RGBlink TAO 1Pro 5.5 Inch Touchscreen Full HD 4 Channel Switcher or Recorder User Guide
- October 30, 2023
- RGBlink
Table of Contents
RGBlink TAO 1Pro 5.5 Inch Touchscreen Full HD 4 Channel Switcher or
Recorder User Guide
Overview
TAO 1pro is a Broadcasting streaming decoder with a 5.5 inch FHD preview
display, but also a 4 channels seamless videoswitcher for 2 USB 3.0 and 2 HDMI
1.3 inputs, and supports streaming directly by Ethernet output which is ready
to connect toexternal cloud based router and streaming from Anywhere to
Everywhere.
TAO 1pro is compatible with standard USB 2.0 and USB 3.0 cameras by UVC
protocol, and brings itself as a much affordableand user friendly streaming
tools for anybody, the talents who is willing to be Anchor Online. TAO 1pro is
also with touch panel for finger configuration, and with optional 2 chargeable
battery extending its capacityforoutdoor application.
TAO 1pro can be divided into four parts: Input/Output Area, Scroll Area,
Reminder Area and Status Display Area.
Hardware Orientation
Front Panel
No. | Item | Description |
---|---|---|
1 | Power Button | Gently press to turn on,long press 3 seconds to turn |
off
2| Touch Screen| 5.5 inch touch screen for menu control
Interface Panel
No. | Connectors | Number | Description |
---|---|---|---|
1 | HDMI IN | 2×HDMI IN | Connect to camera and computer |
2 | HDMI OUT | 1×HDMI OUT | Connect to external monitor |
3 | Type C | 1×PD Type C | Connect to the power supply |
4 | Audio | 1×MIC IN/LINE OUT | Connect to microphone and earphone |
5 | LAN | 1×RJ45 | Gigabit network port |
6 | USB 2.0 | 1×USB Type A | Connect to harddisk for recording,and |
storage up to2T
7| USB 3.0| 2×USB Type A| Connect to USB camera for UVC capture
Product Installation
-
Power on TAO 1pro via USB-C power cord.
-
Connect the input source toTAO1pro HDMI IN connector.
-
Connect monitor to HDMI OUT interface to preview the input and output.
-
Connect microphone toAudioINinterface, speaker or earphones toAudioOUT interface.
-
Connect TAO 1pro to the router via CAT6 and stream to the live platform.
-
After connection,press the powerswitchon the top panel to open the device.
Use Your Product
Signal Switch
- Gently touch【HDMI 1】in the bottom menu bar.
- Select the signal you want to choose/switch.
- Source Status: –No Source; –Ready; –Selected.
- Only by switching to the UVC signal can the control be achieved. Grey status of UVC signal indicates unavailablestatus.
Streaming
Following steps take YouTube stream as example:
-
Make sure TAO 1pro connect to the network.
-
Open YouTube Studio on your computer,select【Go Live】–【Stream】,Copy Stream URL and StreamKey.
-
Create a new TXT file first,and paste the Streaming URL and Stream Key (the format must be : rtmp//:YOURSTREAM URL/YOUR STREAM KEY), and save the TXT file to USB as rtmp.ini.(Newline is required to addmultiplestreaming addresses) and connect the USB disk to TAO 1pro’s RECORD USB port.
-
Click [Stream Output] icon to enter the following interface.
-
Click [Confirm] to enter the [Stream Output Config] interface.
-
Click [ON AIR] to stream ( support up to 4 live streaming platforms at the same time).
Source Status: –Available but Failed in Streaming; –Streaming.
Player
- Insert a USB flash drive into the USB 2.0 port and then play the video in the USB.
- Press the icon to enter the [Player] interface and select the video you want to play.
Note: If there is no USB flash drive inserted, the icon displays gray status
NDI Decoder
- Set the IP address (same as the network of camera ), subnet mask and gateway in [Network Settings] of [Scroll Area].
- Press the icon to turn on the switch to start NDI decoding function.
NDI Encoder
Press the NDI decoding icon to enter the interface to set relative parameters.
Recorder
- Plug USB hard drive to TAO 1pro USB 2.0 port.
- Click record icon to start recording.
Note: If there is no USB flash drive inserted, the recording icon displays gray status.
Settings
Click [Setting] in Scroll Area to enter following interface to set Input
Settings, Network, Bluetooth, UVCControl, Fan Control, Stream Output, NDI
Decoder, NDI Encoder, Display and About
- Input Settings: Input Signal, Input Format, Audio Sampling Rate, Signal Name, Brightness, Contrast, Saturation, Hue and Sharpness.
- Network: Set IP Address, Netmask and Gateway.
- Bluetooth: ON/OFF. Turn ON Bluetooth and choose the device to be connected to achieve control of PTZcamera.
- UVC Control: Adjust parameters of PTZ cameras connected to TAO 1pro.
- Fan Control: Set fan speed and fan mode.
- Stream Output: Set display mode, resolution ,frame rate, bitrate.
- NDI Decoder/Encoder: Same settings as previous parts shown.
- Display:Set the brightness of the output, HDMI output resolution and display rotation.
- About: Include device info, language setting, update setting and factory reset.
Brightness/RGB Waveform/Vector/Histogram
Click Brightness/RGB Waveform/Vector/Histogram to select position and
transparency.
Audio Meter
Click Audio Meter to adjust settings of input and output audio.
Viewfinder
Click [Viewfinder] to select frame size(16:9 or 4:3). Users can cut out the screen outside the frame basedontheactual size.
Specification
Connectors| Input| HDMI 1.3
USB 3.0
2×HDMI-A
2×USB-A
---|---|---
Output| HDMI 2.0
1×HDMI-A
Record| USB 2.0
1×USB-A
Audio| In
Out
1×3.5mm Audio Jack
1×3.5mm Audio Jack
Communication/Stream| LAN
1×RJ45
Power| 1×USB-C
Performance| InputResolutions| HDMISMPTE720p@50/60 |
1080p@23/24/60VESA1024×768@60 | 1280×720@60 | 1280×800@60 | 1280×1024@60
|1360×768@60 | 1600×1200@60 | 1680×1050@60 |1920×1080@60
OutputResolutions| HDMISMPTE720p@50/60 | 1080p@24/25/50/60 |
2160p@60VESA1024×768@60 | 1280×720@50/60 | 1280×800@60 | 1280×1024@60
|1360×768@60 | 1920×1080@50/60 | 3840×2160@60
SupportedStandard| HDMI
1.3(Input) | 2.0(Output)USB3.0
Screen Feature| ScreenDimension| 5.5 ’’TFT
Resolution| 1080×1920 pixels
Dot Pitch| 0.063(H)×0.021(W)(mm)
Aspect Ratio| 16:9
Brightness| 450cd/m²
Contrast| 1000:1
Backlight| LED
View Angle| 80°/80°(L/R)80°/80°(U/D)
Power| Input Voltage| 9V/2A
Max Power| 18W
Environment| Temperature| 0℃~55℃
Humidity| 5%~85%
Physical| Weight| Net 350g(without battery);882g(with battery)Package
770g
Dimension| Net 161mm×106mm×36mmPackage 255mm×145mm×85mm
Contact Information
Warranty:
All video products are designed and tested to the highest quality standard and
backed by full 1 year parts andlabor warranty. Warranties are effective upon
delivery date to customer and are non-transferable. RGBlinkwarranties are only
valid to the original purchase/owner. Warranty related repairs include parts
and labor, but do not include faults resulting from user negligence, special
modification, lighting strikes, abuse(drop/crush), and/or other unusual
damages.
The customer shall pay shipping charges when unit is returned for repair.
Headquarter: Room 601A, No. 37-3 Banshang community, Building 3, Xinke Plaza, Torch Hi-TechIndustrial Development Zone, Xiamen, China
- Tel: +86-592-5771197
- Fax: +86-592-5788216
- Customer Hotline: 4008-592-315
- Web:
- E-mail: support@rgblink.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>