WOWME GLADIATOR Smart Watch User Manual
- June 4, 2024
- WOWME
Table of Contents
WOWME GLADIATOR Smart Watch
Dear customer,
Thank you for purchasing our product. Please read the following instructions
carefully before first use and keep this user manual for future reference. Pay
particular attention to the safety instructions. If you have any questions or
comments about the device, please contact the customer line.
| www.alza.co.uk/kontakt
---|---
| +44 (0)203 514 4411
Importer
| Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
Downloading & Pairing
Long press the side button to turn on the watch. Next, download the app “Da Fit” from your phone’s app store. Alternatively, you can scan the following QR code to download the app.
Compatible systems: Android 4.4 or above, iOS 8.0 or above.
Then, turn on the Bluetooth on your phone, open the Da Fit app and tap “Add a device” to connect your phone to your device. Afterwards tun on the phone menu on your device. Next, go to “About” menu on your watch and check the last four digits of the MAC address. Then go to your phone’s Bluetooth settings and connect to a Bluetooth device that ends with those four digits. In the example below, the device’s MAC address ends with 5994.
Functions
Main Interface
Power on: Long press the side button for three seconds.
Power off: On the main interface, press the side button for three seconds, then click the checkmark to turn the watch off.
Switch main interface design: Long press the main interface until the interface shrinks a bit. You can change between various interfaces. The fourth dial can be manually replaced with user-defined picture or photo in the app.
Functions Menu
| Activity records
---|---
| Sleep monitor
Make sure you wear the watch when you sleep.
| Heart Rate monitor
If you need 24-hour monitor, please turn on the “Full-day heart rate” in the
Da Fit app.
| Exercise
Multiple sport modes, including walking, running, cycling, skipping,
badminton, baseball, football etc. All exercise data will be synced to the
mobile phone using Da Fit app.
| In the
Exercise function, you can select the sport mode you want. After you begin
your exercise, you will see these values: time spent, number of steps taken,
mileage, calories burnt and heart rate. By sliding the screen to the left, you
will have the option to pause or stop the exercise.
| Bluetooth call
| Blood pressure detection
Monitor by clicking the screen.
| Blood oxygenation detection
Monitor by clicking the screen.
| Weather
Slide up the screen to check weather information about this week.
| Notifications
Turn on notifications in the Da Fit app. On Android phone, navigate to Da Fit
app > Notifications > Accessibility.
| Music Player
Click the middle icon to pause or continue playing the track, tap the left
icon to play the last song or tap the right icon to play the next song.
| Shutter
Android: Turn on Da Fit app, enter “Shutter” function on the watch and
shake the watch or click to take a photo.
iOS: Turn on phone’s camera, enter “Shutter” function and shake the watch
or click to take a photo.
Pop-up Menu
To access the pop-up menu, slide the screen down from the main interface.
In the pop-up menu, you have several options:
- Theatre mode
- Brightness adjustment
- Vibration or mute mode
- Weather information
- Settings (stopwatch, alarm, countdown, brightness, wake the watch by shaking option on/off, theatre, reset, power off, about the device, app code)
Functions in the Da Fit app
Data Sync
- All measured data will be synced with the mobile phone using Da Fit app.
Main Interface Customization
- Here you can customize dial faces to your liking.
Notifications
- Here you can customize which apps have the permission to show push notifications on your watch (e.g., Facebook, Twitter etc.).
Alarm Clock
- You can set up alarm clock here.
Shutter
Others
- Find my watch
- After turning the function on, the watch will vibrate when the Bluetooth is connected.
- Time format
- Two options of 12-hour and 24-hour system.
- Do not disturb mode
- Sedentary reminder
- Valid period between 10:00 to 22:00.
- Full day heart rate monitor
- If the function is turned on, it will detect your heart rate throughout the day.
- Quick view screen
- Wake the screen up.
- Reminder to drink water
- Weather
- Choose the city you want or let the watch detect your location automatically.
- Physiological cycle reminder
Common Problems
What should I do if I have problems with connection or notifications?
You should try resetting connection of your device with the following
instructions:
- Unbind your device in the Da Fit app and for iOS devices cancel connection in the Bluetooth settings as well.
- Uninstall the Da Fit app from your phone.
- Reset your watch in the device settings.
- Install Da Fit app again on your phone.
- Bind your watch again in the Da Fit app
Why don’t I receive notifications from some apps?
There can be two issues:
- Notifications are not allowed for specific app. Go to device settings in the Da Fit app on your phone and turn on notifications for selected app or turn on notifications for “others”. On iOS devices you might need to restart your phone to ensure proper function.
- On Android device, your phone can automatically close Da Fit app when it is running in the background. When Da Fit app is closed, it cannot communicate with your watch. Please change settings of battery saving in your phone to allow the app to run on the background.
Why can’t I find the device?
Since the wristband is not found in the Bluetooth broadcast, make sure the
wristband is in power and activated and is not connected to any other phones.
Then, put the wristband close to the phone. If it is still not working,
restart the mobile phone.
Why should the wristband be worn more tightly when measuring heart rate?
The wristband uses light reflection principle, penetrates the skin through the
light source and collects the signal reflected to the sensor to calculate your
heart rate. If you don’t wear it tightly, there will be ambient light reaching
into the sensor, which will affect measurement accuracy.
Is the wristband waterproof?
The device supports IP67 certification standard. It means that you can immerse
device for 30 minutes into one-meter depth. Practically, it means that this
device shall withstand light rain or washing hands. Device with this
certification is not waterproof in streams of water, against high pressure or
high-temperature water.
Does the Bluetooth connection need to be opened all the time? Is there any
data after disconnection?
Before the data is synchronized, the data is kept on the wristband host (seven
days of data can be retained). When the Bluetooth connection of the wristband
and the mobile phone is successful, the wristband data will be automatically
uploaded to the mobile phone. Please synchronize data to the mobile phone on a
regular basis.
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:
- Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
- Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
- Natural wear and aging of consumables or components during use (such as batteries, etc.).
- Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
- If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.
EU Declaration of Conformity
Identification data of the manufacturer’s / importer’s authorized
representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440
Subject of the declaration:
Title: Smart watch
Model / Type: WowME Gladiator
The above product has been tested in accordance with the standard(s) used
to demonstrate compliance with the essential requirements laid down in the
Directive(s):
Directive No. 2014/53/EU
Directive No. 2011/65/EU as amended 2015/863/EU
Prague, 24.1.2022
WEEE
This product must not be disposed of as normal household waste in accordance
with the EU Directive on Waste Electrical and Electronic Equipment (WEEE –
2012/19 / EU).
Instead, it shall be returned to the place of purchase or handed over to a
public collection point for the recyclable waste. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences
for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. Contact your local authority or
the nearest collection point for further details. Improper disposal of this
type of waste may result in fines in accordance with national regulations.
References
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza.sk – rýchly a pohodlný nákup odkiaľkoľvek | alza.sk
- Alza | Alza.co.uk
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza.cz
- alza.de
- alza.hu
- alza.sk