MONSTER M2000 Pro Portable Multifunctional Power Station User Manual

: June 6, 2024
: Monster

Table of Contents

Product Safety Guidelines
Product Storage and Transportation
S Series product introduction
Function declaration
User Interface Introduction
How to charge?
Technical Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Portable Multifunctional Power Station Manual
S SERIES

Keep S Series and the accessories dry and do not expose them to high heat.
Never disassemble, puncture, shock, crush, or incinerate the product.
Recycle and dispose of S Series in accordance with the local regulations.
Pay attention to safety when handling the S Series.
People with disabilities or children should use the product under the protection of the supervisor.

Glossary
The following terms are used in this document to indicate various levels of potential harm that may be caused by improper operation.
NOTICE
The instructions, if not properly followed, may result in property damage and minor physical damage.
CAUTION
The instructions, if not properly followed, may result in property damage and serious physical damage.
WARNING
The instructions, if not properly followed, may result in property damage, major accident, and serious injury.
WARNING
Read the ENTIRE user manual to be familiar with the features of this product before operating. Failure to operate the product correctly may result in damage to the product or personal property and cause serious injury. we will not assume any legal responsibility. DO NOT use the product with incompatible components or alter the product in any way without following the instructions provided by the US. Otherwise, you cannot get after-sales service from the US under warranty conditions. These Safety Guidelines include instructions for safety, operation, and maintenance. It is important to read and follow all the instructions and warnings in the user manual before assembly, setup, or using the product.

Product Safety Guidelines

WARNING
Improper use may result in fire, property damage, or personal injury. Make sure to use the product according to the following safety rules and guidelines

Product Use

DO NOT expose the product to any liquids. Do not immerse the product in water. DO NOT leave the batteries out in the rain or near a source of moisture. Moisture in the device could cause short circuits, component failure, fires, or even an explosion.
Must be our official accessories, if necessary, please go to the official website to buy. For the use of other brands of accessories caused by property damage, we do not assume any responsibility.
Never install or remove other modules from the S Series when it is turned on. Do Not plug or unplug other modules when the power of the product is turned on, otherwise, the power interface may be damaged.
The product should be used in temperatures between -20℃ and 60℃. The use of products in environments above 60℃may cause fire or explosion. Using products below -20℃ will severely affect the performance of the product. Allow the product to return to a normal operating temperature before use it.
DO NOT use the batteries in strong electrostatic or electromagnetic environments. Otherwise, the battery control board may malfunction and cause a serious accident during use.
Never disassemble or pierce the product in any way. Otherwise, it may leak, catch on fire, or explode.
DO NOT use the product if it was involved in a crash or a heavy bump.
If the product falls into the water during use, take the product out immediately and put it in a safe and open area. Keep a safe distance from it until it is completely dry. Never use it again and dispose of it properly as described in the Battery DispoSL section below. If the product catches fire, it is recommended to use fire extinguishing equipment in the following order: water or water mist, sand, fire blanket, dry powder, carbon dioxide fire extinguisher.
DO NOT put the machine in a microwave oven or in a pressurized container.
Do Not allow pins, wires, or other metal pieces to insert into the device case, outlets or controls. Metal pieces may short circuit the product.
Avoid collision. DO NOT place heavy objects on the machine.
If there is dirt on any plug or outlet surface, use a dry cloth to clean it. Otherwise, it will cause abrasion and result in energy loss or inability to charge.

Product Charging

Always use our approved charging cables. We do not respond to any damage caused by using non-we charging cables.
When charging, please place the product on the ground with no flammable or combustible materials around. To prevent accidents, never leave the machine unattended during charging.
DO NOT charge a product immediately after a long heavy load, because the product’s temperature may be too high. DO NOT charge a product until it cools down to room temperature. The product may be unable to charge out of the temperature range 0℃ to 45℃, The ideal charging temperature range is 15℃ to 30℃

Product Storage and Transportation

Keep the product out of the reach of children. If any children accidentally swallow parts, please go to a doctor immediately.
If a low-battery warning appears, charge the battery before storing it. Otherwise, long-term storage may cause damage to the battery in the product. Batteries in the product will enter hibernation mode if it is depleted and stored for a long time. Recharge the product can bring the battery out of hibernation.
DO NOT place the product near a heat source, such as a car in direct sunlight, a fire source, or a heating stove.
Store the product in dry environments. Please keep the machine away from water.
Make sure no small metal objects can fall on or around the product while in storage.
Never ship a product with a battery power level higher than 60%.

Product Battery Disposal

Dispose of the product in specific recycling boxes only after a complete discharge. Batteries are hazardous chemicals. Please strictly follow your local regulations regarding battery disposal and recycling.
Dispose of the product immediately if it cannot be powered on after over-discharging.

Product Maintenance

Never store the product in environments below -20℃ or above 60℃.
If the product is not used for a long time, the battery life may be reduced.
Fully charge and discharge the battery at least once every 3 months to keep the battery healthy.

S Series Use Care and Safety Guide
It is forbidden to carry lithium batteries and equipment with a capacity greater than 160Wh on an airplane due to the regulation; Do Not bring this product on flights.

CONGRATULATIONS
You now own the best quality Portable Battery Generator in the world. This brief pamphlet is meant to help you. Please take some time to read it before using the product. Read it through to fully understand how to use the Lithium Generator!

NOTICE
To turn S Series on or off, you need to PRESS and HOLD the ON/OFF system Power Button. To turn on the AC power outlet, you need to PRESS and HOLD the AC Button after turning on S Series. Please follow this introduction step-by-step to be familiar with each of S Series’s ports, buttons, display screens, and more. Get the new machine, please first charge up to 100% before using it.

FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

PRODUCT FEATURES
Multi-function portable generator is made not only for emergencies backup power at home, is very useful for camping, or wherever you need power when you are on the go .with high power/energy, you can keep your electrical devices, appliances, lights and more going for longer. Variety of quick charging modes And a rich product range

The products are divided into the following series
Standard configuration

Built-in MPPT controller, Allows the use of 29-50V solar panels to charge up 100w to 1100 watts. Solar panels are sold separately.
Super quick charge PD output 65W, QC 3.0 USB output, Output of cigarette lighter, DC output, and wireless charging.
DC Adapter charge 29.4V 5A~10A optional

S Series product introduction

|
---|---

DC charge ports
PV charge Ports
ON/OFF Button of Power
LCD display
ON/OFF Button of USB and Type-c
QC3.0 USB and Type-c output ports
ON/OFF Button of AC output
AC output ports
ON/OFF Button of DC Output
DC Output Ports
Output hole of the cigarette lighter
ON/OFF Button of Wireless charging
Wireless charging placement area
Product model or brand
Detailed product specifications
LED prism light induction switch
LED prism light
Heat sink window

Function declaration

DC charge ports
A. S Series has a limit input of 300W, You can use a 29.4V10A DC charger
PV charge Ports (Max 1100w 36V)
Support a maximum of 4pcs 36v250w solar panels to be connected in parallel, Please refer to the following detailed introduction to the use of solar panel charging
ON/OFF Button of Power
Long press 2 seconds to turn it on, long press 2 seconds to turn it off. If you need to use this product, you must turn on the main switch of the power supply before starting other switches. When not in use, please turn off the sub-switch and the main power switch in time to save energy
LCD display
The LCD screen will display various voltage, power, quantity, use status, charging status, and fault indications, Before using this product, please read the manual and function introduction carefully.
ON/OFF Button of USB and Type-C
When the main power switch is turned on, short press the switch to using the corresponding function. To stop use, press to close output.
QC3.0 USB and PD 65W output
4 Pcs QC 3.0 (5V/3A, 9V/2A, 12V/1.5A) output ; PD 65W Out (5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3.25A)
ON/OFF Button of AC output
When the main power switch is turned on, short press the switch to using the corresponding function. To stop use, press to close output. (AC output automatically shuts off if no AC load exceeds 5min)
AC output ports
The connected AC load should be less than the allowable load power of the product
ON/OFF Button of DC Output
When the main power switch is turned on, short press the switch to using the corresponding function. To stop use, press to close output.
DC Output Ports
Max 12v8A , 5.5*2.1mm DC port
Output hole of the cigarette lighter
Max 12.4V10A
ON/OFF Button of Wireless charging
When the main power switch is turned on, short press the switch to using the corresponding function. To stop use, press to close output.
Wireless charging placement area
If your phone has wireless charging capability, this will provide 2 * 10 watts of wireless charging power
Product model or brand
Put on your model and your brand if you order us.
Detailed product specifications
The main configuration and parameter information for the product is shown here
LED prism light induction switch
Long press the right end of the brand metal paste for 2 seconds, turn on and off the lights, and then short press to adjust the brightness.
LED prism light
2pcs 5w LED, It can illuminate 50 square meters
Heat sink window
If the high power output for a long time, please do not block the vent, conducive to the release of heat in the machine

User Interface Introduction

Battery status display
A , remaining battery is shown at 20%,40%, 65%, 80%,100%
B, the battery status bar will increase when charging, discharge work, the battery status bar will slowly reduce
C, low voltage alarm, the battery frame line will flash, Please charge it in time
Percentage of battery capacity
current remaining capacity can estimate the time the load can work
DC voltage (battery voltage )
Display the voltage of the battery when it is not charged; When accessing external power to charge the product, the voltage displayed is slightly higher than the battery voltage.
AC voltage
Displays the current output AC voltage. During use, please note that the load must be the same AC voltage for normal use.
AC output power
Total power of the current load, If the load power is greater than the output power of the product, it will alarm and stop working
grid frequency
100-120V60HZ; 220-240V50HZ
type-c
This symbol is shown when the product is charged with a fast charge or discharged with a fast charge
QC 3.0
the symbol is displayed when USB is used
DC output
Displays this symbol when using a 12 volt DC load
LED lights
This symbol is displayed when the built-in LED lamp is working
The output of cigarette lighter
This symbol is displayed when output with a cigarette lighter
warning
Normal not displayed, When the load is too large, the current output exceeds the limit, display this symbol, please reduce the load power as soon as possible.
Temperature display
Normal display, too high temperature will flash, please stop working, wait for the temperature to drop before us

How to charge?

How to recharge the S Series using solar panels?
If you need to know more about the connection of solar panels, please refer to the Solar Panel User Guide. Here we focus on demonstrating how one to four solar panels in parallel. The S Series can support a 30-50V DC input. When the input exceeds 50V, the S Series’s overvoltage protection will be triggered. Overvoltage may damage the product. Users should follow these instructions. SR does not provide free repair services for any product damage caused by connecting many solar panels to the product or incorrect connection, even during the warranty period.

1. We recommend this type of fittings and connection as a priority
Anderson 4 in 1 cable accessories, can be up to 4 PCS 36V100-275W solar panels connected to the product in parallel for charging, allowing the maximum access of 36 volt 1100W photovoltaic panels. Suitable for outdoor activities and RV trips, However, we do not provide free repair services for any damage to the product caused by the quality issue or improper operation of the third-party solar panels, even in the warranty period.

2. After the series is 36 volts, the maximum cannot exceed 1100 watts
If you have two or four 18 volt solar panel output connectors of MC4, please refer to the following connection.

3. 36V solar panels can be allowed in parallel, up to a maximum of 1000 watts
If you have two or four 36 volt solar panel output connectors of MC4, please refer to the following connection.

4 . Recharge at home using the included charger
With the purchase of this product, you can get a free 29.4V5A charger, you can buy 29.4V10A, this product does not accept any other charger whose parameters do not match for charging. Please read carefully and follow the rules.

Choose the appropriate load according to the product model
Note: If the load power used is too large, it will cause the machine to heat too fast, and start protection shutdown.At this time should reduce the load to use. If you stubbornly use a high power load, resulting in damage to the product, will not be within the scope of a warranty.

Home Use

Outdoor Use

Technical Specifications

MODEL	5-1000	5-1500	5-2000	5-2600	5-3100	5-4000	5-5200
Inverter output	1000W	1500W	2000W	2000W	2000W	2000W	2000W
Peak power	2000W	3000W	4000W	4000W	4000W	4000W	4000W
AC output

110V±10%

Waveform|

Pure sine wave

Frequency Range|

60HZ

Lithium battery
capacity| 1036Wh| 1554Wh| 2072Wh| 2590Wh| 3108Wh| 3985Wh| 5200Wh
Battery voltage|

25.6^29.6V

Life Span|

1500 Cycles to 80%+ capacity

Management Systems| BMS with Over Voltage Protection Overload Protection; Over Temperature Protection Short Circuit
Protection; Low-Temperature Protection Low Voltage Protection; Overcurrent Protection
Solar charge| 20A (29-50V 720w)| 30A ( 29-50V 1100w)| 60A ( 29-50V 2160w )
Adapter charging|

AC 110V–29.4V5A (Additional custom is required for higher current )

Built-in AC charging|

Advance booking is required for this feature

DC charge port|

MAX 29.4V10A

Cigarette lighter
output|

12V10A max 120w

DC output|

2* 12V8A max

USB C1C 3.0 output|

4PCS 5V/3A, 9V/2A, 12V/1.5A

Type-C Output|

Output PD 65W, 5V/3A, 9)//3A,12V/3A,15V/3A, 20V/3.25A

Wireless charging|

2 ” 5V 10W

LED Lighting lamp|

S Series (2’5W, Built-in LED lights with more power require additional customization )

Storage temperature|

-10°C ∼ +45°C

working temperature|

-10°C ∼ +65°C

Warranty|

32 months

Testing and
certification|

UL/CE/FCC/RoHS/PSE/KC

OWES ( mm )| 38e249•290| 384’249’310| 384’249’425|

384’249’470

| 384’249’515| 384’249’650| 384’249’720
WG| 21.8| 26.5| 30.7|

35

| 40.5| 47.3| 62
NG| 19.8| 24.5| 28.5| 33| 38.5| 45| 58

FAQs
The S Series is a versatile tool on many adventures, so simple cleaning will likely be required from time to time.
How do I clean for S Series
Use dry, non-abrasive cloths to wipe. If you need to clean more thoroughly, we recommend that you use a detergent that is used for cleaning mobile phones and computer screens. Do Not expose S Series to lots of liquid.
How do I store S Series?
Please store S Series in a dry and cool place. Do not place it near water. If you need to store S Series for a long time,
please charge the battery to around 85%, in order to extend battery life. Then turn off the main switch and store it at room temperature. Charging once every 2 months.
How do I use S Series safely?
Please use S Series in its operating temperature range. Using S Series out of the optimal operating temperature range may cause S Seriestoexceedits safe and effective working limits. DO NOT immerse S Series in water. Doing so will void the warranty. S Series is not waterproofed.
What’s in the Box