Thermee Micro Flannel B08F3PCMZK King Size Heated Electric Blanket User Guide

June 15, 2024
Thermee Micro Flannel

Thermee Micro Flannel B08F3PCMZK King Size Heated Electric Blanket

Thermee-Micro-Flannel-B08F3PCMZK-King-Size-Heated-Electric-Blanket-
PRODUCT

Product Information

Specifications

  • Brand: Newair
  • Model: [model number]
  • Power Source: [power source]
  • Voltage: [voltage]
  • Temperature Range: [temperature range]
  • Humidity Range: [humidity range]

Product Usage Instructions

Troubleshooting

If your cigar humidor appears to be malfunctioning, please follow these steps:

  1. Unplug the humidor.
  2. Contact our customer service team for assistance.
  3. For any intervention on the cold circuit, such as inspection of the circuit sealing system, it should be performed by a refrigeration technician.
  4. For any intervention on the electrical circuit, it should be performed by a qualified electrician.

WARNING
Any intervention performed by a non-authorized technician will void the warranty.

In the event of a power failure:

  • All previous temperature settings will be automatically reinstated when power is restored.
  • To avoid sudden temperature changes during a power outage, avoid opening the door.
  • If the power failure is expected to last for a longer period, take steps to protect your cigars.

Common Usage Problems
If you encounter any of the following common usage problems, try the suggested solutions:

Problem Possible Causes Solution
The humidor will not operate. – The unit may be plugged in using a different

voltage.
– The circuit breaker may be tripped or there is a blown fuse.| – Check if the unit is using the correct voltage.
– Reset the circuit breaker or check for a broken fuse.
The humidor is not cold enough.| – The external environment may require a higher temperature
setting.| – Lower the temperature of the humidor.
The door is not closed completely.| – Make sure the door is closed securely.| – Check and replace the seal on the door if necessary.
– Ensure there is at least 5 inches clearance between the back of
the unit and any adjacent walls.
The light does not work.| – There may be a problem with the display board.| – Contact the Newair customer support department for
assistance.
The humidor vibrates while operating.| – The unit is not sitting on a level floor, or the unit’s feet
are not correctly installed.| – Ensure the unit is placed on a level floor.
– Check and adjust the unit’s feet to be in the proper position and
tightened securely.
Problem| Possible Causes| Solution
---|---|---
The humidor produces a lot of noise.| The unit is not leveled. See above.
Check the fan.                          Check the fan to make sure there is no debris or obstruction. If not, contact the Newair Customer Support Department.
Left window shows HH “High Temperature”| Ambient temperature is Avoid using at ambient too high. temperature above 108

degrees Fahrenheit.

Leakage in refrigeration          Contact a qualified system or failure of technician for repairing. indoor fan.
Left window shows LL “Low Temperature”| Ambient temperature is Avoid using at ambient too low. temperature below 32

degrees Fahrenheit.

Refrigeration system               Contact a qualified failure. technician for repairing.
Right window shows HH “High Humidity”| Appliance is in a high If there is water in the humidity environment            water box it must be and shows higher than           drained at this time. set humidity by 15% for

more than 48 hrs.

Refrigeration system               Contact a qualified failure. technician for repairing.
Right window shows LL “Low Humidity”| Humidity is lower than Add water to the water set humidity by 15% for         box.

more than 48 hrs. There

might be no water in the water box.

Refrigeration system               Contact a qualified failure. technician for repairing.

Additional Troubleshooting
If you encounter any of the following problems, please follow these steps:

  • The humidor produces a lot of noise:
    • Check if the unit is levelled.
    • Check the fan for any debris or obstruction. If needed, contact the Newair Customer Support Department for assistance.
  • The left window shows “HH” (High Temperature) or “LL” (Low Temperature):
    • If the ambient temperature is too high (above 108 degrees Fahrenheit), avoid using the humidor.
    • If there is a refrigeration system failure, contact a qualified technician for repairs.
  • The right window shows “HH” (High Humidity) or “LL” (Low Humidity):
    • If the humidor is in a high-humidity environment and shows higher than set humidity by 15% for more than 48 hours, there might be a refrigeration system failure.
    • Contact a qualified technician for repairs.
    • If humidity is lower than the set humidity by 15% for more than 48 hours, check if there is water in the water box. If needed, contact the Newair Customer Support Department for assistance.

OPERATION MALFUNCTIONS
If your cigar humidor appears to be malfunctioning, unplug it and contact our customer service team. Any intervention on the cold circuit should be performed by a refrigeration technician who should inspect the circuit sealing system. Similarly, any intervention on the electrical circuit should be performed by a qualified electrician.
WARNING: Any intervention performed by a non-authorized technician will lead to the warranty being void.

POWER FAILURES
In the event of a power interruption, all previous temperature settings are automatically reinstated, and it will revert to a preset temperature setting. Most power failures are corrected within a short period. An hour or two of lost power will not affect the cigar humidor’s temperatures. To avoid sudden changes in temperature while the power is off, you should avoid opening the door. For longer periods of power failure, take steps to protect your cigars.

COMMON USAGE PROBLEMS
You can resolve most common usage problems easily by reviewing and following the troubleshooting information below.

FAQ

Q: What should I do if my humidor does not operate?
A: First, check if you are using the correct voltage. If the problem persists, reset the circuit breaker or check for a blown fuse. If none of these solutions work, please contact our customer service team for further assistance.

Q: How do I adjust the temperature of the humidor?
A: To adjust the temperature, use the temperature control buttons located on the front panel of the humidor. Refer to the user manual for detailed instructions.

Q: Can I replace the door seal myself?
A: Yes, the door seal can be replaced. You can acquire replacements from our Newair customer support department. Please refer to the user manual for instructions on how to replace the door seal.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals