Quest RM6 6-Zone Gooseneck Microphone User Manual
- June 13, 2024
- Quest
Table of Contents
Quest RM6 6-Zone Gooseneck Microphone
Front Panel
-
Indicators
Power (Blue), Signal (Green), Clip (Red), Busy (Red). -
MIC Input
XLR input Jack to Connect a condenser microphone. -
ALL
Select and release all zones. Press and hold for locking all zones. -
Z1 to Z6 – Individual Zone Selection
Select and release each zone 1 – 6. Press and hold for locking the selected zone. -
CHIME
Turn ON and OFF the preannouncement chime -
TALK
Press and hold to start broadcasting after selecting the zone(s). Release the button to end broadcasting.
Rear Panel
-
LINK
Terminals to connect to the PR-Series mixer-amplifier with UTP CAT5/6 We recommend a total distance of up to 200m between the microphone and the mixer- amplifier. Up to 4 RM6 can be connected through the LINK port -
CHIME volume
Adjust preannouncement chime volume -
MIC volume
Adjust microphone level
Performance
Audio Output| 0dB (Balanced)
Audio Input| – 36 dB ±3 dB (Balanced)
Frequency Response| 80Hz~15kHz (-1 dB)
Signal to Noise Ratio| Better than 90dB
Total Harmonic Distortion (T.H.D.)| Less than 0.5%
Serial Interface| RS485 Max 200m (UTP CAT5/6)
Operating Temperature| 0° ~ +40°C
Construction
Net Weight| 0.5 kg
Carton Dimensions (Width/Height/Depth)| 7.9(W) x 2.4(H) x 4.7(D) inches
200(W) x 60(H) x 120(D) mm
21000 Transcanadienne
Baie d’Urfé, Québec, H9X 4B7
Phone: 1-877-374-5266
Fax:888-918-2244
www.eriksoncommercial.com
Copyright © 2022 Exers | Jam. All rights reserved
Documents / Resources
|
Quest RM6 6-Zone Gooseneck
Microphone
[pdf] User Manual
RM6 6-Zone Gooseneck Microphone, RM6, 6-Zone Gooseneck Microphone, Gooseneck
Microphone, Microphone
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>