ROBOX R100LEDCCT3-01 Golf 10w-15W LED CCT Selectable 3000K 4000K 6500K Instructions
- June 6, 2024
- robox
Table of Contents
ROBOX R100LEDCCT3-01 Golf 10w-15W LED CCT Selectable 3000K 4000K 6500K
R100LEDCCT3-01
R150LEDCCT3-01
PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCES.
Electrical products can cause death or injury, or damage to property.
If in any doubt about the installation or use of this product, consult a
competent electrician
Note
Product technical information and specification may change over time without
prior notification. For the latest technical information please visit our web
site www.robus.com or
robusdirect.com
-20°C < Ta < +40°C, 220-240V ~ 50/60Hz, Class I, IP65
Luminaire is non-dimmable Suitable for mounting on a normally flammable
surface.
Installation
- Ensure mains supply is switched off before commencing work.
- Ensure there is at least 100mm of free space around the luminaire location.
- Remove trim/ diffuser and LED plate from base of the fitting.
- Drill cable entry and mounting holes in the base.
- Mark appropriate fixing hole positions on wall, check location of buried cables, pipes and other building services before drilling.
- Feed supply cables through cable entry hole and attach base to surface.
- Connect supply cables Live, Neutral and Earth to fitting terminals.
- Move switch on top of the driver to select colour temperature: 3000K,4000K or 6500K.
- Refit LED plate and trim/ diffuser to base.
WARNING: DO NOT CHANGE CCT WHEN THE FITTING IS ON
Market Surveillance:
LS Code of energy efficiency Class E.
R100LEDCCT3-LS & R150LEDCCT3-LS
Disconnect driver input and output connections. Remove LED plate.
Information for the Product user
- Please note the requirement to dispose of Waste Electrical & Electronic Equipment separately from household waste (WEEE marked with crossed out wheelie bin symbol).
- Please consider your role in contributing to re-use and recycling by returning this product at end of life to a collection centre for waste electrical equipment or a Civic Amenity site, or to a retail outlet from which you are purchasing a replacement.
- This equipment may contain substances that are hazardous to health and the environment if disposed of carelessly. It is important that it is separated from normal household waste and recycled in the WEEE chain.
- The “crossed out wheelie bin symbol” on a product indicates this equipment must not be disposed of in normal household waste, but should be disposed of according to local WEEE regulations
The Installation must be carried out by a qualified electrician.
Issue 2 270521
L.E.D lighting & Electrical Distribution Group UC
IRE: Nangor Road, Dublin 12, D12 E7VP, Ireland
UK: Bracknell Enterprise & Innovation Hub, Ocean House, 12th Floor, The Ring,
Bracknell,Berkshire RG12 1AX, UK
Tel: +353 1 7099000
Fax: +353 1 7099060
Email: [email protected]
Website: www.robus.com