ATEN UC3022 CAMLIVE PRO Dual HDMI to USB-C UVC Video Capture User Guide
- June 6, 2024
- Aten
Table of Contents
ATEN UC3022 CAMLIVE PRO Dual HDMI to USB-C UVC Video Capture
Package Contents
- x1 UC3022 CAMLIVETM PRO Dual HDMI to USB-C UVC Video Capture
- x1 USB Type-B to USB Type-C cable
- x1 USB Type-B to USB Type-A cable
- x1 power adapter
- x1 camera mount adapter kit
- x1 user instructions
Hardware Review
Front View
- HDMI 1 & audio status LEDs
- HDMI 2 & audio status LEDs
- analog 1 & 2 status LEDs
- Bluetooth link pushbutton
Rear View
- USB Type-B UVC out
- HDMI program out
- HDMI 2 in
- HDMI 1 in
- power jack
- analog 2 in
- analog 1 in (L/R)
- HDCP switch
- Kensington lock
Requirements
Windows 7 or above, MacOS X 10.13 or later, Android v5 or later with UVC
support
Connector: one USB 3.1 Type-C or Type-A port
CPU: Intel i3 Dual Core 2.8GHz or above
RAM: 4GB or above
Stream: stream software with UVC support*
Hardware Installation
- Plug the power adapter into the power jack.
- Connect your fi rst HDMI source device to the HDMI 1 input port*.
- Connect your second HDMI source device to the HDMI 2 input port*.
- Connect the HDMI program output port to an HDMI-enabled display using an HDMI cable (not included) to display your pre-programmed HDMI content.
- If your laptop only supports USB Type-A interface, connect the USB Type-B to USB Type-A cable (included) to your laptop. Or, if your Android mobile device / laptop only supports USB Type-C interface, connect the USB Type-B to USB Type-C cable (included) to your Android mobile device / laptoprespectively.
- Connect your XLR audio source to the analog 1 input port.
- Connect your RCA audio source to the analog 2 input port.
- Press the Bluetooth link pushbutton to pair up the UC3022 with your app installed mobile device.
- (Optional) For video switching, to display the HDCP protected content to the connected HDMI display (without video capture), please put the HDCP switch to ON
*Note: UC3022 cannot capture HDCP protected content.
Management Software Installation
Download and install the ATEN OnAir Lite app from the Google Play or App
Store to your mobile device. This app is designed for UC3022 to manage and
edit the program results. The ATEN OnAir Lite app includes the following
powerful features:
- Storyboard-like management
- Scenes editor
- Audio sensing switch
- Chroma keyin management
- Audio mixer management
- Remote deck
Please refer to the UC3022 user manual for further details.
Third party video software recommendation*:
- Below lists some examples of supported video recording / live streaming software. All trademarks are property of their respective owners.
OBS:https://obsproject.com
Xsplit:https://www.xsplit.com
Youtube:https://www.youtube.com
Facebook:https://www.facebook.com
Support and Documentation Notice
All information, documentation, fi rmware, software utilities, and specifi
cations contained in this package are subject to change without prior notifi
cation by the manufacturer.
To reduce the environmental impact of our products, ATEN documentation and
software can be found online at http://www.aten.com/download/
Technical Support
www.aten.com/support
Scan for more information
ATEN Website
|
User Manual
---|---
|
---|---
|
The terms HDMI, HDMI High-Defi nition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
© Copyright 2021 ATEN® International Co. Ltd.
ATEN and the ATEN logo are registered trademarks of ATEN International Co.,
Ltd. All rights reserved. All other trademarks are the property of their
respective owners.
Documents / Resources
| ATEN
UC3022 CAMLIVE PRO Dual HDMI to USB-C UVC Video
Capture
[pdf] User Guide
UC3022, CAMLIVE PRO, Dual HDMI to USB-C UVC Video Capture, UC3022 CAMLIVE PRO
Dual HDMI to USB-C UVC Video Capture, USB-C UVC Video Capture, Video Capture
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>