Fontastic 260315 ICONA Multifunction Lamp User Manual

Fontastic 260315 ICONA Multifunction Lamp

Package contents:

•  Multifunctional table lamp ICONA
• Power supply
• User manual

Overview

1.  USB Type-C input
2.  Touch control panel
3.  Charging status indicator
4.  Wireless charging area
5.  BT connection indicator
6.  Volume – / previous track
7.  Play / pause
8.  Volume+/ next track
9.  Digital clock
10.  Sleep mode
11.  TWS indicator
12.  Light control area

NOTE: By touching the touch control panel, the operating functions appear, the control panel is activated.
NOTE : No liability is accepted for any damage in the event of incorrect operation.Please read these operating instructions carefully.

Getting started

Plug the supplied power adapter into a power outlet, then plug the USB Type-C plug of the adapter into the USB Type-C input of the ICONA. When the light is on, the device is successfully powered on. After connecting to the power grid, ICONA will automatically enter pairing mode . The indicator on the left underneath the clock flashes.

Bluetooth® connection

The speaker must be connected to a Bluetoolh® device before it can be used.

1. The speaker enters pairing mode when it is connected to the power source but not paired with a device.While the speaker is in pairing mode, the indicator below the digital clock will blink.
2.  Search for Bluetooth® audio devices using your Bluetooth® device from which audio is to be played.
3.  The searching device indicates that it has found the ,, ICONA” speaker. Confirm the connection. A successful connection is confirmed by an acoustic signal. The indicator lights up permanently. Once ICONA is connected to your smartphone. Please allow the ,, Device notification” on your smartphone, thus the time setting of the digital clock will be synchronized with the time of your phone.

TWS function (connecting 2 ICONA)

TWS function (connecting 2 ICONA)The TWS function allows you to connect two ICONA together. The first ICONA is the connected main speaker to the Bluetooth® device. The music is controlled via the main speaker. The second is connected to the main speaker. The sound will be played from both ICONA.

1.  Make sure that both ICONA are connected to the power source and not paired with another device or smartphone.
2.  Touch the,, +” and,,-” sensors on the control panel of the first ICONA simultaneously for a longer time, the TWS indicator below Clock flashes and the TWS pairing mode is activated. Now touch the,, +” and,,-” of the second ICONA. Now both ICONA pair with each other and the TWS indicator lights up continuously, a confirmation signal sounds.
3. If you want to disconnect the TWS pairing, please touch the,,-” and,, +” sensors on the touch control panel of one of the paired ICONA simultaneously for a long lime.

NOTE : The touch control panel is activated by briefly touching it.

Music playback

Music playback via Bluetooth®
A Bluetooth® source must be paired with ICONA to output music!Start or stop the music playback by briefly touching the start/stop sensor.
Note: The device must support A2DP and AVRCP profile to play and control music over ICONA.

Music control

• To play or stop music, briefly touch the play/pause sensor.
• To skip to the next track, touch the volume + sensor for about 3 seconds.
• To skip to the previous track, touch the volume – sensor for about 3 seconds. Volume adjustment

Volume adjustment

Increase volume : Tap the volume+ sensor with a short interruption until the desired volume is reached.

Decrease volume: Tap the volume – sensor with a short interruption until the desired volume is reached.

Light control

1. Turn on/off-Touch any point on the light control area (12) for 4 seconds.
2. Brightness – Swipe left/right on the light control area to adjust the brightness.
3. Color temperature – Tap on the light control area to switch between 2700K (warm white)/ 6000K (daylight) color temperature.

Inductive charging

Wireless charging capable devices can be charged via the inductive charging function of the ICONA.ICONA must be connected to the power grid. If this is the case, place the smartphone on the mark in the center of the wireless charging area. The charging process starts. The LED lights up blue continuously during charging and turns off when the smartphone is fully charged. If the LED flashes, there is a malfunction. Please adjust the smartphone on the charging area. Remove objects between the charging area and the smartphone. Devices can be charged wirelessly with up to 1 O Watts.
NOTE: There must be no metal objects between the charging area and the smartphone.

Sleep mode

Tap the sleep mode sensor to turn sleep mode on or off. The light of the ICONA lamp is dimmed when this function is activated. The light and speaker will turn off automatically after 30 minutes

Digital clock

The digital clock will be set to 00:00 while the power is being supplied for the first time. Once the light is connected to your smartphone, please allow the .,Device Notification” on your smartphone. The time setting of the digital clockwill be synchronized with the time on your phone. The clock display will always stay on even if ICONA is not connected to your smartphone.In case of power interruption, the time will be reset, after connecting with smartphone, the time will be automatically taken over by the phone.

Technical Specification:

• BT Version: 5.0
  

• Profile: AVRCP/A2DP
  

• Frequency range: 2400-2483 MHz
  

• Input voltage: 9V DC, 3A
  

• Charging power wireless: 5W/7.5W/10W
  

• Loudspeaker: 2 x 5 Watts, 4 Ohm
  

• Colour temperature: 2700K/6000K

Safety information:

•  Do not open the charger
•  Do not expose the device to water and protect it against humidity
•  Do not use brute force when connecting the adapter.
•  Disconnect electronic devices from the power when not using them for longer time.
•  Do not place cards with magnetic strips, magnetic recording media or metal objects onto the charging area or between this and your smartphone; no charging will take place and can lead to overheating!
•  Remove your smartphone’s case (if present) before placing it on the charging station.
•  Individuals who wear a pacemaker should maintain a sufficient distance between the device and their pacemaker. If in doubt, consult your treating physician.
•  This product may interfere with the proper functioning of medical equipment. Consequently, do not use device in hospitals and other medical facilities.
• Never use the product if signs of damage are visible.

No liability is accepted for any damage which may occur through the improper operation.If you require technical support, please contact our support team via email at service@fontastic.eu.

Registration and Safety

Certification/General Information
We hereby declare that this device carries the CE mark in accordance with the regulations and standards.It conforms with the fundamental requirements of the RED 2014/53/EU, as well as the RoHS directive
2011/65/EU.The full text of the EU declaration of conformity is available at the following internet address: www.d-parts.de/Konfo
Note on environmental protection:
After the implementation of the European Directive 2012/19/EU in the national legal system, the following A applies: Electrical and electronic devices may not be disposed of with domestic waste. Consumers are- obliged by law to return electrical and electronic devices at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details of this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilizing old devices, you are making an important contribution to protecting our environment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>