VOLTeCK 48010 LED Accent Outdoor Light Fixture Installation Guide
- June 12, 2024
- VOLTECK
Table of Contents
VOLTeCK 48010 LED Accent Outdoor Light Fixture
Product Information
Product Name: Arbotante exterior
Model Number: 48010 ARB-202L
Specifications
- Input Voltage: 127 V~
- Frequency: 60 Hz
- Current: 58 mA
- Lamp Type: LED x 6
- Power: 5 W
- IP Rating: IP44
Important Safety Information
- The mounting of this luminaire should be at least 0.50 m away from any combustible material to avoid the risk of fire.
- Disconnect the power supply before installation and/or maintenance.
- The lamp and parts of the luminaire may become hot enough to cause burns.
Maintenance:
Clean the luminaire with a dry cloth.
Product Usage Instructions
-
Remove the fittings (nuts and bolts) holding the luminaire as shown in the figure.
-
Identify the line (black), neutral (white), and ground (green) wires that are connected to the luminaire, then connect them to the power supply respecting the conductor identification: Line to Line, Neutral to Neutral.
-
Hold the anchor of the flying buttress at the location where it
is to be placed, mark the points to be drilled, and secure it with the fittings. -
Attach the luminaire to the anchor previously mounted in step 2 and secure it.
READ THESE INSTRUCTIONS BEFORE INSTALLATION:
127 V~ 60 Hz 58 mA Lamp type: LED X 6 5 W IP44
WARNING
- The mounting of this luminaire should be at least 0.50 m away from any combustible material to avoid the risk of fire.
- Disconnect the power supply before installation and/or maintenance.
- The lamp and parts of the luminaire may become hot enough to cause burns
Maintenance
Clean the luminaire with a dry cloth.
Installation
Accessories
- anchor
- adjusting nuts
- washers
- screws
- closed nuts
- quick connectors
- Remove the fittings (nuts and bolts) holding 3 the luminaire as shown in the figure.
- Hold the anchor of the flying buttress at the location where it is to be placed, mark the points to be drilled, and secure it with the fittings.
- Identify the line (black), neutral (white), and ground (green) wires that are connected to the luminaire, then connect them to the power supply respecting the conductor identification: Line to Line, Neutral to Neutral.
- Attach the luminaire to the anchor previously mounted in step 2 and secure it.
Imported by Truper, S.A. de C.V. Parque Industrial 1, Parque Industrial Jilotepec, Jilotepec, Edo. de Méx. C.P. 54257 Made in China, Tel.: 76 1782 9100. www.truper.com.11-2022
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>