CREATE Portable Air Conditioner 4 in 1 with WiFi User Manual

CREATE Portable Air Conditioner 4 in 1 with WiFi

OverView

Thank you for choosing our air conditioner. Before using the appliance, and to ensure the best use, carefully read these instructions. The safety precautions enclosed herein reduce the risk of death, Injury and electrical shock when correctly adhered to. Keep the manual in a safe place for future reference, along with the completed warranty card, purchase receipt and package. If applicable, pass these instructions on to the next owner of the appliance. Always follow basic safety precautions and accident-prevention measures when using an electrical appli­ance. We assume no liability for customer failing to comply with these requirements.

SECURITY INSTRUCTIONS

When using any electrical appliance, basic safety precautions should always be ob­served.

• Do not use means to accelerate the defrosting process or to clean, other than those recommended by the manufacturer.
• The appliance shall be stored in a room without continuously operating Ignition sources (for example: open flames, an operating gas appliance or an operating electric heater.)
• Do not pierce or burn.
• Be aware that refrigerants may not contain an odour.
• Appliance shall be Installed, operated and stored In a room with a floor area larger than 14m2
• Keep any required ventilation openings clear of obstruction;
• Servicing shall be performed only as recommended by the manufacturer.
• The appliance shall be stored in a well-ventilated area where the room size corresponds to the room area as specified for operation.
• Any person who is involved with working on or breaking into a refrigerant circuit should hold a current valid certificate from an industry-accredited assessment authority, which authorizes their competence to handle refrigerants safely in accordance with an industry recognized assessment specification.
• Servicing shall only be performed as recommended by the equipment manufacturer. Maintenance and repair requiring the assistance of other skilled personnel shall be carried out under the supervision of the person competent in the use of flammable refrigerants.
• All working procedure that affects safety means shall only be carried by competent persons.
• The air conditioning is only suitable for indoor use, and is not suitable for other applications.
• Follow local grid interconnection rules while installing the air conditioning and ensure that It ls properly grounded. If you have any question on electrical Installation, follow the instructions of the manufacturer, and if necessary, ask a professional electrician to install it.
• Place the appliance in a flat and dry place and keep a distance of above 50cm between the unit and the surrounding objects or walls.
• After the air conditioning Is installed, ensure that the power plug is intact and firmly plugged into the mains power outlet, and place mains power cable orderly to prevent someone from being tripped or pulling out the plug.
• Do not put any object into the air inlet and outlet of the air conditioning. Keep the air inlet and outlet free from obstructions.
• When drainage pipes are installed, ensure that the drainage pipes are properly con­nected, and are not distorted or bended.
• While adjusting the upper and lower wind-guide strips of the air outlet, pluck it with hands gently to avoid damaging wind-guide strips.
• When moving the appliance, make sure that it is in an upright position.
• The unit should stay away from gasoline, flammable gas, stoves and other heat sources.
• Don’t disassemble, overhaul and modify the appliance arbitrarily, otherwise it will cause a unit malfunction or even bring harm to persons and properties. To avoid danger, if a failure occurs, ask the manufacturer or professionals to repair it.
• Do not install and use the appliance in the bathroom or other humid environments.
• Do not pull the plug to turn off the appliance.
• Do not place cups or other objects on the body to prevent water or other liquids from spilling into the air conditioning.
• Do not use insecticide sprays or other flammable substances near the appliance.
• Do not wipe or wash the appliance with chemical solvents such as gasoline and al­cohol. When you need to clean the appliance, you must disconnect the mains power supply, and clean it with a half-wet soft cloth. If the appliance is really dirty, scrub with a mild detergent.
• The appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the haz­ards involved. Children shall not play with the appliance. Cleaning and maintenance shall not be made by children without supervision. If the mains power cable is dam­aged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. The appliance shall be installed in accordance with national wiring regulations.
• Do not operate the appliance in a wet room such as a bathroom or laundry room.

PARTS LIST

1. Control panel
2. Top cover
3. Swing leaf
4.  Front housing
5. Rear housing
6. Caster wheels
7. EVA filter housing
8. Handle
9. Air vent
10. Continuous drainage hole
11. CON filter housing
12. Drainage hole
13. Mains power cable
14. Power plug
15. Adjustable slider bar
16. Slide bar connector
17. Exhaust pipe
18. Exhaust pipe joint
19. Remote control

CONTROL PANEL

1. Swing
2. Timer
3. Fan Speed
4. Up
5. Display window
6. Down
7. Mode selection
8. Sleep mode
9. Power
10. Water tank fuU light indicator
11. WiFi

• Swing Key: The Swing function only works after turning on the unit, you can turn the swing on or off.
• Timer Key: When the unit is on, press the key to close timing; When the unit is off, press the key to start timing. Press the key, when the timing symbol flashes, press up and down key to select the required timing value. Timing values can be set in 1 to 24 hours and the timing value Is adjusted up or down by one hour.
• Fan speed Key: In cooling, heating and fan mode, press this key to select high, mid­dle, low speed. This function is not available in Sleep mode and Dehumidifying mode.
• Up/ Down Key: To set temperature and time. (Temperature can’t be set while In dehumidification and fan modes.)
• Mode Key: When the unit is on, press this key to switch between cooling. dry. fan or heating mode.
• Sleep Mode: When the power ls on and ln cooling or heating mode, press Sleep button to start the sleep mode. Under Sleep mode, the fan speed is set to Low and not adjustable. The Sleep mode can be cancelled by pressing the button again.
• Power Key: Press this key to turn on and off the unit.
• Memory function: The appliance maintains its settings during a power failure.
• WIFI: Long press this button for 3 seconds to connect the device to the WiFi network.

REMOTE CONTROL

1. Screen
2. Power
3. Timer
4. Sleep mode
5. Up/ Down
6. Modes
7. Fan speeds
8. Temperature unit

APP CONNECTION

• CREATE HOME application is available for Android and iOS (look for the app on Goog­le Play or App Store or scan the QR code below). Depending on the provider, there may be costs involved in downloading the app.
• This appliance allows you to operate the appliance via your home network. A pre­requisite is a permanent WiFi (2.4 Gh) connection to your router and the free app CREATE HOME.
• We recommend disconnecting the appliance from the power supply when you are away from home to prevent unintentional switching on while you are away.

SYSTEM REQUIREMENTS

• iOs 8.0 or higher.
• Android 4.1 or higher.

1. Install the CREATE HOME app and create a user account.
2. Activate the WiFi function in the settings of your appliance.
3. The appliance must be in Standby mode.
4. Place the appliance at a distance of about 6 meters to your router.
5. Press and hold the button® on the device for about 5 seconds. It will flash rapidly.
6. Launch the app and select ” + “.
7. Select the “air conditioner” menu and follow the instructions on the display.
8. Once the appliance has been successfully connected, the button ® lights up. Now you can operate the appliance using the app.

PROTECTION FUNCTIONS

• FROST PROTECTION FUNCTION In cooling, dehumidifying or economic power-saving mode, if the temperature of the exhaust pipe is too low, the air conditioner will automatically enter protection status; if the temperature of the exhaust pipe rises to a certain temperature, it can automat­ically revert to normal operation.
• OVERFLOW PROTECTION FUNCTION When the water in the water tank exceeds the warning level, the machine will automati­cally sound an alarm, and the full indicator light will flash. At this point, you need to move the drainage pipe connecting the device or the water outlet to a sewer or other drainage area to empty the water. After the water is emptied, the device will automat­ically return to its original state.
• AUTOMATIC DEFROSTING The machine has an automatic defrosting function. Defrosting can be achieved through a four-way valve reversing system.
• COMPRESSOR PROTECTION FUNCTION To increase the service life of the compressor, it has a 3-minute delay booting protec­tion function after the compressor is turned off.

INSTALLATION AND ADJUSTMENT

Warning: Before using this portable air conditioner, keep it upright for at least two hours. The air conditioner can be easily moved in the room. In the moving process, ensure that the air conditioner is in the upright position and the air conditioner should be placed on a flat surface. Do not install and use the air conditioner in the bathroom or other humid environments.

INSTALLATION OF THE HEAT PIPE

1. Take out the outer connector assembly and the exhaust pipe assembly, and remove the plastic bags;
2. insert the heat pipe assembly (the end of the exhaust joint) into the back panel vent slot (push to the left) and complete the assembly.

INSTALLATION OF THE WINDOW SEALING PLATE

1. Half-open the window and mount the window sealing plate assembly to the window. Components can be placed in horizontal and vertical directions.
2. Pull the components of the window sealing plate assembly open, adjust their open­ing distance to bring both ends of the assembly into contact with the window frame, and fix the components of the assembly.

Notes: The flat end of the exhaust pipe joints must be snapped into place. The pipe cannot be distorted nor have substantial turning (greater than 45°). Keep the ventila­tion of the exhaust pipe not blocked.

INSTALLATION OF THE APPLIANCE

1. Move the air conditioner with installed heat pipe and fittings in front of the window, and the distance between the body and walls or other objects shall be of at least 50 cm.
2.  Elongate the exhaust pipe and snap the flat end of the exhaust pipe joints into the hole of the window sealing plate assembly. Important Notice: The length of the exhaust hose shall be between 280 and 1,500mm, and this length is based on the specifications of the air conditioner. Do not use exten­sion tubes or replace it with other different hoses, or this may cause a malfunction. The exhaust host must be not blocked; otherwise, it may cause overheating.

DRAINAGE INSTRUCTIONS

MANUAL DRAINAGE

• When the air conditioner stops after the water tank is full, turn off the machine pow-er and unplug the power plug.
  Notes: Please move the appliance carefully, so as not to spill the water in the water tank at the bottom of the body.

• Place the water container below the side water outlet behind the body.

• Unscrew the drainage cover and unplug the water plug, the water will automatically flow into the water container.
  Notes: Keep the drainage cover and the water plug properly.

• During drainage, the body can be tilted slightly backward.

• If the water tank cannot hold all the wa­ter before it is full, stuff the water outlet with the water plug as soon as possible to prevent water from flowing to the floor or the carpet.

• When the water is discharged, stuff the water plug, and tighten the drainage cover.

Special caution for heating mode: When heating mode works, if you don’t want to empty the water tank under this mode, please connect a water drainage pipe to remove the water out continu­ously:

1. Remove the rubber plug and keep It for future use.
2. Connect one end of the drain pipe (14mm} into the water outlet and put the other end into a water container.
   Note: The water container must be at or lower the outlet level.

CONTINUOUS DRAINAGE (OPTIONAL, ONLY APPLICABLE TO DEHUMIDIFY­ ING MODE)

• Unscrew the drainage cover, and unplug the water plug.
• Set the drainage pipe into the water outlet.
• Connect the drainage pipe to the bucket.

MAINTENANCE

Before performing tasks of cleaning and maintenance, turn off the machine and un­plug it.

1. Clean the surface:
   • Clean the surface of the machine with a wet soft cloth. Don’t use chemicals, such as benzene, alcohol, gasoline, etc; oth­erwise, the surface of the air conditioner will be damaged or even the whole ma­chine will be damaged.
2. Clean the filter screen:
   • If the filter screen is clogged with dust, and the effectiveness of the air condi­tioner is reduced, be sure to clean the filter screen once every two weeks.
3. Clean the upper filter screen frame:
   • Unscrew one screw fixed by EVA filter net and back shell with a screwdriver, and take out EVA filter net.
   • Put the EVA filter screen Into warm water with neutral detergent (about 40/104 °c) and dry It in the shade after rinsing clean.

STORAGE

• Unscrew the drainage cover, unplug the water plug, and discharge the water in the water tank into other water containers or directly tilt the body to discharge the water into other containers.
• Turn on the machine, adjust it to low-wind ventilation mode, and maintain this state until the drainage pipe becomes
• dry, so as to keep the inside of the body in a dry state and prevent it from mildewing.
• Turn off the machine, unplug the power plug, and wrap the power cord around the wrapping post; Install the water plug and the drainage cover.
• Remove the exhaust pipe and keep it properly.
• Cover the air conditioner with a plastic bag. Put it in a dry place, keep it out of the reach of children, and take dust control measures.
• Remove batteries of the remote control and keep them properly.
  Note: Ensure that the body is placed in a dry place and keep all machine components properly.

TROUBLESHOOTING

Do not repair or disassemble the air conditioner by yourself. The unqualified repair will lead to the failure of the warranty and may cause damage to users or their properties.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>