StarTech Stream Catcher Pro Software User Guide

: June 6, 2024
: StarTech

Table of Contents

Compliance Statements
- **Use of Trademarks, Registered Trademarks, and other Protected Names
Requirements
Operation
Limitation of Liability
Read User Manual Online (PDF format)
Download This Manual (PDF format)

StreamCatcher Pro

Software User Guide

For the latest information and specifications visit www.startech.com Manual Revision: 05/27/2021

Compliance Statements

**Use of Trademarks, Registered Trademarks, and other Protected Names

and Symbols**

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support i

Requirements

Supported Operating Systems:

Windows® 10 (32/64), 8/8.1 (32/64), 7 (32/64)

Minimum Requirements

GPU: Intel HD or NVIDIA GeForce GTX 600 series graphics (or better)
CPU: 4th generation Quad-Core Intel Core i5 CPU (i5-4xxx or comparable)
RAM: 8GB Dual-Channel

Recommended Hardware:

GPU: NVIDIA GeForce GTX 10xx (or better)
CPU: 6th generation Intel Core i7 CPU (i7-6xxx)/AMD Ryzen 7 (or better)
RAM: 8GB Dual-Channel

Operation

Interface

Video Preview Window: View the capture device’s video signal. Double-click for full-screen view. Double-click again for a minimized small window view featuring picture-inpicture view. Double-click a third time to return the preview window and to the main screen.
Volume Indicator: View volume levels.
Settings Panel: Select the corresponding buttons to view and/or edit the following options. Source/Capture/Record/Stream/System
Function Panels:
• Output: View video signal information.
• Screenshot: Select to capture a screenshot. The Screenshot button will appear Yellow when selected.
• Record: Select to start/stop recording audio/video. The Record button will appear Red when selected.
• Stream: Select to start/stop streaming to the desired streaming service. The Stream button will appear Blue when selected.
• Volume: Select or select and hold the Volume Slider to adjust the volume of the audio. Click the Speaker Icon to mute the audio.
Channel Preview: Video preview each capture device connected to the computer. Select the desired P review Window to view the corresponding capture device.

Settings Panel

Source Settings

Device: View the name of the connected capture device.
Video Input: Select the capture device’s video signal type.
Audio Input: Select the capture device’s audio signal type.
Mirror: Preview, record, or take screenshots with a mirrored view. Mirroring options include Vertical, Horizontal , or Vertical + Horizontal.
Brightness/Contrast/Hue/Saturation/Sharpness: Adjust image settings.

Screenshot Settings

File Directory: Select the Destination Folder for the screenshots.
File Name: Create/edit the File Name to be saved. The date and time are added to the file name by default.
Type: Select BMP or JPG for the screenshot file Type.
Number of Screenshots / Time Between Screenshots: Set the desired Number of Screenshots and T ime Between Screenshots (e.g. if the Number of Screenshots is set to 50 and the Time Between Screenshots (sec) is set to 20 seconds, the result will be 50 screenshots with each one taken 20 seconds apart. The sequence will stop once the desired Number of Screenshots has been reached. The maximum Number of Screenshots is 999 and the maximum Time Between Screenshots is 86400 seconds (24 hours).
Note: The default File Name must be used for this feature.
Select the Apply button to save and apply the setting changes.

Record Settings

Select the Destination Folder and File Name for the recorded video files.
Type: Select the desired file type for the video recording. The default video Type is MP4.
Encoder Type: Select the hardware that will be used to perform the video encoding. Selecting the Computer’s GPU is recommended.
Encoder Format: Displays the video encoding type. The Encoder Format defaults to H.264.
Mode: Select between either a Constant Bit Rate (CBR ) or V ariable Bit Rate (VBR).
Quality: Select the desired level (0 to 4) of video compression. Choose a lower number for slower network connections. The default Quality is set to 2.
Bit Rate (Kbps): Select the desired Bit Rate (Kbps).
GOP: Set the desired number of pictures (frames) between 2 intra-coded pictures (I frames). Video editing will be simplified if a lower GOP value is selected. However, a lower GOP value will result in a larger file size.
Select the Apply button to save and apply the setting changes.
Scheduled Record:
Select the “ ” button to schedule a recording. Multiple recordings can be scheduled.
Select the Recording Number (number highlighted in red in the above image) to display a drop-down menu.
Select a Start Time, Stop Time, and Day(s) of the Week (i.e. Sun, Mon, Tues, etc.).
Toggle the Switch (see the arrow in the above image) to apply the settings.
Scheduled recordings can be deleted by pressing the “ ” button on the selected Scheduled Recording.

Stream Settings

Stream Setting: Select the desired streaming protocol. The Stream Setting options are RTSP, RTMP , or HLS.
Various settings display based upon the selected Stream Setting protocol.
Encoder Type: Select the hardware that will be used to perform the video encoding. Selecting the Computer’s GPU is recommended.
Encoder Format: Displays the video encoding type. The Encoder Format defaults to H.264.
Mode: Select between either a Constant Bit Rate (CBR) or Variable Bit Rate (VBR).
Quality: Select the desired level (0 to 4) of video compression. Choose a lower number for slower network connections. The default Quality is set to 2.
Bit Rate (Kbps) / GOP: Select the desired B it Rate (Kbps) and Group of Pictures (GOP).
Select the Apply button to save and apply the setting changes.

System Settings

Resolution (Width/Height): Enter the desired values for the Resolution (Width) and Resolution (Height).The default resolution is 1920×1080.
Frame rate: Select the desired frame rate.
Select the Apply button to save and apply the setting changes.
Window on Top: Select the drop-down menu then select
Always on Top: StreamCatcher Pro appears on top of all other expanded windows.
Normal: StreamCatcher Pro will operate like any other program window and can be covered by other expanded windows.
Language: Defaults to English.
The installed StreamCatcher Pro Version and Hot Keys (keyboard shortcuts) can be seen below.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology parts. StarTech.com was founded in 1985 and has operations in the United States, Canada, the United Kingdom and Taiwan servicing a worldwide market.

Reviews
Share your experiences using StarTech.com products, including product applications and setup, what you love about the products, and areas for improvement.

StarTech.com Ltd.
45 Artisans Crescent
London, Ontario
N5V 5E9
Canada| StarTech.comLLP
4490 South
Hamilton Road
Groveport, Ohio
43125
U.S.A.| StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Road
Brackmills,
Northampton
NN4 7BW
United Kingdom| StarTech.com Ltd.
Siriusdreef 17-27
2132 WT
Hoofddorp
The Netherlands
---|---|---|---