xtorm XCP100 20W Transparant Cyber Power Bank Instruction Manual

xtorm XCP100 20W Transparant Cyber Power Bank

SPECIFICATIONS

• 10.000 mAh Li-Polymer / 37Wh
• 1x USB-C PD 20W
  • 1x USB-A QC 18W
• USB-C PD 20W input
• 87x51x40 mm
• 223 grams
• 1x USB-C PD cable
• 1x Manual

When using multiple outputs

• When using 2 outputs
• 1/2 Share 15W

PRODUCT OVERVIEW

1. Output USB-C PD 20W
2. Output USB-A QC 18W
3. Input USB-C PD 20W
4. Power Button
5. Digital Power Indicator

CHARGING YOUR DEVICE

• 3A Connect the USB-C end of the charging cable to the USB-C PD output of the Power Bank and the other end to the input of your device. The charging will start automatically.
• 3B Charging some devices requires a charging cable other than the one supplied. E.g. an Apple Lightning® or a Micro USB cable.

RECHARGING THE POWER BANK

• 4A Connect the USB-C end of the charging cable to output 3 of the Power Bank and the USB end to a wall charger.
• 4B For the fastest charging possible use a 20W USB-C PD charger. This will fully recharge the Power Bank within 2.5 hours.

LED POWER INDICATOR

• 5A Press the Power Button once to display the battery level remaining in the Power Bank via the LED display. Improved Power Button function:
  • single press to turn on/off the diplay
  • double press to fully turn on/off the Power Bank
• 5B The display shows the remaining battery percentage between 0% (empty) and 100% (fully charged).
• 5C The fast charge indicator will light up when you are using the correct cable for fast charging your device. (20W USB-C PD and higher).

IN THE BOX

1. XCP100 Cyber Power Bank
2. USB-C PD Cable
3. Manual

RECYCLING

When recycling this product, please follow WEEE battery recycling procedures. Contact your local recycling organization for more information

XTORM SAFETY CHECK

1. TEMPERATURE CONTROL
   Provided with a temperature control chip that prevents overheating.

2. OVERLOAD PROTECTION
   Protects both the internal battery as well as the battery of the attached device from overcharging.

3. SECURED POWER MANAGEMENT
   Automatically picks the correct charging speed and efficiently divides power between attached devices.

4. SHORT CIRCUIT PROTECTION
   Breaks the circuit automatically when an overcurrent is detected. This protects the Xtorm charger and your device from short-circuit damage.

5. A-CLASS BATTERY CELLS
   We only use the best battery cells that provide the fast charging you need and meet all safety requirements.

6. HIGH EFFICIENCY
   Our power products are built to power your device as efficiently as possible. This ensures the least possible loss of energy during the charging process.

Warnings
Don’t drop, disassemble or attempt to repair the charger by yourself. Avoid exposure to water or high humidity. Don’t be exposed to any heat source. Keep out of reach of children. Don’t use it in the presence of flammable gas. The warranty will lapse in the event of improper use. Telco Accessories has tested the product in a test environment. All statements/declarations made by Telco Accessories about the (operation) of the product are based on the results obtained from such tests. These results/statements/declarations cannot be guaranteed, for example in cases of deviating or injudicious use and/or use in a different environment.

EU DECLARATION OF CONFORMITY

(by EN ISO/IEC 17050-1)

CUSTOMER SUPPORT
support@tag.nl
+31 (0)30 635 4800

TELCO ACCESSORIES GROUP
Hoofdveste 19, 3992DH Houten
The Netherlands

XTORM.EU

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>