TP-Link Tapo Video Doorbell Camera Kit D230 User Manual

Video Doorbell Camera Kit D230
User Manual

User Guide
Video Doorbell Camera Kit

About This Guide

This guide provides a brief introduction to the Video Doorbell Camera Kit and the Tape app, as well as regulatory information.
Please note that features available in Topo may vary by model and software version. Topo availability may also vary by region. All images, steps, and descriptions in this guide  are only examples and may not reflect your actual Topo Doorbell experience.
Conventions
In this guide, the following convention is used:

menus, items, buttons and so on.
Underline| Hyperlinks are in blue and underlined. You can click to redirect to a website.
Note:| Ignoring this type of note might result in a malfunction or damage to the device.

More Info
• Specifications can be found on the product page at https://www.tapo.com.
• Our Technical Support and troubleshooting information can be found at https://www.tapo.com/support/.

Introduction

With Topo Video Doorbell Camera Kit, you always know who’s there. Its rechargeable and removable battery with a low-power protocol extends your usage. No wires means  you can place the doorbell wherever you like. The doorbell is equipped with the starlight sensor and the spotlights, catching more colors. The highly-sensitive starlight  sensor captures higher-quality images even in low-light conditions. The integrated spotlights help enhance your security view with vivid colors even at night.

• 2K 5MP Video – Provides higher-quality security views with 2K 5MP resolution.

• Head-to-Toe View – Compared with the traditional 16:9 aspect ratio, Topo D230’s 4:3 aspect ratio captures more field of view.

• Smart AI Detection and Notification – Smart AI identifies people, pets, and packages, notifying users as needed.

• 180-Day Battery Life△ – The rechargeable and removable battery with a low-power protocol extends your usage.
  △180-day battery life is based on TP-Link’s laboratory testing with 10-20 triggered events per day. Actual battery life may vary based on device settings, use, and environmental factors.

• Wire-Free Placement – No wires means you can place the doorbell wherever you want.

• Color Night Vision – Reveals high-fidelity details and color at night with the starlight sensor.

• Quick Response – Responds to your deliveries without saying a word with customizable responses through the Topo app.

• Flexible Storage Choices – Saves recorded videos on the hub-installed microSD card* (up to 256 GB ) or by using Topo Care* cloud storage services.
  microSD card needs to be purchased separately.
  **Subscribe for cloud storage at https://www.tapo.com/tapocare/.

• Hub as Indoor Chime – Chooses from a variety of ringtones to replace a traditional wired chime.

• Motion Detection – Gets instant notifications when your camera detects motion.

• IP64 Water & Dust Resistant– Helps Topo doorbell performs well even in harsh environments with rain and dust.

• Two-Way Audio – Communicates with others with the built-in microphone and speaker.

Appearance – Doorbell

1 Lens
2 Motion Sensor
3 Spotlight
4 Ring Button| 5 Microphone
6 Status LED Indicates the status of your doorbell.
7 Light Sensor
8 Speaker
---|---

9 SYNC/RESET Button
• Press for 1s: Pair with the hub
• Press and hold for about 5s: Reset the doorbell
10 Anti-Theft Button
When the Anti-Theft Alarm is enabled on the Topo app, an alarm will trigger once the doorbell is removed.
• Press and hold for 5s: Pause the alarm (Continues to alarm when released)
• Press and hold buttons 9+10 simultaneously for 10s: Disable the anti-theft alarm feature

Appearance – Hub

1. SYNC
   Press to pair with the camera, or silence the hub when it rings.

2. RESET
   Press and hold for about 5 seconds until the hub LED quickly blinks red to reset the hub.

3. microSD Card Slot
   Insert a microSD card to record camera videos locally.
   Initialize the microSD card within the Tapo app first.
   ▲ microSD card not included.

4. Status LED
   Indicate the status of your hub.

Hub Status LED

Doorbell Status LED

Charge the Battery

Connect the battery to a power source.

• Charging: Solid amber
• Fully charged: Solid green

Notes:

1. Charge the battery before use. This will take about 5~6 hours.
2. If you want to use the doorbell while charging the battery, we recommend purchasing another battery for your convenience.

Insert the Battery

1. Use a pin to detach the doorbell.
2. Insert the charged battery.

Set Up Your Hub and Doorbell
Follow the steps below to get started with your new hub and camera.

Step 1. Download Tapo App
Get the Topo app from the App Store or Google Play, or by scanning the QR code below.

https://www.tapo.com/app/download-app/

Step 2. Log In
Open the app, and log in with your TP-Link ID.
If you don’t have an account, create one first.

Step 3. Add Your Hub First
Tap the+ button in the app and select your model. Follow app instructions to set up your hub.

Step 4. Add Your Doorbell
Tap the button in the app and select your model.
Follow app instructions to set up your doorbell.

Install a microSD Card

If you want the camera to record videos locally, insert a microSD card to your hub.
Initialize the microSD card within the Topo app.
You can go to Camera Settings > microSD Card in the Topo app to check the card status or format your card.![TP Link Tapo Video Doorbell Camera Kit D230

• Card](https://manuals.plus/wp-content/uploads/2023/04/TP-Link-Tapo-Video- Doorbell-Camera-Kit-D230-Card.png)

Install Your Doorbell

When you finish adding your doorbell in the Topo app, you can stick your doorbell to a clean wall with the included adhesive, or mount it on a wall with the provided mounting template and screws.

Option 1. Stick to a clean wall

1. Attach the included adhesive to the back of the bracket.
2. Stick the bracket with adhesive to a clean wall. Then attach the doorbell to the bracket.

Option 2. Mount to the wall

1. Stick the mounting template to the desired mounting place. Drill two holes according to the template.
2. Insert two anchors into the holes and use the screws to affix the bracket over the anchors. Then attach the doorbell to the bracket.

(Optional) Use 15° Mounting Wedge to Adjust Angle
To adjust the viewing angle of the doorbell, you can use the 15° mounting wedge within the package.

1. After drilling holes, insert two anchors into the holes.
2. Place the bracket above the wedge.
3. Use the screws to affix the wedge and bracket over the anchors.
4. Attach the doorbell to the bracket.

Size of Screws

Authentication

FCC compliance information statement

Product Name: Video Doorbell Camera Kit
Model Number: Topo D230S1

Responsible Party:
TP-Link USA Corporation
Address: 10 Mauchly, Irvine, CA 926181
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide  reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and  used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a  particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
   Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating  in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed  to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.”
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.

FCC compliance information statement
Product Name: AC ADAPTER
Model Number: T090085-2B1
Product Name: USB ADAPTER
Model Number: A8-501000
Responsible Party:
TP-Link USA Corporation
Address: 10 Mauchly, Irvine, CA 926181
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide  reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and  used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a  particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  user is encouraged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is  no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
CE Mark Warning

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
OPERATING FREQUENCY (the maximum transmitted power)
2412MHz—2472MHz (20dBm)
EU Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tapo.com/en/support/ce/
RF Exposure Information
This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.
The device complies with RF specifications when the device used at 20 cm from your body.

UK Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.
The original UK declaration of conformity may be found at https://www.tapo.com/support/ukca/
Canadian Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licenceexempt RSS(s).
Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
Korea Warning Statements:
NCC Notice

BSMI Notice

Video Doorbell Camera Kit Equipment name| Topo D230S1
Type designation (Type)|
---|---|---

Unit PCB

| | Restricted al symbols substances and its chemic|
Lead
(P○b)| Mercury
(H○g)| Cadmium
(C○d)| Hexavalent +c6hromium
(C○r  )| Polybrominated biphenyls (P○BB)| (PB○DE)
| ○| ○| ○| ○| ○| ○
| −| ○| ○| ○| ○| ○
| | | | | |
| −| ○| ○| ○| ○| ○

Note 1：“Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.
Note 2：“○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
Note 3：The “−” indicates that the restricted substance corresponds to the exemption.

Safety Information

• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Adapter shall be easily accessible.
• Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us.
• Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid.
• Do not disassemble, repair or modify the product.
• Do not place near automatically controlled devices such as fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.
• Observe restrictions on using wireless products in fuel depots, chemical plants or when blasting operations are in progress.
• Do not use liquid to clean the product. Only use a dry cloth.
• Never put metal objects inside the product. If a metal object enters the product turn off the circuit breaker and contact an authorised electrician.
• This product is not intended to be used when providing medical care. Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids to  determine if they are adequality shielded from external RF (radio frequency) energy.
• Do not use this product in health care facilities. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
• Do not place heavy objects on top of the product.
• When you leave the product unused for a long time unplug the product from the power outlet.
• This product may interfere with other electronic products such as TV, radios, personal computers, phones or other wireless devices.
• Always follow the local waste and recycle laws when you get rid of the used battery.
• Do not use the product if the casing has been broken. Danger of electric shock.
• Never touch the product with wet hands.
• The mounting height should not be higher than 2 meters.

CAUTION! Risk of fire or explosion if the battery is replaced by an incorrect type
CAUTION! Avoid replacement of a battery with an incorrect type that can defeat a safeguard. Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. Do not leave a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; Do not leave a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Explanation of the symbols on the product label

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

References

• Link: Simple, secure one-click payments
• WiFi Networking Equipment for Home & Business | TP-Link
• Tapo | Smart Devices for Smart Living
• Regulatory Compliance | Tapo
• UKCA | Tapo
• Tapo Care | Tapo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>