MateStar PLM-315 Food Processor Instruction Manual

MateStar PLM-315 Food Processor

Food Processor Instruction

TECHNICAL DATA

Model: PLM-315

Rated voltage:   220-240V, 50/60Hz Power consumption:   1000W

SAFETY INSTRUCTIONS

Read the operating instructions carefully before putting the appliance into operation and keep the instructions for future reference.

• This appliance is for household use only.
•  Never dip the machine into any liquid and sharp edges. Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it immediately.
• Avoid children or other people who do not know the operation of this machine use it, unless they are under proper instruction. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction con_cerning the use of the appliance by a person responsible for their safety.
• Always disconnect the machine from the supply if it is left unattended and before assembling, disassembling, or cleaning.
• If the supply cord is damaged, it must be replaced by the manufacturer of its service agent or a similarly qualified person in order to avoid a hazard.
• Keep your finger away from moving parts and fitting tools. Never put your fingers etc in the hinge mechanism.
• Use only original spare parts.
• In order to ensure your children’s safety, please keep all packaging (plastic bags, boxes, polystyrene, etc.) out of their reach.
• Do not interfere with any safety switches.
• Place the machine on a smooth, flat, and stable working surface.
•  Be very careful when you handle the blades or inserts. Be especially careful when yoµ remove them from the machine, their cutting edges are very sharp.
• Wait until moving parts stop running before you remove the lid of the machine.
•  Do not exceed the maximum content indicated on the accessories.

BEFORE CONNECTING TO POWER

• Before connecting to the power, recheck the type of supply and the mains voltage match with the details given on the rating label on the appliance.
• Using for the first time, rip off all wrapping paper and plastic bags. Clean the fittings.

SAVE THESE INSTRUCTIONS

BEFORE CONNECTING TO POWER

• Before connecting to the power, please check whether the type of supply and the mains voltage match with the details given on the rating label on the appliance.
• Using for the first time, rip off all wrapping paper and plastic bags. Clean the fittings.

SPEED – Stepless SP.eed Regulating & Pulse Speed

After settle down the parts you need, turn on the stepless speed regulating to start the operation.

If you want the food processor move slowly, turn the adjustment for a little.

If you need the food processor move fast, turn the adjustment for more.

There is another adjustment: pulse switch.
Turn the pulse switch, the machine will move into the fastest speed. Stop the pulse switch, the machine will stop moving.

USING THE KNIFE BLADE

The 2 knife blades could be the most versatile of all the attachments

For Stainless Steel Knife Blade:

• Before Processing cut the food into pusher size pieces.
• not allow to work more than 3 min per time, cool the motor to cool before the next operation with 30 min at least.
• For coarser foods use the pulse control.

For Plastic Knife Blade:

• Not allow working more than 2 min. per time, cool the motor tool before the next operation with 30 min. at least.

follow the below flow pictured step by step to assemble the machine.

•  Ensure the bowl in step 2 and the lid in step 5 are locked well, or the machine will not work.
•  In step 3, the Stainless Steel knife blade or Plastic blade could be settled, sure either blade is fixed well on the shaft.
• After the operation, you can disassemble the machine by opposite flow and direction.
• Only open the lid when blades completely stopped

USING SLICER/ JULIENNE/ FRENCH FRIED POTATO/SHRED BLADE

• Please pay attention to the capacity line of the container. Once the food approaches the max line on the container, please stop operation and pour out food.
• A Switch on and push down evenly with the Pushers – never put your fingers in the feed tube.
• A Do not work more than 3 min per time., Allow the motor to cool before the next operation at least 30 min.
  • Julienne Blade
  • Slicer Blade
  • French Fried Potato Blade

Follow the flow pictured step by step to assemble the machine.

1. Ensure the bowl in step 2 and the lid in step 6 are Locked well, or the machine will not work.
2. In step 4, 3 type blade could be settled, sure either blade is fixed well on the blade holder. 3- After the operation, you can disassemble the machine by opposite flo w and directio n. 4. Always be careful when handling the blade as they are very sharp.
3.  Only open the lid when the blades are completely stopped

USING THE CITRUS JUICER

Use this citrus juicer to squeeze the juice from citrus fruits(e.g. oranges).

• Pay attention to the capacity line. Once the food approaches the max on the container, please stop operation and pour out food.
• Do not work for more than 3 min. per time, Allow the motor to cool before the next operation for at least 30 min.
• To get the best performance, press the orange not only vertical by also on the left or right side.

Follow the flow pictured step by step to assemble the machine.

1. Ensure the bowl in step 2 and the juicer in step 5 are locked well, or the machine will not work.
2.  After the operation, you can disassemble the machine by opposite flow and direction.
3. Only take the juicer from the machine when the juicer is completely stopped.

USING THE EMULSIFYING DISC

Use for aioli, instant pudding, mayonnaise, whipping cream, whisking eggs, egg whites, and sponge cake mixtures.

• Pease does not use to prepare cake mixtures with butter or margarine or to knead the dough.
• For egg white whisking, please use room temperature eggs. Please ensure the bowl and emulsifying disc is dry and free from grease.
• Clean the emulsifying disc after each use.

Do not use the machine for more than 3 minutes at a time. Allow the motor to cool down for at least 30 minutes before the next operation.

Follow the flow pictured step by step to assemble the machine.

1. Ensure the bowl in step 2 and the lid in step 6 are locked well, or the machine will not work.
2. After the operation, you can disassemble the machine by opposite flow and direction.
3. Only take the disc from the machine when the disc is completely Stopped

To keep the best processing result: use the Max. speed

USING THE TWIN BEATER GEARED WHISK

Use for light mixtures such as egg whites, cream, evaporated milk, and for Whisking eggs and sugar.

1. Heavier mixtures such as fat and flour will damage the item
2.  Do not use the machine for more than 4 minutes per time Cool down the machine for at least 30 minutes before the next operation.
3. For best performance, add 3-4 eggs white each time

Follow the flow pictured step by step to assemble the machine.

1. Ensure the bowl in step 2 and the lid in step 3 are locked well, or the machine will not work.
2.  Ensure the Beaters are well inserted into the mixer Body Unit before operation.
3. After the operation, you can disassemble the machine by opposite flow and direction.
4. Only take the beater from the machine when the beaters are completely Stopped

To keep the best processing result: use the Max. Speed

CLEANING

• Before cleaning please remove the power cord from the socket.
• Do not immerse the housing with the motor in water.
• Do not use any abrasive detergents.
• Please only use a damp to clean the outside of the housing.
• Components that have come into contact with food can be cleaned in soapy water.
• Allow the parts to dry thoroughly before reassembling the device.

PROPER DISPOSAL

This product contains recyclable materials. Do not dispose of this product as unsorted municipal waste. Please contact your local municipality for the nearest collection point.

TROUBLESHOOTING

The dough is too dry| * Running machine and add water through feed

cube, 1 tablespoon at a time until dough cleans the inside of the processing: bowl.

---|---
The dough is too wet| * Running machine and add flour through feed

cube, 1 tablespoon at a time until dough cleans the inside of the processing bowl.

Motor slow down when chopping blade| * Amount of meat may be too much. Remove half and process in two batches.

• For the best result, trim the meat of fat before processing.

Vibrates/moves during processing| * Clean and dry the rubber feet at the bottom of

the unit.

• Also make sure that the maximum load capacity is not being exceeded.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>