Fontastic BAXX Wireless Headphone User Manual

Fontastic BAXX Wireless Headphone

The wireless on-ear headphone BaXx is your perfect companion to listen to music and for phone calls.

Package contents

• Fontastic® Headphone BaXx
• Micro-USB charging cable
• This user manual

If any of the above pieces is missing, please pack the product again and return to dealer.

Overview

1. Microphone
2.  3.5 mm Line-in connector
3.  Micro USB connector
4.  Volume- button | Previous title
5.  On/Off | Telephone | Musik Start/Stop
6.  Volume+ button | Next title
7.  LED indicator
8.  Height adjustment
9.  Headphone strap
10. . Speaker

LED functions

• Connected Blue: lights up permanently
• Not connected: Blue and red flash alternately
• Incoming call: Blue lights up permanently
• Charging Red : lights up permanently
• Pairing Blue: and red flash alternately

Getting Started

Charging the battery
The Fontastic® BaXx is equipped with an internal rechargeable battery. Connect the BaXx with the micro USB cable which is included in the package contents. The cable can be connected to a computer or a standard USB power supply.
The red led of the BaXx condition is indicated by an acoustic signal.
Note: Charge BaXx for at least 3-4 hours before initial use.

Adjustment
BaXx offers the possibility to adjust the loudspeakers in height to the optimum position for you. To do this, hold the loudspeaker unit up and pull the headphone strap (8) upwards. Adjust the headphones in this way until the ear pads are exactly on the ear.

Switching On /Off
To switch on, press the multifunction button for 3 seconds, an acoustic signal sounds, the blue and red LED flash alternately. To switch off, press the multifunction button for 3 seconds, an acoustic signal sounds, the red-blue LED flashes 2 times and goes off.
Pairing
BaXx must be paired with a Bluetooth® device before use. This is a two-part process; one part is carried out on the headphone and the other is carried out on the other Bluetooth® device.
Note: Please note that different mobile phones may require different pairing methods.

1. In the off state, press and hold the multifunction button for 3 seconds to turn on. Keep the button pressed and wait until the blue and red LED flashes alternately. This indicates the pairing mode.
2.  Use your Bluetooth® enabled device to search for Bluetooth® audio devices.
3.  The Bluetooth® device should indicate that it has found „BaXx“.
4.  Confirm pairing with BaXx. Enter „0000“ if you are asked for a pairing code.

If you are unsure about the pairing procedure of your Bluetooth® device, please check your device manual. When using a Bluetooth® transmitter without display, set it to pairing mode and wait a few seconds until the connection with BaXx is established.
Note: If the connection is lost or the transmitter is temporarily disconnected, briefly press the multifunction button. BaXx will then try to restore the connection.

Music playback

Start music playback on the Bluetooth® source which is paired with the BaXx. The music is transferred to the BaXx. Stop the music playback on the Bluetooth® source to interrupt the streaming. To start or stop music playback via the BaXx, press the Music Start/Stop button (5) once. During music playback, the LED blinks blue. You can use the BaXx as a wired headphone without Bluetooth® function with an 3.5mm jack cable. For that purpose connect the cable with the BaXx and the desired device and start music playback.

Music control

• To play or stop music playback, briefly press the Start/Stop button (5).

• To skip to the previous track, press and hold the Volume- button (4).

• To skip to the next track, press and hold the Volume+ button (6).
  Note: The mobile phone must support the A2DP and AVRCP profile for music streaming and control. The buttons have no function when using the wired connection. Use the audio source to control the music and volume.
  Hands-free features
  With its built-in microphone and intelligent noise reduction, the BaXx is perfectly suitable for phone calls.
  Answer/ending calls
  To accept an incoming call, briefly press the Telephone button (5). To end a call in progress, briefly press the Telephone button (5).
  Redial
  Press the Telephone button (5) twice to redial the last dialled number.
  Volume setting

• To increase the volume, press and hold the volume + button (6) until the desired volume is reached.

• To decrease the volume, press and hold the volume – button (4) until the desired volume is reached.

Technical data:

•  BT Version 5
• Profiles: Headset, Handsfree, A2DP, AVRCP
• Range: aprx. 10m
• Input: 5V DC
• Frequency Response: 20Hz-20KHz
• Impedance: 32 Ohm
• Built-in high-performance microphone
• Audio line-in
• Status LED: blue/red
• Micro USB charging port
• Battery type: 180 mAh Li
• Operation time: aprx. 6 hrs.
• Weight: 203 g

Safety advice:

• Do not open the device
• Do not hold the device under water
• Keep it safe from humidity
• Do not connect the adapter to the device by using force
• Keep the device away from children
• Disconnect electronic devices from the power when not using them for longer time.
• Do not use the device when it has visible defects.

In case you need technical support, please contact our support team by e-mail under service@fontastic.eu.

Registration and Safety

Certification/General Information
We hereby declare, that this device carries the CE mark in accordance with the regulations
and standards. It conforms with the fundamental requirements of the (RED) 2014/53/EU directive. The full text of the EU declaration of conformity is available at the following internet address: www.d-parts.de/Konfo

Note on environmental protection:
After the implementation of the European Directive 2012/19/EC in the national legal system, the following applies:
Electrical and electronic devices may not be disposed of with domestic waste. Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details of this are defined by the national law of the respective coun-try. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, re-using the materials or other forms of utilising old devices, you are making an important contribution to protecting our environment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>