CACTUS ID115 Plus HR Surge Smart Watch User Manual
- June 6, 2024
- CACTUS
Table of Contents
- CACTUS ID115 Plus HR Surge Smart Watch
- Setting
- Download VeryFitPro
- Product Activation & Installation
- Touch key
- Function Introduction
- Event Reminder in Sports Mode
- Camera Mode Control
- More Alerts / Reminders
- Basic Specifications
- Wearing and Maintenance
- FAQs
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CACTUS ID115 Plus HR Surge Smart Watch
SOFTWARE COMPATIBILITY
Setting
Use VeryFitPro App on 10S or Android smart phone to set the SURGE as follows:
Note: hardware and system of devices should meet the below requirements:
Download VeryFitPro
Search and download “VeryFitPro” from the Apple Store or Android App store
Scan the QR code and download
Note: If you have a problem with scanning the QR code, please copy the
link & open it in your web browser
Product Activation & Installation
Before using your CACTUS SURGE ensure that it is fully charged. When it is fully charged, it will automatically power on. Detach the band: pull off the strap (on both sides) of the device body.
Charge the battery: Insert the chip-mounted end of the device body into the USB interface to activate the product by charging (be cautious not to reverse the polarity, and to comply with the required voltage and current: SV / S00mA) When inserted in the correct position to charge, a red light will come on. When fully charged (battery image will show full charge) attach both bands to the device. You are now ready to wear the CACTUS SURGE -adjust the length of the band and fasten the device around your wrist.
Touch key
Single click the touch key: Interface switch Press and hold the touch key: Enter
Make sure Bluetooth is ON in your smart phone, and open the VeryFitPro app on your smart phone.
In the app, when adding a device and selecting the right band from the search list, please slide the screen of the SURGE to wake up the device and then complete the connection (“bind successful”)
Know your device
-
Wearing Method
Wear the device on your wrist horizontally the same method as wearing watches. -
Heart Rate Monitoring
To monitor heart rate more accurately, please wear the device on top of your wrist and a bit tighter than usual when you are exercising. -
Heart Rate Monitoring
Automatic heart rate monitoring is ON as default. and the device monitors heart rate all day automatically. -
Interface
Click the touch key to display successively
Function Introduction
Time Mode
Time dial can be switched on as follows:
- App>Device>More> Time Format.
- Choose 12hr or 24hr mode
- Touch the screen to wake device – app will show a tick next to time format <more setting done. Click the touch key to enter next mode
1.2 Data Mode
- Click the touch key to enter the next mode: Heart Rate Mode
- Press and hold the touch key for 2s to enter the sub-mode of “Data Reading”
Data Reading Sub-Mode
- Click the touch key to enter the next sub-mode
- To go back to the Data Reading Mode click the touch key one more time
Heart Rate Mode
When in heart rate mode for ls, the SURGE starts to monitor heart rate and the figure like _/\f,.- is displayed before the correct data is reached. When the heart rate is detected, data is displayed numerically.
Alarm Clock Mode
Note: Alarm clock function should be turned on in App for the alarm clock to be displayed .
Click the touch key to enter the next mode:
Sports Mode
Press and hold the touch key for 2s to start/close alarm clock
Sports Mode
Click the touch key to enter the next sports mode; and in case there are no
other sports modes, it will go back to the time mode.
Note: Types of Sports mode can be selected in App – 3 types of sports can
be selected from an optional choice of 12 in the app. (More>Activity
Display>Add+>Select Activity Mode)
Sports Start Mode
After the countdown interface of 3-2-1-GO the device has entered the sports Underway Mode.
Sports Underway Mode
Click the touch key to enter the next sub-mode of “Sports Underway”. Press and
hold the touch key for 2s to enter any interface of Data Reading. Press and
hold 2s to exit the sports mode.
Note: The speed and distance of cycling can be displayed, but App needs
to be connected and the cycling and App needs to start at the same time.
Sports Stop Mode
On exiting Sports Mode
- If exercise lasts less than 1 minute notification will show “short training session not saved”.
- If exercise lasts more than 1 minute notification will show “Good Job”.
- Sports Data Display Mode – Click the touch key to enter the next Sports Data Display mode – and a single click of the final interface will return you to the first interface of Sports Mode
Event Reminder in Sports Mode
Reminder of exit from Sports Mode
If there is no activity in a 15 minute period, the quit reminder will be
displayed 15s before automatic quitting from sports mode.
New activities will cancel automatic quitting from Sports Mode. If there are
no new activities before the end of countdown, automatic quitting occurs.
Reminder of full-ram force quit
Click the touch key to confirm the full-ram force quit. When the Cactus SURGE memory is full, the user will be reminded to exit from sports mode.
Reminder of force quit for low battery
During sport activities, if power is too low, Sports Mode will pause and remind the user to force quit from Sports Mode. Click the touch key to accept the force quit
Reminder of inaccessible Sports Mode for low battery
The reminder will occur when the user tries to start Sports Mode when the
battery is too low. Click the touch key to exit the inaccessible Sports Mode
reminder.
Unintentional operations during activity
This reminder will appear on the screen, click the touch key to quit from the reminder waiting mode.
Camera Mode Control
To enter camera mode, allow VeryfitPro to access camera and photos in phone
settings, start the camera entry in the app and the device will get in camera
mode. You can then action photo taking by smartphone with any of the following
methods: Shake your SURGE , or lift
your wrist, or click the touch key.
To exit camera mode, press and hold the touch key on your SURGE , or exit through the app.
More Alerts / Reminders
Caller Alert/Reminder
- Click the touch key to remove the call reminder.
- Press and hold the touch key to hang up the call.
Note: the call alert function in the app needs to be on and pairing must be successful, and setting confirmed.
SMS Message Alert /Reminder
- SMS notification must be switched ON in the app (SNS alert>SMS) and pairing must be successful and setting confirmed.
- To read longer messages, click the touch key to see remainder of message.
Alarm Clock
Alarm alerts must be set in the app; multiple alarms can be set
Alarm Clock Types:
Sedentary Alert / Reminder
Sedentary alerts can be set in the app. Click the touch key to remove the vibration alert on your SURGE
Target Completion Alert/ Reminder
On achieving set goals, shake the SURGE to get the interface of the target completion reminder displayed. Click the touch key to quit from the reminder.
Low battery reminder
Please recharge
Device Error Notification
This interface will be displayed each time the device is opened, if an abnormality of functioning is detected
Status Code:
- abnormality of acceleration sensor
- abnormality of heart rate sensor
- abnormality of touch key IC
- abnormality of flash
Basic Specifications
- Model No.: ID115 Plus HR
- Battery Capacity: 65 mAh
- Working Voltage: 3.7 V
- Host weight: about 24g
- Sync: Bluetooth 4.0
- Working temperature: -2o·c- 4o·c Waterproof: IP67
- Working Time: 7days
- Product frequency band: 2402-2480MHz
- Maximum transmit power: -0.44dBm
Declaration
The device meets the EU ROHS criterion. Please refer to IEC 62321, EU ROHS Directive 2011/65/EU and revised directive.
Wearing and Maintenance
Our products are designed for daily use & wearing throughout the day. To keep your SURGE clean and for optimum functioning, we advise:
- Keep your skin clean
- Regularly clean the wristband of the SURGE especially after exposure to perspiration, or substances such as soap or detergent
- Do not wash the SURGE with household cleaning agents – use soapless detergent, rinse thoroughly & wipe dry with a soft towel
- For spots & stains, scrub with alcohol & then follow the above steps
FAQs
Failure to find the device when pairing
Make sure Bluetooth is ON in the smart phone & that software OS is Android 4.4
& above, or 1OS 8.0 & above. Make sure the distance between the phone and the
device is within 0.5 meter, and that the device is within normal Bluetooth
communication distance range (within 10 meters) after pairing is finished.
Make sure the device is fully charged & not showing low battery level.
Failure to connect with Bluetooth occasionally
Reboot mobile phone and re-start Bluetooth service
How to restore factory default settings
Make sure the device is connected with the smart phone, go to the
app>device>more>reboot device
WARRANTY
This product is warranted to be free from defects in materials and workmanship
for a period of 1 year from date of purchase. This warranty covers
manufacturing and mechanical defects but excludes band and lens damage
.www.cactuswatches.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>