MateStar PLM-S05 Platinum Blender Instruction Manual

PLM-S05 Platinum Blender
Instruction Manual

Made in PRC
ROMICO J.T.TRADERS LTD
11 DIOS STR 1056 NICOSIA CYPRUS

Important Safeguards

The following basic safety precautions apply when using electrical appliances, read all instructions before use. And save this instruction manual for future use.
(a)This product is intended for household and indoor use only. Do not use this product for commercial use purposes, and do not use it outdoor.
(b)This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
(c)This product shall not be used by children. Keep this product and its cord out of reach of children.
(d)If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
(e)Cleaning the appliance please use the dry cloth, do not use water cleaning the motor base, it may cause the potential injury from misuse.
(f) The blade accessory is very sharp, please paid attention to handling the sharp cutting blades during cleaning, emptying the bowl, and user maintenance.
(g)Be careful if hot liquid is poured into the product as it can be ejected out of the appliance due to a sudden steaming.
(h)Always switch off the product and disconnect from supply if it is left unattended and before assembling, disassembling, cleaning, or approaching parts that move in use.
(i) Do not immerse the product or allow the supply cord and plug to come into contact with water or other liquid.
(j) The use of accessory attachments, including canning jars, not recommended by the appliance manufacturer may cause a risk of fire, electric shock, or injuries to persons.
(k)Do not let the cord hang over the edge of the table or counter or touch hot surfaces.
(I) Do not place on or near a hot gas or electric burner or in a heated oven.
(m)Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
(n)Where applicable, always attach a plug to the appliance and check that the control is OFF before plugging the cord into a wall outlet. To disconnect, turn the control to OFF, then remove plug from the wall outlet.
(o)Do not use appliances other than intended use.
(p)Avoid contacting moving parts.
(q)Keep hands and utensils out of the container while blending to reduce the risk of severe injury to persons or damage to the power blender. A scraper may be used but must be used only when the blender is not running (does not apply to an acceptable scraper integral with the appliance).
(r) Do not use the product if the blade is curved or damaged.
(s)Never operate the product without any liquid in the jar or empty.
(t) Never try to defeat the interlock switch mechanism, make sure the accessory is completely installed before operation.
(u)Do not overfill the jar. (v)Always operate blender with cover in place.
(w)CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility. If the thermal cut-out operates during use, please switch off the product unplug the plug from the supply main, let the product cold down before use.
(x)WARNING: Do not try to remove the blending jar from the motor base during operation or the blade still rotating. After using the product, just let the blade stop rotating, and then pick up the jar from the motor base.

Product line graph

The whold product

A. Main unit
B. Control panel
C. Jar base
D. Sealing ring
E. Blade holder
F. Glass jar
G. Cover
H. Measuring lid

Control pane

Operation Instruction

1. Rotary switch knob – “0” means Power OFF; “Program” means standby mode, you can use the program function and pulse function; “MIN” to “MAX” is stepless speed control.
2. Pulse function switch – rotate the switch knob to “Program”, keep pressing the switch, the product working by maximum speed.
3. Program function button – 3 different operating mode: “ice crush”, “interval”, “smoothie”. Rotate the switch knob to “Program”, and choose you program. If the product working under “Smoothie” mode, press the “Smoothie” button, the product will stop working and turn into standby mode. If press another function button, the product will turn into the relevant function mode.
4. The max. capacity of the jar is 1.8L, do not allow exceed the max. level mark.
5. This blender is not allowed to operate empty, we suggest 2 parts of soft fruit and 3 parts of water (soft fruit only, such as carrot, apple, etc.), and the operating time no longer than 2
6. When opening the lid, the machine will stop working. If need to start to work again, should close the lid, rotate the switch knob to “0” and choose the speed again.

Key Point Instruction

1. Blending jar – 1.75 liters capacity, glass, SUS 420 stainless steel blade, food contact grade
2. Measuring lid – 85mL capacity.
3. Speed – 22000 rpm high speed, good performance assurance.
4. Voiceless than 85 dB (1-meter from the product, background voice less than 65 dB).
5. Protection:

Safety switch – If the blending jar is not in a position or removes the blending jar during working, the product will not work. You need to put the blending jar in position, rotate the knob to “0” position, and then start to use the product; Overheat protection – If the product overload working for a long time, the thermal limiter will stop the product to protect the motor not overheating. If the thermal limiter operates, please reduce the load of the blending jar, wait for almost 30 min to let the motor cool down, and then use the product again. If the LED light still flashing, but the product still not working, wait for more than 10 to 20 min. Overcurrent protection – If blending very hard food (or very big food) incorrectly, the blade may block, the current limiter will stop the product. If the current limiter operates, please switch off the product remove the very hard or very big food, and then use the product again. Safety lock on the lid – When the lid is open, the machine will stop working.

Cleaning & Maintenance

1. Before cleaning, make sure the power switch and speed regulator is in the “0” position, remove the plug from the supply main.
2. Cleaning the blending jar can use water, but not a chemical agent or other liquid.
3. Cleaning motor base only uses the dry cloth, never use wet cloth clean the motor base, or immerse the motor base into water.
4. If the product operates with abnormal noise or shaking seriously. Please stop using this

product, and send it back to the service agent to check it. Never repair the product by yourself.

Storage

1. After using the product, please repack the product, store it in a dry place and avoid sun
2. Make sure the children could not reach the product.
3. Keep the product dry before repacking.

Technical ratings

Rated voltage: 220 – 240 V
Rated frequency: 50/60 Hz
Rated power: 1800 W
Rated capacity of blending jar: 1.8 L

Environment-Friendly Disposal

You can help protect the environment!
Please remember to respect the local regulations: hand in the non-working electrical equipment to an appropriate waste disposal

PLEASE FILL YOUR DETAILS FOR FUTURE USE
GUARANTEE CARD
CUSTOMER’S DETAILS
NAME OF BUYER_
ADDRESS__
TELEPHONE_____
DETAILS OF SHOP
NAME OF SHOP____
RECEIPT VOUCHER NO._
DATE OF PURCHASE____
APPLIANCE DETAILS
TYPE OF APPLIANCE___
MODEL NO.____
SERIAL NO._____

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>