Fontastic Xora20Q USB Solar Power Bank User Manual
- June 6, 2024
- fontastic
Table of Contents
Fontastic Xora20Q USB Solar Power Bank
Thank you for choosing Fontastic® quality Products. Please read the manual carefully and note the safety advice.
Package contents
- Fontastic® power bank Xora20Q
- Micro-USB cable
- User manual
Overview
- Power button
- USB-A output
- USB Type-C™ input/output
- Micro USB input/output
- USB-A output
- Cover
- Power LED
- Wireless charging/fast charging LED
- Battery level indicator
- Wireless charging area
- Solar module
- Function LED solar module
- LED light
Start-up procedure
Charge power bank
Fontastic® power bank Xora20Q is equipped with an internal rechargeable
lithium polymer battery. Connect a charger to the Micro USB input (4) or the
USB Type-C™ port (3) of the power bank. The charging process begins. The LEDs
of the battery status indicator (9) flash during the charging process. Each of
the four blue LEDs represents 25% capacity (5000 mAh). When fully charged, all
four blue LEDs light up continuously. The charging process is finished. Now
disconnect the power bank from the charger.
Note: Charge the power bank fully before initial use. With a fast charger, the powerbank can be charged in a significantly shorter time. For maximum performance, we recommend a power delivery adapter with at least 25W.
Solar panel:
The powerbank is equipped with a solar panel (11), which charges the powerbank
as soon as the light conditions are sufficient. When the powerbank is
currently charging via the panel, this is indicated by the green LED (12)
lighting up.
Check battery level of the power bank
To check the battery status, press the power button (1). The LEDs (9) light up
for a few seconds and indicate the battery status of the power bank. Each of
the four blue LEDs represents 25% capacity (5000 mAh).
Charge devices using the power bank
Open the cover to access the ports of the powerbank. Connect the device to be
charged to a USB cable and connect it to one of the two USB-A or USB Type-C
ports of the power bank. The charging process will begin. Disconnect the cable
from the power bank after use.
NOTE: Devices can also be charged while the powerbank is charging!
Fast charge
For fast charging of compatible devices, use one of the USB-A outputs (2, 5)
or the USB Type-C™ (3) port. The intelligent IC detects the optimum charging
voltage and adjusts it accordingly. Devices to be charged must support
appropriate fast charging technologies.
Note: It is possible to use all outputs to charge 3 devices simultaneously. If
you use several outlets at the same time, the available current is divided.
The quick charge function is deactivated. Please refer to the user manual of
your device to find out how much power is required.
Note: If there is short circuit while charging a device, the power bank will
turn off. Plug an appropriate cable into the Micro-USB input (4) or Type-C
input (3) of the power bank, and connect the USB plug of the cable to a USB
charger or a computer. A short charge pulse is sufficient to reactivate the
power bank.
Charge devices wirelessly:
Wireless charging capable devices can be charged via the inductive charging
function. Before wireless charging, make sure that the smartphone you are
using supports wireless charging.
Press the power button (1), the battery status indicator LEDs and the
operation LED light up. Place the device to be charged with the back (charging
area) centered on the charging area of the power bank (10). The function LED
lights up and the charging process begins.
NOTE: Devices can also be charged wirelessly while the powerbank is charging!
NOTE: There must be no metallic objects between the powerbank and the smartphone.
LED light
The integrated LED light (13) is operated via the power key (1) and offers
various modes. Press and hold the power key (1) to switch on and off. Press
the key briefly again to access the various modes.
- LED flashes in SOS mode
- LED flashes quickly
- LED lights up continuously
Safety advice:
- Never open the device
- Do not immerse the device in water and protect it from moisture.
- Never connect the power output to the power input or vice versa.
- Never connect cables by force.
- Keep electrical appliances away from children.
- Unplug electronic devices when not in use for an extended period of time.
- Do not place cards with magnetic strips, magnetic recording media or metal objects on the wireless charging surface; charging does not take place and can lead to overheating!
- Wearers of pacemakers should maintain a sufficient distance between the device and the pacemaker. Consult the attending physician in case of doubt.
- This product may impair the function of medical equipment. Therefore, do not use it in clinics and medical facilities.
- Never use the product if it shows visible damage.
In case you need technical support, please contact our support-team by e-mail under service@fontastic.eu.
Technical Data:
- Battery: Lithium Polymer
- Capacity: 20.000mAh 74Wh
- Input Micro USB: 5.0/9.0/12.0V DC max. 2.0A 24.0W
- Input Type-C: 5.0/9.0/12.0V DC max. 3.0A 24.0W
- Solar panel charging Power: max. 2.0W
- Output Type-C: 3.8-12.0V DC max. 3.0A 22.0W
- Output USB-A 1: 5.0-12.0V DC max. 3.0A 18.0W
- Output USB-A 2: 3.3-12.0V DC max. 3.0A 18.0W
- Output Wireless Charger: 5.0/7.5/10.0/15.0W
- Total Power: 22.0W
- LED Light: 10 x 0,1W LED
- Protection Class: IPX4
- Charging LED: Blue
- Size: 170 x 87 x 25mm
- Weight: 526g
We hereby declare, that this device carries the CE mark in accordance with the regulations and standards. It conforms with the essential requirements of the RED Directive 2014/53/EU, as well as the RoHS Directive 2011/65/EU.
The full text of the EU declaration of conformity is available at the following internet ad-dress: www.d-parts.de/Konfo
Note on environmental protection:
After the implementation of the European Directive 2012/19/EU in the national
legal system, the following applies:
Electrical and electronic devices may not be disposed of with domestic waste.
Consumers are obliged by law to return electrical and electronic devices at
the end of their service lives to the public collecting points set up for this
purpose or point of sale. Details to this are defined by the national law of
the respective country. This symbol on the product, the instruction manual or
the package indicates that a product is subject to these regulations. By
recycling, reusing the materials or other forms of utilising old devices, you
are making an important contribution to protecting our environment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>