RGBlink RGB-RG004 Mini-Pro 4 HDMI Input Mixer and USB 3.0 Streaming User Guide
- June 6, 2024
- RGBlink
Table of Contents
RGBlink RGB-RG004 Mini-Pro 4 HDMI Input Mixer and USB 3.0 Streaming
Install Your Product
Connect mini-pro to power plug by the link cable.
Connect PC,laptop,camera or DVD to mini-pro’s HDMI IN port via HDMI cable.
Connect mini-pro HDMI OUT port to monitor to HDMI preview the input and
output.
Connect the microphone to mini-pro’s Audio IN port and connect the speaker or
earphone to Audio OUT port.
Connect the laptop to mini-pro’s USB 3.0 port via USB cable, and mini-pro will
be captured as a webcam source.
Connect mini-pro’s LAN port to laptop via CAT6 cable, and control mini-pro on
software.
Connect mini-pro’s USB 3.0 port to your laptop to stream and record.
Turn on the Power button on the rear panel,the device will enter to the boot
interface within 10S.
Touch Screen
Push corresponding menu icon and the 2-inch LCD screen will enter
corresponding interface.
Touch screen also has some simple swipe shortcut functions.
Switch Source
mini-pro is default 0.5S Fast Fade mode, by pushing signal buttons, 4 input
signals can be switched in fast fade mode.
Switch Effect Setting
When four signal sources plug in, the lights on the signal source buttons will
appear in four states:
Steady green: The signal is recognized and no operation is performed;
Flashing green: The currently selected signal is ready to be switched;
Steady red: The current signal is in PGM output; Unlit: No signal source
is connected or the resolution of the signal source connected is not accepted.
Switch Effect Setting
Touch【EFFECT】icon to enter the menu.
Select the effect, the root directory icon will be replaced with the last
selected icon.
Switch Mode Setting
Touch【MODE】icon to enter
You can select Fast or T-BAR and set the duration time
Video Output
Push button【M】to return to main menu and find 【VIDEO OUT】to set parameters for
the HDMI and USB output.
DMI output defaults multi-screen preview, USB output defaults PGM.
HDMI/USB output can be switched to PVW, PGM, TP or the 4 input content in
field application.
Touch【M】again to preview 4 inputs
Audio Setting
Tap【Audio】to enter the sound setting interface.
The volume can be adjusted by sliding the bar,and you can touch【HDMI1】 to make
detail setting.
Turn on【MIX】to always add audio to PGM, Turn on【AFV】, the audio follows the
video switch to perform a soft gradual transition when video is switched.
If the sound and the video are not synchronous, increase or reduce the Delay
value under AFV.(External and HDMI input audio support delay up to 160ms)
When the touch screen is in the main interface/ preview interface/Shortcut
interface, the PGM audio volume can be adjusted by the toggle.
Press button【S】to enter Shortcut interface, adjust the volume by sliding the
bar.
PIP
Touch 【 M 】 button to return the main menu,select【PIP】icon.
Turn on PIP
PIP offers 8 layout options,select one you need.
You can adjust Size and Position for main/sub picture
Chroma Key
Tap【Chroma Key】to enter the setting menu.
You can choose on or off to enable/disable the function and select the
background color to be removed and make adjustments.
You can set the size of layers via sliding the bar.
You can use the joystick to switch the selection of the main/sub-screen and
adjust the size, push the signal source to switch between different signals.
Adjust the size of the screen through the toggle, and all the re-adjusted
settings will be saved to the current View in real time
PTZ
Tap【PTZ】icon to enter the menu.
You can choose on or off to enable/disable the function,select the number of
camera,and set the IP address.
You can adjust the location and zoom in the menu.
On the PTZ menu interface, when the PTZ function is enabled, the rotation
angle of the PTZ can be adjusted by the joystick, and the focal length
adjusted by the toggle.
Load and Save
After setting the effect, please touch the button 【M】and select the【Save】.
You can save the preset to the corresponding View 1-8.(Yellow icon indicates
the view that being used,green one is saved views.)
Push button【S】to enter the Shortcut menu
Select View1~4 to load the saved presets directly
Record
The mini-pro supports recording streaming media content to an external SSD or U disk through the USB2.0 interface. The SSD storage can reach up to 2T, and the U-disk can support up to 64G. The supported formats include exFAT
Format the SSD or U-disk and then insert it into the USB2.0 interface RECORD.
Press【Record】to enter the menu.
Press the button to start/stop record.
Turn ON/OFF to record audio and set the quality.
Touch【Disk Info】to view the Capacity and Remaining time.
Contact Information
isit our website which has a host of resources and check out our YouTube channel for How To videos and much more. Or reach out to the team any time via the website or our socials. Proudly designed and manufactured in Xiamen China, our beautiful island city home & HQ. Xiamen RGBlink Science & Technology Co Ltd 6 th Floor, Weiye Building, Torch Park Hi Tech Zone,Xiamen, Fujian 361006
- Web:http://www.rgblink.com
- Tel: +86-592-5771197
- Fax: +86-592-5788216
- Customer Hotline: 4008-592-315
- E-mail:support@rgblink.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>