SDC MC-7 High Security Magnetic Switch Instruction Manual
- June 6, 2024
- SDC
Table of Contents
SDC MC-7 High Security Magnetic Switch Instruction Manual
SECURITY DOOR CONTROLS ■ WWW.SDCSECURITY.COM
[t] 800.413.8783 ■ 805.494.0622 ■ E-mail: service@sdcsecurity.com
801 Avenida Acaso, Camarillo, CA 93012 ■ PO Box 3670, Camarillo, CA 93011
Applications
Remote Latch Status Monitoring:
Retracting the latch by depressing the push pad provides an output signal
for local or remote visual and audible annunciation indicating forced entry or
unauthorized egress.
Mantrap Logic:
Provides N/O and N/C contacts required for 2 or more communicating doors
for Interlock and Mantrap applications.
Access Control REX:
When connected to the RequestTo-Exit input of a keypad, card or biometric
Access Controller, depressing the pushpad and retracting the latch actuates
the Latch Status contact, shunting the control access control alarm to permit
authorized egress and/or releases the magnetic door lock for uninhibited
egress.
Magnetic Lock Release:
Where Access Controller with REX input is unavailable, the N/C contact of
the switch is wired in series between the power supply and fail safe magnetic
lock. Depressing the exit device pushpad retracts the latch, causing the
contad to open, thereby releasing the magnetic lock for uninhibited egress.
Any suggestions or comments to this instruction or product are welcome. Please contact us through our website or email engineer@sdcsecurity.com