WORKPRO W102030AU 350mm 14 inch Drop Forged Pipe Wrench Instruction Manual

: June 15, 2024
: WORKPRO

Table of Contents

WORKPRO W102030AU 350mm 14 inch Drop Forged Pipe Wrench
SAFETY WARNING
FEATURES
OPERATING
CLEAN AND MAINTENANCE
Contact Information
Read User Manual Online (PDF format)
Download This Manual (PDF format)

WORKPRO W102030AU 350mm 14 inch Drop Forged Pipe Wrench

SAFETY WARNING

To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.

Children should be supervised to ensure that they do not play with the appliance.
Do not use this product for tasks beyond its capacity. This can damage the tool and may cause injury.
Choose the proper size and type of pipe wrench for the job. Do not use on pipe larger than rated for.
Wear safety glasses or goggles, a face shield (with safety glasses or goggles) and protective gloves when using this product.
Using the wrench can leave sharp burs in the pipe where the jaws dig into the pipe, wearing gloves can help prevent cuts
Always check that all mounting bolts and nuts are securely tightened before using. If any parts are missing, do not use this product until the missing parts are replaced. When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage.
Pipe wrenches are designed for use on round pipe and threaded fittings, or soft round stock. Do not use on hard, square, hexagonal or other non-round material, or the teeth may chip.
Do not use the pipe wrench if it is damaged or worn. A bent handle indicates the wrench has been overloaded and could be damaged.
Do not use the pipe wrench as a hammer or pry bars.
Do not apply high forces to pipes that can crush or oval the pipe, especially thinner wall pipes.
Do no use on live circuits.

INTEND USE:
A pipe wrench is an adjustable wrench that is used, as the name implies, on pipes. Most often, pipe wrenches are used on threaded pipe, usually galvanized steel, black iron or similar metal pipes. A pipe wrench has two serrated jaws that are tightened and dig into the pipe for grip. The top serrated jaw adjusts up and down to fit different size pipes. The unique feature of a pipe wrench is that the teeth will only grip when turning the wrench in one direction.

FEATURES

Heavy-duty drop-forged straight pipe wrench: suitable for all forms of pipework, fit 13mm (1/2″) to 51mm (2″) diameter pipes
Designed with serrated jaws allow the pipe to be gripped firmly so that it does not slip and hurt your hand or arm
To adjust the width of the jaw opening by rotating the knurled knob
The I-beam handle’s wide design provides excellent weight distribution
Compared to traditional wrenches, our wrench is easier to handle and provides greater torque
Easier to tighten/loosen pipes or remove stubborn bolts
Suitable for all pipe-related home improvement repairs that need a tight grip, such as gas tank repair, household plumbing, vehicle maintenance

OPERATING

Before using the pipe wrench, make sure the workpiece is stable and well-supported to prevent tipping and falling during use.
Place the wrench on the pipe so that the mouth of the jaw is facing the direction that you want to turn the pipe.
Make sure the pipe is centered in the jaws
Adjust the jaw by turning the nut so that it fits the pipe snugly.
Pull or push the pipe wrench in the direction you want the pipe to turn.

TIP:

For more delicate or visible plumbing using a cloth as a barrier between the jaws and pipe can prevent scarring the pipe.
Leaving a space permits the jaws to tighten with just the right amount of give.
Only apply force in the direction of rotation. Excessive side loading of the wrench can cause the wrench to slip or be damaged.

CLEAN AND MAINTENANCE

Do not leave water or dirt on your tools. So when you have finished using your pipe wrenches, wipe them down with a clean towel, make sure they are clean and dry, and it’s better to coat them with oil to prevent rusting.
Regularly check whether all parts are in good condition. If any parts are damaged or worn, replace them immediately. Do not use a damaged or worn part, as it may break or malfunction during use.
Store pipe wrenches in a dry and clean place. Avoid exposing them to moisture or extreme temperatures.