1Mii B06APTX-LL Wireless Audio Receiver User Manual

1Mii B06APTX-LL Wireless Audio Receiver

In the Box

• A. Bluetooth adapter
• B. 5V power cable
• C. 3.5mm to RCA cable
• D. User manual

Product Description

1. Power ON/OFF
2. Sound effects select
3. Charging port(DC-5V)
4. RCA out L
5. RCA out R
6. 3. Smm audio output

Installation diagram

Long press @ button power on.

•  Long press the button to enter 1 pairing mode. the blue and red LED
• Active Bluetooth on your phone to Click “B06APTX-LL” to pair.

Sound effects select Press the,’.30, button to achieve Bass sound effects, the LED light Will Change to green

Application scenario

It can turn all wired speakers into Bluetooth ones. Enjoy wireless music, free of harassment from any wires or cords.

Instructions for operation

1. 1. Connect your speaker to the adapter audio out port with the audio cable provided (3.5mm/RCA cable).
2. Press the ® button to power on.
3. Pairing – Pair the adapter with your Bluetooth-enabled phone/PC/tablet.
   • Set the adapter into the pairing mode, the LED flashes blue / Red alternately fast. – First-time use: The adapter will auto-enter the pairing mode (with clear memory).
   • Afterward: Long press the button to enter the pairing mode. (The LED flashes blue / Red alternately fast)
   • Activate Bluetooth on your phone or another device and click “B06APTX-LL” to connect. CD
   • Wait for the connection (For quick pairing, better keep both devices within 1 meter when pairing).
4. Enjoy your music.

Long press the button to enter the pairing mode. The blue and red LED will flash. Activate Bluetooth on your phone and click “B06APTX-LL” to pair. CD

Pair and connect two devices simultaneously:

1.  Pair with the first device by following the previous instructions in the “Installation diagram” section.
2.  Pair with the second device.
   • Long press the button to enter the pairing mode again. the LED will flash Blue and Red.
   • Activate Bluetooth on the second device and click “B06APTX-LL” to pair.

Note: You can only play music on one device at a time, therefore, if you want to play music on the second device, you need to pause the music on your first device before you play it.

Charging method

Plugin the charging cable to charge the receiver, the LED runs in steady red. When the battery is fully charged, the indicator will off.

Reset device

If the receiver cannot be connected or work properly, please refer to the following method to reset the device: press and hold the ©and 3D button together for 10 seconds, the lights flash purple alternately 3 times, Then restart the device, clear the device’s connection record, reset successfully.

Tip

The Bluetooth with the name B06APTX-LL is the low-latency version. The Bluetooth with the name B06APTX-HD is the high-definition version.

Product Parameters:

•  Model Number: B06APTX-LL CD
•  Product Name: Bluetooth Receiver
•  Bluetooth Version: 5.0
•  Operational range: indoors: up to 50-7011 (without obstacles)
•  Input voltage/ current: DC5V= 500mA
•  Charging lime: About 2.5 hour
•  Working duration: About 12 hours
•  Operating temperature: -10°C – 45°C
•  Storage temperature: -20°C – 60°C Product size: 60x54x23mm
•  Product weight: 35g

Warranty

Warranty service is limited to normal use. Any man-made damages such as from connecting to an unsuitable power source, using an unsuitable device, or not following the instructions, as well as damages that did not occur during shipping, repairs, and adjustments not approved by the company, damages from misuse, inattention, or improper installation may cause the warranty to be ineffective immediately. This warranty does not include shipping fees.

FCC Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Any questions? Contact:

support@1mii.com (Response Time:4-24h,excl. holidays)

MANUFACTURER

Address: 4th Fl, Bldg B, Runfeng Industrial Park, No. 4197 Baoan Blvd., Gushu Community, Xixiang St., Baoan Dist., Shenzhen, China.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>