BIG ASS FANS Cold Front 200 Evaporative Cooler User Guide
- June 6, 2024
- BIG ASS FANS
Table of Contents
BIG ASS FANS Cold Front 200 Evaporative Cooler User Guide
Setup
Unpack and Assemble
- Locate the package of four (4) casters and remove from box.
- Lay box on its side and carefully open bottom of box. DO NOT STAND BOX UPSIDE DOWN.
- Install the four casters.
- Stand cooler up on casters and remove box.
Fill Reservoir
- Attach garden hose.
- Turn on water supply. The float valve will shut off the water flow when the cooler is full.
Connect to Power and Turn on
- Plug power cord into a standard electrical outlet.
- Turn on pump switch.
- Allow water to saturate cooling media.
- Turn on fan and adjust to desired speed.
Placement
- Use in an outdoor or well-ventilated indoor space. Evaporative cooling requires adequate air circulation.
- Place on a level surface.
- Place at least 3 ft (0.9 m) from you and do not block the cool breeze. The maximum cooling effect is felt directly in the airflow.
- DO NOT use in an enclosed space such as a small room with closed windows and doors. This will increase the humidity/ moisture and reduce the cooling effect
Tips
Unlike AC units that use chemical refrigerants to reduce the ambient temperature of entire rooms and homes, your evaporative cooler uses air and water to cool specific areas and people. Evaporative cooling requires adequate fresh air and ventilation to allow water to evaporate and cool the air. Increased humidity levels should be expected.
Temperature change of the projected airflow will vary depending on the ambient temperature, humidity, and other variables in your location/application.
IMPORTANT
Evaporative coolers are designed for outdoor and well-ventilated indoor applications. Cooling is dependent upon the cooler receiving plenty of fresh air and ventilation. Temperature change of the projected airflow will vary depending on the temperature, humidity, and other variables in your location.
For Support
Scan QR Code For Support!
