Kruger Matz KM0498 Live 9S Smartphone User Manual

June 6, 2024
Kruger Matz

Kruger Matz KM0498 Live 9S Smartphone User Manual
Kruger Matz KM0498 Live 9S Smartphone

Product description

Product description Product
description

  1. Receiver
  2. USB type-C port (charging)
  3. Proximity sensor / Light sensor
  4. Speaker
  5. Front camera
  6. Rear camera (48 Mpx)
  7. Rear camera (16 Mpx)
  8. Fingerprint scanner
  9. Overview button
  10. Home button
  11. Previous button
  12. Volume control button
  13. Power button
  14. Microphone
  15. Flash
  16. SIM/SD card tray
  17. Headphone jack

SAFETY ALERT AND CAUTIONS

Road safety comes first: Do not use a hand-held phone while driving. Use hands-free fittings when calls are unavoidable while driving. In some countries, dialing or receiving calls while driving is illegal!

Switch off in aircraft: Wireless devices can cause interference in aircraft. Please make sure that your mobile phone is powered off (or switched to flight mode) during flight.

Switch off before entering risky areas: Strictly observe the relevant laws, codes, and regulations on the use of mobile phones in risky areas. Turn off your mobile phone before entering a place susceptible to explosion, such as an oil station, oil tank, chemical plant or a place where a blasting process is under way.
Observe all special regulations: Follow any special regulations in force in any area such as hospitals and always switch off your phone whenever it is forbidden to use it or, when it may cause interference or danger. Properly use your mobile phone near medical apparatuses, such as pacemakers, hearing aids and some other electronic medical devices, as it may cause interference to such apparatuses.
Interference: The conversation quality of any mobile phone may be affected by radio interference. An antenna is built inside the mobile phone. Do not touch the antenna area during a conversation, as the
conversation quality will deteriorate.
Qualified service: Only qualified personnel may install or repair phone equipment. Installing or repairing the mobile phone on your own may bring great danger and violates the warranty rules.
Accessories and batteries: Use only approved accessories and batteries.
Use sensibly: Use only in a normal and proper manner, and only as indicated in this instruction manual.
Emergency calls: Ensure the phone is switched on and in service, enter the emergency number, e.g. 112, then press the Dial key. Give your location and state your situation briefly. Do not end the call until told to do so.
Note: Similarly to other mobile phones, this device may not support every function described in this manual due to network settings or radio broadcast operator. Some networks may not support 112 emergency calls too. Therefore, you should not rely only on mobile
phones in critical situations. In case of any doubts, it is advised to contact local operator.

  • Always disconnect the product from the power mains before cleaning. Clean the unit’s exterior periodically with a soft, slightly damp cloth. Do not use any chemical agents to clean this device.
  • Avoid using/storing it in the strong magnetic environment.
  • Protect this device from humidity, water and other liquid.
  • Do not disconnect the device suddenly when formatting or uploading/downloading – it can lead to program errors.
  • Do not handle the device with wet hands.
  • Do not use this device if it has been damaged.
  • Keep the volume at a reasonable level throughout entire time of using the speaker. To prevent damage to your hearing, do not raise the volume too high.
  • Producer does not claim liability for any data loss, damage caused by inappropriate use and handling or any mechanical damage.
  • Producer does not claim liability to any damages caused by inappropriate upgrade performed by the user.
  • Please read this operation instruction carefully before use, and keep it for future reference.
  • Before connecting the device to power supply socket, make sure the voltage indicated on the appliance corresponds to the voltage in the power supply socket.
  • This product is not a toy; keep it beyond children’s reach.

CLEANING AND MAINTENANCE

  • Please don’t leave the phone, the battery, and the charger in the bathroom and other high humidity places, and prevent them from rain.
  • Please clean the phone, the battery, and the charger using soft and dry cloth.

GETTING STARTED

STEP 1: To eject the card tray, insert card tray pin into card tray hole and push lightly until the card tray pops up.
GETTING STARTED
STEP 2: Retrieve the card tray and insert the nano SIM card, nano SIM card and microSD card as indicated (with the chip/pins facing upwards).
GETTING STARTED
STEP 3: Close the card tray.
GETTING STARTED

Please don’t wipe the phone using alcohol, thinner, or benzene and other chemical agents.

SIM CARD/MEMORY CARD INSTALLATION

  • Power off the mobile phone and disconnect it from charger before unmounting SIM cards.
  • Before removing memory card, make sure it has been disconnected first!
  • Exercise caution when operating SIM card/memory card, as friction or bending may damage the card.
  • Keep the mobile phone and its fittings such as the SIM cards/memory cards beyond children’s reach.
  • If the memory card cannot be read, please check whether it is has been inserted correctly.
  • Producer does not guarantee compability with every memory card.
  • Please note: Dual SIM in standby will shorten the standby time compared to single SIM.
  • Make sure the battery is fully charged if it has been out of use for a long period.

NOTE: The battery is not detachable. Do not attempt to disassemble the battery.

CHARGING

Charge the smartphone using the provided USB cable. Connect the cable to USB type-C port on the device. Other end of the cable plug into provided charger or compatible USB port.

  • Make sure the phone is fully charged before turning it on for the first time.
  • Use only original charging devices approved by the producer. Using other accessories may damage the device!

Overheating

While charging, the temperature of the device and the charger may get increased. This does not affect the device’s lifespan or performance and is in the device’s normal range of operation.

However, if there is an excessive increase in temperature or overheating, depending on the factor that caused it: device’s performance may be significantly reduced, charging process may be stopped, the device may turn off or display notification about switching off for cooling. Function available only in selected models. Important: if the device displays notification about overheat, turn it off and do not turn it back on until completely cooled down!

In case of overheat during charging:

  1. Disconnect the charger from the device.
  2. Close any running apps.
  3. Wait for the device to cool down, and then begin charging the device again.

If the part of the device where the USB port is placed overheats, check for damage to the connected USB cable. Replace the damaged USB cable with a new authorized cable.

The device may also overheat during operation when using several battery consuming applications or functions. In case of overheat during usage:

  1. Close any running apps.
  2. Disconnect any connectivity (Bluetooth, Wi-Fi, data transfer etc.).
  3. Lower the screen brightness settings.
  4. Wait for the device to cool down before attempting to use it again.

Safety precautions concerning operation environment In order to maintain battery’s longevity, and to avoid overheat, follow basic precautions including provisions listed below:

  1. Do not use / store the device in very hot or cold environments nor expose to direct sunlight (e.g. on a car’s dashboard when using as a navigation).
  2. Do not place the device on surfaces that may cause overheat e.g. electric heating mat.
  3. Do not place near sources of heat e.g. radiators, microwave ovens, hot kitchen appliances nor high pressure containers.
  4. DO NOT use damaged charger or battery!
  5. Use only authorized chargers, batteries and cables! Using unauthorized accessories may damage the device or battery. Connecting charger with inadequate parameters may result with damage to the device and poses risk to the user.

TURN ON

Turn on: Press and hold the power button until the screen goes on.
Turn off: Press and hold the power button for about 2 seconds, then choose appropriate (Power off).

LANGUAGE

Once the phone is ON you can personalize it to your needs. To change language go to Main Menu, open Settings, go to Language and input tab, enter Language and select appropriate.

FUNCTION KEYS

Power button: Press and hold Power key to open the power key menu, where you can turn off the phone (Power off) or Restart.
Volume button: Press the volume keys to change the ring volume (on the home screen) or the earpiece volume (during a call).
Overview button: Press the button to display recently used apps menu.
Home button: Press Home to return to the home screen. Press and hold the button to open Google Assistant function.
Back button: Goes back to previous screen or closes keyboard (if open).

LEARN MORE

For more information on this device visit: www.krugermatz.com. | Read owner’s manual carefully before using your smartphone. | Visit www.krugermatz.com website for more products and accessories. | In case of any doubts or questions reach out to our Frequently Asked Questions section.

Please note: illustrations and descriptions concerning operating system are for reference only, and may vary from actual software on your device!

IMPORTANT: The producer allows the possibility for minor variations in display brightness and color between individual devices. There may be visible light or dark spots on the display. Up to 5 defective pixels are acceptable to be present on the display of the device. Above mentioned cases concerning device’s display are not covered under warranty nor statutory warranty rights.

Google and Android are trademark of Google LLC.

Lechpol Electronics Sp. z o.o. Sp.k. hereby declares that smartphone KM0498 is consistent with directive 2014/53/UE. Full text of the EU Declaration of Conformity is available at following Internet address: www.lechpol.eu.

**
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

**

(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1, 08-400 Miętne.

http://www.krugermatz.com/

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Kruger Matz User Manuals

Related Manuals