innovative A1C Alarm Clock User Manual
- June 16, 2024
- INNOVATIVE
Table of Contents
innovative A1C Alarm Clock User Manual
DIMENSTION INSTRUCTION
‘HDU &XVWRPHU
7KDQN \RX IRU SXUFKDVLQJ GLJLWDO DODUP FORFN
)ROORZLQJ FRQWHQW LV WKH IXQFWLRQ EXWWRQ LQWURGXFWLRQ SOHDVH UHDG LW FDUHIXOO\
EHIRUH XVH
- 7.1 inch 3.5 inch Large Screen
- 3 Colors Night Light
- (White/Pale White / Yellow)
- 10W Wireless Charging Function
- 12/24 Hour Setting
- 3. Levels Screen Brightness Adjustment
- 4 Type Wake Up Sounds
Button Description:
Press the button to select 3 colors of night light (white, off-white, yellow). Press the “ +/- “ button to adjust the brightness (9 levels brightness)
- Press the button to turn on/off the alarm settings.
- When the icon lights up, press and hold the to the setting page. Press butt select the hours and minutes.
- After the number flashing press the “+/-” button to adjust the number.
Note: The alarm sound will last for 2 minutes and the icon will keep flashing.
Hour
Minute
SNOOZE:
-
Press the SNOOZE button when the alarm clock rings, to temporarily silence the alarm (it will sound again after 5 minutes). The alarm can be repeated up to 3 times, and it will no longer sound.
Note: The icon will still flash when temporarily muted. -
Press the SNOOZE button twice in a row to stop the alarm sounds when the alarm ring. Note: The icon will not flash.
“M”
1. Press and hold the “M ” button to set 12/24 hour (Press the “+/-“
button to adjust the number)
1. After the 12/24 hour setting is complete, press “M” button again to
set the hours and minutes. (Press the “+/-“ button to adjust the number)
24-hour system
12-hour system
Hour
Minute
Press button to select 4 tyepe wake up sounds.
Screen Brightness Adjustment:
Press SNOOZE button can adujust Screen Brightness. There are 3 levels of
brightness settings
10W Fast Charging:
QC3.0 adapter and 10W fast charging are available for cell phones with
wireless charging capability. Please be sure to use our original adapter.
On/off
The on/off button on the back controls the turn on/off screen.
Package Contents.
Alarm Clock 1
USB Cable1
QC3.0 Adapter
Instruction Manual *1
FCC Information
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
Interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits
for a Class 8 digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in particular installation. If this equipment does
cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
The FCC certification of this device refers to RF exposure testing performed
in typical operating conditions, where a person is no closer than 20
centimeters from the device surface at all times, except for non-repetitive
patterns with transient time intervals in the order of a second. Only in the
stated conditions, the device is shown to fully comply with the FCC RF
Exposure requirements of KDB 447498