BORMANN BWR5230 Hydraulic Press with Hand Pump User Manual

BORMANN BWR5230 Hydraulic Press with Hand Pump

Feature

1. Used for parts straightening, bending and pressing.
2. Multi-position bed for work height adjustment
3. With air pump can reduce labour and improve working efficiency

Operation

1. Place work piece on bed frame.
2. Locate and close release valve.
3. Pump handle until the ram nears work piece.
4. Apply load to work piece by pumping handle. Do not overload work piece.
5. Remove load from work piece by turning release valve. Stabilize work piece so it does not fall while pressure is released.
6. Remove work piece after ram is fully retracted.

Warning

1. This press is designed and intended for use by property trained and experienced personnel only, If you are not familiar with the proper and safe operation of a hydraulic press, do not use until proper training and knowledge has been obtained.
2. Do not operate this press beyond its rated capacity.
3.  Do NOT compress springs or other objects that could be ejected from the press. DO NOT compress objects that could shatter.
4. Check the press for loose or damaged parts before each operation.
5. Replace damaged parts and tighten all loose bolts before operating.
6. Some parts being pressed may have a tendency to pop out of the press or explode under pressure. Protect yourself accordingly.

Maintenance

1. Periodically, lightly oil all moving parts including the pump piston and hydraulic ram.
2. Check hydraulic connections and hoses before each use. Do not use If cut, damaged, leaking or otherwise damaged connections and/or hoses arc noted

Technical Data

• Piston stroke length: 175mm
• Working distance: 0-1030mm
• Weight: 89Kg
• Max pressing capacity: 20Τ

The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described /illustrated in the pages of the manual of the purchased product may also refer to other models of the manufacturer’s product range, with similar features, other than the product you have purchased. To ensure the safety and reliability of the tool and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death. The manufacturer and the importer shall not be liable for injuries and damages resulting from the use of non-conforming equipment.

WARRANTY

The workshop equipment has been manufactured according to strict standards set by our company, which are aligned with the respec ve european quality standards. The workshop equipment is provided with a warranty period of 12 months. The warranty is valid from the date of purchase of the product. Proof of the warranty right is the purchase document of the workshop equipment (retail receipt or invoice). Under no circumstances shall the company cover the relevant cost of spare parts and respec ve required working hours unless a copy of the purchase document is presented. In case the repair has to be done by our service department the cost of transporta on (to and from) is entirely borne by the sender (client). The said equipment must be sent for repair to the company or to an authorized workshop in the appropriate way and means of transport.

WARRANTY EXEMPTIONS AND RESTRICTIONS:

1. Spare parts that wear out naturally as a consequence of being used.
2. Workshop equipment damaged as a result of non-compliance with the instruc ons of the manufacturer.
3.  Workshop equipment poorly maintained or taken care of.
4. Use of improper spare parts or accessories.
5. Workshop equipmente given to third en es free of charge.
6. Damage as a result of mistaken assembly.
7. Damage as a result of poor quality of lubricant.
8. Damage as a result of not cleaning the equipment as required.
9. Equipment that has been modifi ed or disassembled by unauthorized personnel.
10. Equipment used for rent.

The warranty covers only the free of charge replacement of the component that presents a manufacturing defect or material failure. In case of lack of a specifi c spare part the company reserves the right to replace the equipment with another of the same kind. After all warranty procedures have been concluded, the warranty period of the equipment shall not be extend-ed or renewed. The spare parts or equipment that are replaced remain in the possession of our company. Requirements, other than those mentioned in this warranty form, regarding repairing a piece of equipment or damage thereof, do not apply. Greek law and  regulations apply to this warranty.

WARRANTY

This appliance is a quality product. It was designed in compliance with current technical standards and made carefully using normal, good quality materials. The warranty period is 12 months and commences on the date of purchase, which can be verified by the receipt, invoice or delivery note. During this warranty period all functional errors, which, despite the careful treatment de-scribed in our operating manual, are verifiably due to material flaws, will be rectified by our after-sales service staff. The warranty takes the form that de-fective parts will be repaired or replaced with perfect parts free of charge at our discretion. Replaced parts will become our property. Repair work or the replacement of individual parts will not extend the warranty period not will it result in a new warranty period being commenced for the appliance. No sepa-rate warranty period will commence for spare parts that may be ted. We cannot offer a warranty for damage and defects on appliances or their parts caused by the use of excessive force, improper treatment and servicing. This also applies for failures to comply with the operating manual and the installation or spare and accessory parts that are not included in our range of products. In the event of interference with of modifications to the appliance by unauthorized persons, the warranty will be rendered void. Damages that are attributable to improper handling, over loading, or natural wear and tear are excluded from the guar-antee. Damages caused by the manufacturer or by a material defect will be corrected at no charge by repair or by providing spare parts. The prerequisite is that the equipment is handed over assembled, and complete with the proof of sale and guarantee. For a guarantee claim, only use the original packaging. That way, we can guarantee quick and smooth guarantee processing. Please send us the appliances post-paid or request a Freeway sticker. Unfortunately we will be unable to accept appliances that are not postpaid. The warranty does not cover parts that are subject to natural wear and tear. If you wish to make a warranty claim, report faults or order spare parts or accessories, please contact the af-ter-sales center below: Subject to change without prior notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>