kogan KALED32EH7520SVA 32-Inch Smart LED TV User Guide
- June 6, 2024
- Kogan
Table of Contents
32″ SMART LED TV
SERIES 7 EH7520
(KALED32EH7520SVA)
User Guide
COMPONENTS
| A. Kogan 32” SMART LED TV | D. AAA battery (x2) |
|---|---|
| B. Remote control | E. Quick-start guide |
| C. Stand (x2) | F. Warranty cord |
NOT INCLUDED
Phillips head screwdriver, antenna cable, broadband internet connection.
REMOTE CONTROL OVERVIEW
- : Turn on the TV or enter standby mode
- : Turn off the sound and turn on when press again
- 0 ∼ 9: Figures 0-9 are used to directly input
- : Press to display Electronic Program Guide and select the favorite channel
- : Press to enter Teletext when play the program
- : Input source selection button
- : Press to enter the Home Page
- V+ : Increase the volume
- V- : Decrease the volume press again
- P∧ : Increase the program
- P∨ : Decrease the program channel number
- : Start system menu and channels display
- : Press to display the source
- : To confirm the choice with program the highlighted menu item
REMOTE CONTROL OVERVIEW
15. : Press these buttons to select items
16. : Press these buttons to select and adjust items
17. BACK : Go back to the previous step
18. EXIT : Press to exit the OSD menu
19. : Press to launch the Netflix
20. : Press to launch the YouTube
21. : Press to launch prime video app
22. USB : Press to enter USB mode
23. Colour Buttons: Press these buttons aCCording to different prompts
24. : Press to fast reverse in USB mode
25. : Press to fast forward in USB mode
26. : Press to play the video and press again to pause the video
27. : Press to start recording the program
28. : Hold on or off for current page display
29. : Press to change the language when palying the stream which contains
multi-language
ASSEMBLY AND INSTALLATION
BEFORE YOU GET STARTED
Spread cushioning flat to lay the TV on. This will help to prevent damage.
-
Stand assembly
a. Align the stand to the corresponding openings on the TV body, ensuring L and R letters match.
b. Insert each stand into the hole until the buckle locks into place. You will hear a ‘click’ to confirm it is secure.
-
Remote control assembly
a. Open the battery compartment cover on the back side.
b. Insert two 1.5V AAA size batteries, making sure to match the polarity markings (+ / -) of the batteries with the diagram inside the compartment.
c. Replace battery compartment cover.
-
Connect to antenna
a. Connect an antenna cable (not supplied) via the ‘ANT’ input port at the back of the TV.
b. Ensure the antenna cable is also connected to a working antenna, either via an antenna wall socket in your home, or directly.
-
Turning TV on
Connect the power supply, enter the standby mode (red light), press the power button of the TV or the power button on the remote control to turn on the TV.
TURNING TV OFF
Press the POWER button on the remote control to enter standby mode. To
power down the TV completely, unplug the power cord from the power outlet.
Do not leave your set in standby mode for long periods of time. If you will
not use the TV for a long time, it is recommended to unplug the set from both
the power outlet and aerial.
FIRST TIME SETUP
The first time you switch your TV on, it will automatically be in the initial setup mode. This will guide you through the whole setup process of selecting your desired language, connecting to the internet, signing in to your account and tuning in TV channels.
Choosing Your OSD Language
-
Press the buttons to highlight your desired OSD language then press the OK button.
-
Data Collection and Firmware Updates Notice page will appear. Press the buttons to select the menu option.
FIRST TIME SETUP
VIEWADDITIONAL DETAILS
Go to view more detailed firmware/software network download update
instructions.
ACCEPT
Accept all agreements and agree to the firmware/software network to
automatically download updates
3). If you select VIEW ADDITIONAL DETAILS, the detailed firmware/software
network download update instructions will display. Initially, the default
focus will be on the text description section.
Press the buttons will drop the text to the bottom. Press the buttons, ACCEPT
ALL will highlight. Press the buttons then the OK button to confirm the
selection
ACCEPT ALL
Accept all protocol sections and agree to the firmware/software network to
automatically download updates.
ACCEPT AUTOMATIC UPDATES
Accept all protocol parts and manually select whether to agree to the
firmware/software network download update if there is a firmware/software
update.
ACCEPT USAGE INFORMATION COLLECTION
Suppliers accepting the agreement section collect some non-personal user
information.
DECLINEALL
Reject all protocols to disable firmware/software network updates.
4). Press the buttons to select your country where you will operate the TV.
Press the OK button to confirm.
CONNECTING TO THE INTERNET
You have 2 options when connecting your TV to the internet. You can connect wirelessly via Wi-Fi or connect your TV to yourrouter directly by connecting a LAN cable (wired connection). Choose your connection method and follow these instructions.
Wi-Fi Network
- Press the buttons to highlight Wi-Fi Network then press the OK button. Your TV will automatically scan for your wireless network, then show you a list of networks that its found. Highlight your network and press the OK button.
- Use the buttons to nevigate the keypad in the screen to entry your Wi-Fi password, then press the OK button to select the characters. Finally select the and press the OK button. In a second or two your TV will show Success after connection successful.
WIRED Connection
If you have connected your ethernet cable to the LAN socket on the back of
your TV, select Wired Network and the press the OK button. Then select Connect
to start connect to the internet.
SKIP Connection
- If you do not need to connect to the network, select Skip and press the OK button to confirm.
- A pop up menu will be display. If you want to go back the network setting page, select Set up Network. If you want to confirm to skip the network setting, select Skip. Then will enter to Input Source menu and start TV Tuning.
SIGNNING IN TO YOUR NETFLIX ACCOUNT
Press the buttons to select Start Netflix then press the OK button. You will
now be asked to sign in to your Netftix account. If you don’t already have an
account you can set one up on your TV go to the ‘Join Now’ section.
If you want to temperary skip the Netflix setting, select Skip to enter to
Input Source menu and start TV Tuning.
If you complete Netftix setting, press the EXIT button to leave and press the
button and select Programme, then select Auto Tuning for TV tuning.
TUNING
If you select Skip option in Netflix setting page, then you now need to tuning
in your TV so you con watch LIVE TV (broadcast TV). If you watch TV via a Set
Top Box you con skip this section by selecting the correct HDMI input source.
DVB-T
-
Input Source page shown on the TV, use the buttons to select TV. then press the OK button.
-
In DVB Tuning Type page, use the buttons to select DVBT.
-
Your TV will now start scanning for all the available TV channels. This operation may take a few minutes. The display will show the progress of the tuning and the number of channels found
-
If you want to skip the DTV tuning, press the OK button to interrupt the tuning half way. A pop-up screen will be displayed, press the button to select YES to confirm. e. Your TV is now setup and ready to watch.
DVB-C
-
Input Source page shown on the TV, use the buttons to select TV. then press the OK button.
-
In DVB Tuning Type page, use the buttons to select DVBC
-
Your TV will now start scanning for all the available TV This operation may take a few minutes. The display will show the progress of the tuning and the number of channels found.
-
If you want to skip the tuning, press the OK button to interrupt the tuning halfway. A pop-up screen will be displayed, press the button to select YES to confirm.
-
Your TV is now setup and ready to watch.
HOME Menu
-
Press the button to display the home menu.
-
Use the buttons to switch between the Apps, NETFLIX, Input, and Settings sections of the Home page.
-
Use the buttos to select the desired App, input source or setting, then press the OK button to confirm.
BASIC TROUBLESHOOTING
Poor picture and sound quality
- Try a different channel
- Adjust the antenna
- Check all connections
No picture or sound in TV status
- Try another channel
- Press the TV/AV button
- Make sure TV is plugged in
- Check the antenna connection
No sound or sound is too low at maximum volume
- Check the volume settings on any external speakers connected to your television
- Adjust the TV volume accordingly
- Check another channel or input
- Check that MUTE hasn’t been turned on
No colour, wrong colour or tints
- Make sure the program itself is broadcast in colour
- Select the picture menu, then adjust the colour and tint submenus
Picture rolls vertically
- Check all connections
Blurred or snowy picture, distorted sound
- Check direction, location and connections to your antenna
- Issues may be caused by the use of an indoor antenna (poor signal)
Remote control malfunctions
- Replace remote control batteries
- Check battery terminals
- Remote is out of range, move closer to TV
- Remove any obstructions between remote and IR sensor of TV
- Make sure the power cord to your TV is plugged in and turned on
Image is not centred on the screen
- Adjust the horizontal and vertical position
“No Signal” on HDMI source
- Test the device with a different HDMI cable
- Plug the device into another HDMI port
- Try a different device connected to the same cable and port
- Perform a factory reset on your TV
For our full TV troubleshooting guide and extended User Manual for this TV, head online tohelp.kogon.com
NOTES
Need more information?
This is a Quick Start Guide, and while we hope that this has given you the assistance needed for a simple set-up, a full user guide outlining all of this product’s instructions and features can be found online at help.kogon.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>