CACTUS CAC-120 Tracker Plus Kids Smart Watch Strap Band User Manual
- June 6, 2024
- CACTUS
Table of Contents
CACTUS CAC-120 Tracker Plus Kids Smart Watch Strap Band
QUICK START GUIDE
Download VeryFitPro
The smart band needs to pair with a smart phone through the app.
Download Method 1:
Search the App store or the Google Play store and download the VeryFitPro app.
Download Method 2:
Please use the QR code scan tool to scan the following QR code and open the
link and download the app. In case there are problems opening the link, please
try to copy the link and open it with your browser.
Activating & Charging the Device
Connect the device to the charger and charge fully before initial use. Detatch the band from the host and connect the USB in DC port to charge. The screen will show a charging icon while the device is charging.
Pair the Device
Make sure that Bluetooth is ON and then open VeryFitPro app and go to Bind. When searching and pairing the device, please LONG PRESS the device screen to activate the device (light-up). The app will search the device automatically, select the device name shown and connect the device to the app.
OPERATING THE DEVICE
Once the device has connected to the app successfully, it will record and analyse your activities and sleep status automatically.
Touch Screen :
- TAP: Function Switch
- LONG-PRESS: Activate/Mode Switch
Normal Mode
- Note : If the Sedentary alert function is activated in the app, it will appear on the device screen after the measured inactivity time.
- Note : Alarm mode and Find phone mode will only display on the device screen after they are turned on in the app.
- Note : Display mode can be changed from landscape to vertical in the VeryFitPro app.
History Sports Mode
Under normal mode, hold the key (long press for 2 seconds) to enter the
history sports mode (the latest sports data retained from your last sports
mode recording – this does not apply to first time use). Then switch into
different display modes as follows, when pressing the key normally.
Sports Mode
In History Sports Mode, rapidly double click the Press key to activate the
Sports Mode. The timer begins counting and the various modes record the
present sports activity (heart rate, steps, distance, calories, and duration
of exercise).
At the conclusion of the exercise activity, hold the Press key for 3 seconds
and the device will revert to Normal Mode. To access the information from the
last sports mode activity, enter History Sports Mode again.
- Sports Heart Rate Mode
- Sports Pedometer Mode
- Sports Distance Mode
- Sports Calories Mode
FUNCTIONS
Activity Monitoring: tracks steps, distance and calorie consumption in the
app. Stores daily, weekly, monthly and annual data in the app. Sleep
Monitoring: automatically measures sleep quality (deep sleep and light sleep)
and duration. Stores daily, weekly and monthly data in the app. Heart Rate
Monitoring: continuous heart rate monitoring. Stores history in the app.
Vibration Notifications: receives alerts for alarms, incoming calls, texts,
movement reminders.
Anti-Lost Vibration Notification: when the paired phone is beyond the
Bluetooth range (5 meters) the smart band vibrates as a reminder. Remote
Camera Control: when the phone camera is on, the smart band device key can
operate the camera remotely.
troubleshooting
Can’t find the device when pairing the device?
- Please make sure that Bluetooth is ON and that smart phone has Android 4.4 & above or 10S 7.0 & above.
- Make sure that the distance between the phone and the device is no more than half a meter – the device must be within the normal Bluetooth communication distance range (within 10 meters).
- Please make sure the device does not have a low battery
Can’t connect the device with the app?
Please reboot Bluetooth and / or reboot the smart phone. .
- How to restore factory default settings Make sure the device is connected (bind) with the app, go to System Setting on the app, go to restart device – this will reboot the device
- How to update the device Make sure the device is connected with the app, go to Device Upgrade / Update and activate.
BASIC SPECIFICATIONS
- CPU: Nordic
- Sensor: kionix
- HR Sensor: Silicon labs
- Standby time: 5-10 days
- Host Weight: 18g
- Battery Type: Rechargeable Li Battery
- Battery Capacity: 45mAh
- Data Sync: Bluetooth 4.0
- Working Temperature: -20C – 40C
- I P67 waterproof
- Uses VeryfitPro algorithms and Bluetooth RF signal.
WARRANTY
This product is warranted to be free from defects in materials and workmanship for a period of 1 year from date of purchase. This warranty covers manufacturing and mechanical defects but excludes band, lens and water damage.