Godox K1 Cine Light Reflector Panel Kit User Manual
- June 14, 2024
- Godox
Table of Contents
Godox K1 Cine Light Reflector Panel Kit
Foreword
Thank you for purchasing
Introducing the innovative and unique lighting diffusion system by Godox – the Cine Lighting Reflector. With its precision-designed reflector, this cutting- edge system accurately guides the light source to the desired lighting positions, allowing for precise control over the scattering of light while minimizing reliance on flags or frames on the set. What’s truly astonishing is the meticulouslycrafted aluminum coating surface, which boasts only 3% light loss and 100% color accuracy. The reflector is available in four different sizes to accommodate various lighting requirements: 2.75″ × 2.75″, 5.91″ × 5.91″, 9.84″ × 9.84″, 19.69″ × 19.69″.
- DIFF 1(Blue color): Hard ray of light(diffusion rate is 13.2%)
- DIFF 2(Yellow color): Medium soft ray of light(diffusion rate is 52%)
- DIFF 3(Green color): Soft ray of light(diffusion rate is 95%)
- DIFF 4(Red color): Soft strip ray of light(diffusion rate is 94%)
The above data is provided by Godox laboratory.
Lighting Effects Display (Using LiteFlow 50 as an example)
Cautions
- The reflector is prone to scratching. Please use specialized gloves when handling.
- To ensure the reflector remains free from stains, it is recommended to clean it immediately after use. Failure to do so may result in difficulty cleaning the reflector if oil stains are left unattended for an extended period.
- The reflector is prone to scratching, so handle with care during transportation or installation.
Name of Parts
- Reflector
- Slide Rail
- Slot
- Corner Guards
- Safety Wire Hole
Cine Reflector Cleaning Instructions
- Please wear gloves to clean during use
- Spray an appropriate amount of cleaning solution evenly onto the surface of the reflector.
- Let the cleaning solution sit for 15-30 seconds to thoroughly break down any oil stains.
- Use a cleaning cloth to dry the reflective surface.
Note: To ensure cleaning effectiveness, please do not reuse the cleaning cloth.
Installation
Installation of WMS / WMR
Depending on your requirements, you can install either the Wheel Mount Stud WMS or the Wheel Mount Receiver WMR.
- The WMS features a 5/8″ male socket port. By installing WMS you can insert a connecting rod with a 5/8″ female socket.
- The WMR features both vertical and horizontal female socket ports. By installing WMR you can insert a connecting rod with a male socket.
Installing WMS/WMR
- To install WMS/WMR, loosen the wheel on the WMS slider by turning it counter-clockwise.
- Then insert it into the groove at the bottom of the reflector and slide it to the desired position. Once in position, turn the wheel clockwise to tighten and secure it in place.
What’s Inside LiteFlow K1
Optional Accessories
Specification
Model/ Size /Net weight
- LiteFlow 7D1 / LiteFlow 7D2/LiteFlow 7D3 / LiteFlow 7D4/ 2.75″ × 2.75″/ 46g
- LiteFlow 15D1/LiteFlow 15D2 /LiteFlow 15D3 /LiteFlow 15D4/ 5.91″ x 5.91″/ 167g
- LiteFlow 25D1 / LiteFlow 25D2/LiteFlow 25D3/LiteFlow 25D4/ 9.84″ x 9.84″/ 403g
- LiteFlow 50D1/LiteFlow 50D2/LiteFlow 50D3/LiteFlow 50D4/ 19.69″ x 19.69″/ 1.43kg
Contact
Wechat Official Account
GODOX Photo Equipment Co.,Ltd.
- Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District, Shenzhen 518103, China
- Tel: +86-755-29609320(8062)
- Fax: +86-755-25723423
- E-mail: godox@godox.com