BIG ASS FANS COOL-SPACE Cooling Media Replacement Instruction Manual
- June 6, 2024
- BIG ASS FANS
Table of Contents
FANS COOL-SPACE Cooling Media Replacement
Instruction Manual
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
WARNING: ELECTRICAL SHOCK HAZARD. Disconnect the power supply before
performing any service or maintenance. Failure to do so may result in serious
injury or death.
CAUTION: The Big Ass Fans product warranty will not cover equipment damage
or failure that is caused by improper installation or use.
COOL – SPACE® 200
Remove screens and old pads
Orient and install new pads, reinstall screens
Dimensions: 12 in. x 4 in. x 21 in. (305 mm x 102 mm x 533 mm)
Quantity: 2
COOL – SPACE® 300
Remove retainer bar
Note: Set the two bolts and two washers aside in a safe location where they will not get lost. You will use them to reinstall the retainer bar.
Remove center pad
Remove side pads
COOL-SPACE® 300 (CONT.)
Orient and install new side pads
Dimensions: 6 in. x 8 in. x 29 in. (152 mm x 203 mm x 737 mm)
Quantity: 2
Black coating should face outward.
Orient and install a new center pad
Dimensions: 12 in. x 8 in. x 29 in. (305 mm x 203 mm x 737 mm)
Quantity: 1
Black coating should face outward.
Reinstall retainer bar
Documents / Resources
| BIG
ASS FANS COOL-SPACE Cooling Media
Replacement
[pdf] Instruction Manual
COOL-SPACE, Cooling Media Replacement, COOL-SPACE Cooling Media Replacement,
COOL-SPACE 200
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>