CRYSTORAMA 131-VZ-CEILING One Light Ceiling Mount Instruction Manual

CRYSTORAMA 131-VZ-CEILING One Light Ceiling Mount

Product Information

The Loop CRYST RAMA Lighting fixture is a damp-rated ceiling light that comes with a metal ring, bottom basket, mounting hardware, canopy, finial, loop, chain, and socket. It requires a medium base bulb of 40 watts (recommended) or a maximum of 60 watts. LED bulbs are recommended for extended use. The fixture has alternating glass drops A and B that can be hung on the metal ring and bottom basket. It also has glass drop C that can be hung at the bottom of the bottom basket. The product comes with assembly instructions and a warning to turn off the power before installation. All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes. The product also comes with a warning that it contains lead which can cause cancer and/or birth defects or reproductive harm.

Product Usage Instructions

For Hanging:

1. Determine the preferred hanging height and adjust to the required chain length.
2. Open one link of the chain, connect it to the fixture loop, and close the link. Open the other link of the chain, connect it to the loop of the canopy, and close the link.
3. Thread the mounting screws into the matching holes of the mounting bar and tighten with the small hex nut.
4. Secure the mounting bar to the outlet box with the outlet box screws.
5. Raise the canopy, allowing the mounting screws to protrude through the holes in the canopy, and secure with the ball nut.
6. Hang crystals to the metal ring and bottom basket, alternating between glass drop A and B.
7. Hang glass drop C at the bottom of the bottom basket.
8. Install the bulb (not included) into the socket.

For Ceiling:

1. Loosen the hex nut of the canopy and disassemble the canopy.
2. Remove the loop on the top of the fixture.
3. Slip the canopy, the metal washer, and lock washer over the nipple, then secure with the hex nut.
4. Thread the mounting screws into the matching holes of the mounting bar and tighten with the small hex nut.
5. Secure the mounting bar to the outlet box with the outlet box screws.
6. Raise the canopy, allowing the mounting screws to protrude through the holes in the canopy, and secure with the ball nut.
7. Install the bulb (not included) into the socket.
8. Hang crystals to the metal ring and bottom basket, alternating between glass drop A and B.
9. Hang glass drop C at the bottom of the bottom basket.

Note: All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.

WARNING

• Electrical Danger
• Turn Power off

All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes

You will need

• You will need 1-Medium Base Bulb
• 40 Watts Recommended 60 Watts Max.
• USE LED BULBS FOR EXTENDED USE
• This fixture is Damp rated

How to install

For hanging

Part Numbers

• A. (1)-Mounting hardware
• F. (1)-Metal ring
• B. (1)-Canopy W5-7/8’’xH1-1/8’’ #XRF130VZCAN6IN
• C. (2)-Finial #XRF130VZFIN
• D. (2)-Loop #XRF130VZLOOP
• E. (1)-Chain -L72’’, 4mm thick #XRF130VZCHA4MM
• G. (1)-Bottom basket #XRF131VZBT
• H. (1)-Socket

1. Determine the preferred hanging height and adjust to the chain required.
2. Open one link of chain connect it to fixture loop and close the link. Open the other one link of chain connect it to loop of canopy and close the link.
3. Thread the mounting screws into the matching holes of the mounting bar, and tighten with the small hex nut.
4. Secure the mounting bar to the outlet box with the outlet box screws.
5. Raise canopy allowing the mounting screws to protrude through the holes in the canopy, and secure with the ball nut.
6. Hang crystals to the metal ring and bottom basket, alternating between glass drop A and B.
7. Hang glass drop C at the bottom of the bottom basket.
8. Install the bulb (not included) into the socket.

For ceiling

Hang crystals on the rings alternating between crystals A and B

Dimension

• A= 30mmx29sets
• B= 76mmx29sets
• C= (30mm Ball with chain)x1set

WARNING: This product can expose you to Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>