you can find a file of upgrade done
in the USB disk.Besides,the HDMI monitor will show the message of “Upgrade
Done” and upgrade version.
Do not disconnect the device during firmware upgrade.Content is subject to
change without notice. Users can download latest Manual Book on
www.rgblink.com
Warranty
All products are designed and tested to the highest quality standard and
backed by 1 years parts and labor warranty. Warranties are effective upon
delivery date to customer and are non-transferable. RGBlink
warranties are only valid to the original purchase/owner. Warranty related
repairs include parts and labor, but do not include faults resulting from user
negligence, special modification, lighting strikes, abuse(drop/crush),
and/or other unusual damages.Warranty is return to base.Return for repairs are
accepted only where shipping charges are prepaid. Your complete satisfaction
is our goal. According to the after-sale service,please contact our team as
soon as possible after the failure occurs to obtain the corresponding after-
sale service.
Headquarter: S601 Weiye Building Torch Hi-Tech Industrial Development Zone
Xiamen, Fujian Province, P.R.C
- Tel: +86-592-5771197
- Fax: +86-592-5788216
- Customer Hotline: 4008-592-315
- Web: http://www.rgblink.com
- E-mail: support@rgblink.com