CACTUS Blaze 2 Teen Smart Watch User Manual
- June 6, 2024
- CACTUS
Table of Contents
CACTUS Blaze 2 Teen Smart Watch
Setting
Use FitCloudPro App on iOS or Android smart phone to set the BLAZE 2 as
follows:
Note: hardware and system of phone should meet the below requirements:
Download FitCloudPro App
Search and download the FitCloudPro App from the Apple Store or Android App store Scan the QR code below with your mobile phone to download and install FitCloudPro
Charging your Watch
Before using your CACTUS BLAZE 2 ensure it is fully charged. Attach the supplied charging cable to the metal points on the back of the watch. The charging cable has magnetic suction and will adhere to the charging pointsConnect the other end of the charging cable to a USB wall charger, or computer USB port. Charge until battery fully charged. You are now ready to wear the CACTUS BLAZE 2. Adjust the length of the band and fasten the watcharound your wrist.
Pairing your watch
After downloading and installing the App, a new user must first register (join) the App with a valid email address and password. Please give consent for the App to use Bluetooth to pair with your watch.
App Connection (for data transfer)
Make sure Bluetooth is ON in your mobile phone and open the FitCloudPro App on
your mobile phone. The first time you use the BLAZE 2 watch, you will be asked
to complete your personal details in the App to calibrate the device – your
gender, age, weight and height. The App will prompt you to bind the device
with your phone. The App will auto search until it finds the watch
- keep the watch close to the phone and click on the searched device T98 to connect & pair with the App FitCloudPro on your mobile phone.
After the watch is successfully bound / paired, the App will automatically save the Bluetooth address, and the watch will automatically connect to the phone. The BLAZE 2 smart watch saves 7 days of data offline. Please ensure the App is opened so that synchronization of data can occur, and historical data can be viewed in the App. To change the time presentation from 12/24 hours, and to choose metric or imperial measurements, go to the App go to Time formats or go to Unit formats.
Main Interface Selection
As shown below, in the main interface, long press/hold the screen for 3
seconds to select different main interfaces. There are 5 main interfaces for
selection.
Method of Operation
Power on/Back key:
- Press and hold for 5 seconds to power on/off.
- Short press to turn on/off the screen
Long press on the screen: In the main dial interface, press and hold the
screen for 3 seconds to select different dials.
Left slide: Go to the next screen
Swipe right: Go back or the previous page.
Skip up: In the main dial interface, the slide-up screen allows you to
quickly view notifications.
Sliding: In the main dial interface, the slide screen can quickly enter
the setup menu.
Watch navigation
Functions & Features
Movement
- The watch records and displays the number of steps you walk each day, the calories burned and the distance travelled. More detailed analysis and data records can be viewed in the App.
Sleep
- The watch records and displays the total number of hours of sleep. More detailed analysis and data records can be viewed in the App. The watch must be worn during sleep in order to record sleep data.
Heart Rate
- The watch records and displays heart rate throughout the day. Click on the heart rate interface to measure the current heart rate. More detailed analysis and data records can be viewed in the App.
Blood Pressure
- Click on the blood pressure interface to measure the current blood pressure value. More detailed analysis and data records can be viewed in the App
Blood Oxygen
- Click on the blood oxygen interface to measure the current blood oxygen value. More detailed analysis and data records can be viewed in the App.
Weather Information
- The weather page shows the current weather as reflected on the connected phone. The location must be switched on in the App and in settings. Weather information cannot be updated if the watch is disconnected from the App for a long time.
Exercise
- 5 sports modes to choose from: walking, running, cycling, hiking, basketball. To commence an exercise session, tap on the selected mode, and the countdown to begin measurements will start. Measurements include duration of exercise, steps, calories burned, distance, and heart rate. During cycling & basketball sports modes, the watch does not calculate steps and distance. To end the session, click on the key, tap on the stop button. More detailed analysis and data records can be viewed in the App.
Messages
- The watch can display notifications & messages from the connected phone; in the App, you can select to switch notifications on/off.
Body Temperature
- Click on the body temperature interface to measure current body temperature. Measurement commences when 60 second countdown begins.
- Special precautions when measuring body temperature – please wear the Blaze 2 for 5 minutes before taking a temperature measurement.
- It is recommended to measure body temperature under ambient temperature of 18-32 C otherwise it will affect the measurement accuracy.
- Skin temperature – human real-time epidermal temperature.
- Body temperature – actual body temperature measurement.
Other Features
- Other functions of the watch include stopwatch timer, multiple vibration alarms, find my phone, sedentary alerts, hydration reminders, women’s health settings, screen brightness adjustment, factory reset switch, shutdown switch.
- When connected, the watch can be used as a remote control for the phone’s camera. When the camera (shutter) in the App is opened, you can trigger the phone’s camera by shaking the watch. Permission must be granted for camera and album/photos access
Caution
- do not use charging voltage greater than 5V or charging current greater than 2A adaptor, charging time of 2-3 hours
- do not charge the watch when wet
- This watch is an electronic monitoring product, not a medical device and measurement data is for personal reference only
WARRANTY
This product is warranted to be free from defects in materials and workmanship for a period of 1 year from date of purchase. This warranty covers manufacturing and mechanical defects but excludes band and lens damage. www.cactuswatches.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>