Big Ass Fans 007180 AirEye Low Rider Pedestal Fan Installation Guide

Big Ass Fans 007180 AirEye Low Rider Pedestal Fan

Product Information: – Fan Size: 20 in. (508 mm), 24 in. (610 mm), 30 in. (762 mm), 36 in. (914 mm) – Fan Weight: 32 lb (14.5 kg), 38 lb (17.2 kg), 45 lb (20.4 kg), 67.1 lb (30.4 kg) – Input Power: 277 VAC, 1, 50/60 Hz – Max Amps: 5.1 A, 3.1 A, 3.0 A, 5.2 A, 3.0 A, 3.1 A, 9.7 A, 5.5 A, 4.5 A – Max Power: 386 W, 392 W, 508 W, 396 W, 400 W, 501 W, 384 W, 390 W, 508 W, 711 W, 669 W, 716W
Parts and Hardware: – Front Guard – Hinge Pin Eyelets – Blade Assembly – Set Screws – Flange Nuts – Rear Guard – Motor ThruBolts – Main Mounting Hardware – Blade Assembly Retainer – Keyhole Mounting Slots – Angle Adjustment Hardware – Safety Hinge Pins

Usage Instructions: 1. MOTOR – Make sure the fan mount has been installed as specified in the mounting instructions. – To adjust the motor angle, loosen the main mounting bolt and angle adjustment bolt. 2. HARMONICS FILTER (36 IN. [914 MM] FANS) – Install the harmonics filter if included with your fan. 3. REAR GUARD – Align the mounting slots and secure the guard. 4. BLADE ASSEMBLY – Ensure the blade assembly is fully seated onto the shoulder of the shaft. – Align the set screws to the flats of the shaft. – Always install the retaining ring. 5. FRONT GUARD – Align the eyelets and fasten the hinge pins starting with the topmost hinge. 6. SAFETY CABLE – Do not attach the safety cable to the fan mount under any circumstances. 7. HARMONICS FILTER (20, 24, AND 30 IN. [508, 610, AND 762 MM] FANS) – Install the harmonics filter if included with your fan.

Electrical Connections

Fan Only: Connect the power cord directly to the fan. – Fan with Occupancy Sensor: Connect the power cord to the occupancy sensor and then to the fan. – Fan with Harmonics Filter: – 20, 24, and 30 in. (508, 610, and 762 mm) Fans: Connect the power cord to the harmonics filter and then to the fan. – 36 in. (914 mm) Fans: Connect the power cord to the harmonics filter and then to the fan. – Fan with Occupancy Sensor and Harmonics Filter: – 20, 24, and 30 in. (508, 610, and 762 mm) Fans: Connect the power cord to the harmonics filter, then to the occupancy sensor, and then to the fan. – 36 in. (914 mm) Fans: Connect the power cord to the harmonics filter, then to the occupancy sensor, and then to the fan. – POWER WIRING: 277 V FANS: – Single Phase (L1 + L2 + PE): Connect the supply power to L1/AC Line, L2/AC Line, and Earth/PE. – Single Phase (L1 + N + PE): Connect the supply power to L1/AC Line, AC Neutral, and Earth/PE. Note: Occupancy sensor not applicable to 277 V fans. Product Certification: – Conforms to UL 507: Electric Fans – Certified
to CSA C22.2 No. 113: Fans & Ventilators

Operating Instructions and Maintenance:
bigfans.com/support

CAUTION: To reduce risk of personal injury, use only with mounting assembly models 007180, 007262, 009182, 007265, and 008001 manufactured by Big Fans.

TECHNICAL SPECIFICATIONS

Fan Size

| ****

**Fan Weight***

| ****

Input Power

| ****

Max Amps

| ****

Max Power

---|---|---|---|---

20 in. (508 mm)

| ****

32 lb (14.5 kg)

| ****

100–120 VAC, 1Ф, 50/60 Hz

200–240 VAC, 1Ф, 50/60 Hz

277 VAC, 1Ф, 50/60 Hz

| ****

5.1 A

3.1 A

3.1 A

| ****

386 W

392 W

508 W

24 in. (610 mm)

| ****

38 lb (17.2 kg)

| ****

100–120 VAC, 1Ф, 50/60 Hz

200–240 VAC, 1Ф, 50/60 Hz

277 VAC, 1Ф, 50/60 Hz

| ****

5.2 A

3.1 A

3.0 A

| ****

396 W

400 W

501 W

30 in. (762 mm)

| ****

45 lb (20.4 kg)

| ****

100–120 VAC, 1Ф, 50/60 Hz

200–240 VAC, 1Ф, 50/60 Hz

277 VAC, 1Ф, 50/60 Hz

| ****

5.0 A

3.0   A

3.1 A

| ****

384 W

390 W

508 W

36 in. (914 mm)

| ****

67.1 lb (30.4 kg)

| ****

110–120 VAC, 1Ф, 50/60 Hz

200–240 VAC, 1Ф, 50/60 Hz

277 VAC, 1Ф, 50/60 Hz

| ****

9.7 A

5.5 A

4.5 A

| ****

711 W

669 W

716 W

PARTS AND HARDWARE

1. MOTOR
   Make sure fan mount has been installed as specified in the mounting instructions.
   To adjust motor angle, loosen main mounting bolt and angle adjustment bolt.

2. HARMONICS FILTER (36 IN. [914 MM] FANS)
   Select regions only. Install if included with your fan.

3. REAR GUARD
   Align Mounting Slots
   Secure Guard

4. BLADE ASSEMBLY
   Ensure blade assembly is fully seated onto shoulder of shaft and set screws are aligned to flats of shaft.

5. FRONT GUARD
   Align Eyelets

Fasten Hinge Pins
Start with topmost hinge.

6. SAFETY CABLE
   Do not attach safety cable to fan mount under any circumstances.

7. HARMONICS FILTER (20, 24, AND 30 IN. [508, 610, AND 762 MM] FANS)
   Select regions only. Install if included with your fan.

ELECTRICAL CONNECTIONS

Fan Only
**Fan with Occupancy Sensor***

ELECTRICAL CONNECTIONS: FAN WITH HARMONICS FILTER

*ELECTRICAL CONNECTIONS: FAN WITH OCCUPANCY SENSOR AND HARMONICS FILTER**

POWER WIRING: 277 V FANS

Conforms to UL 507: Electric Fans
Certified to CSA C22.2 No. 113: Fans & Ventilators

AIE-INST-321-ENG-01 REV H 03/31/2022 © 2020 DELTA T LLC ALL RIGHTS RESERVED.

References

• Support - Big Ass Fans®

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>