HUNTER 19520 Sunjai 9 Light 2-tier Chandelier Owner’s Manual
- June 4, 2024
- Hunter
Table of Contents
HUNTER 19520 Sunjai 9 Light 2-tier Chandelier Owner’s Manual
INSTALLATION
WARNING
PREPARING FOR INSTALLATION CLEANING TIPS
Treat the fixture gently! Regular cleaning will reduce the need for deep
cleaning. For regular cleaning, turn off the light and wipe down the fixture
with a clean lint-free cotton or microfiber cloth. Never spray cleaner
directly onto the fixture. Carefully remove all contents from the carton. Shut
off the power at the circuit breaker and completely remove the old fixture
from the ceiling, including the old mounting bracket. Remove the new mounting
bracket assembly from the bag. One end of the threaded post (D) should be
attached to the mounting bracket (A) with a hex nut (E) in place. The other
end should have the canopy loop (G) attached. Unscrew the canopy loop ring (H)
from the canopy loop (G).
Depending on the placement of your junction box the position of threaded post
(D) may need to be adjusted to allow the canopy to be flush with the ceiling.
Determine this by lifting mounting bracket (A) up to the junction box and
place canopy (F) over the canopy loop (G), so that it is flush with the
ceiling. Adjust the position of threaded post (D) on the mounting bracket (A)
so that the canopy (F) covers at least half of the exterior threads on the
canopy loop (G) while it is securely connected to threaded post (D). The
threaded post (D) can be adjusted by loosening hex nut (E) to allow movement
of threaded post (D) on mounting bracket (A). Once the ideal position of the
threaded post (D) is determined, tighten up the hex nut (E) onto the threaded
post (D) just beneath the mounting bracket (A) to secure the threaded post in
place.
ASSEMBLING THE FIXTURE
Thread wires through and screw the rod with top loop (K) onto the threaded
post (L) of the fixture. By measuring, determine the correct number of chain
links needed for proper hanging height. If necessary, use a pair of pliers to
open and remove any excess chain. Attach one quick-connect link (J) to each
end of chain (I). Use one quick-connect link (J) to attach chain (I) to
hanging ring (K) and securely close. Feed the fixture wires up through the
chain (every three links or so), pulling the wires until taut. Slide canopy
loop ring (H) and canopy (F) onto the chain/wire and thread wires through
canopy loop (G) and threaded post (D).
Use the remaining quick-connect link (J) to attach chain (I) to canopy loop
(G).
To shorten the fixture, trim the wires to desired length. Leave at least 8 to 10 inches of wire in addition to the desired length. Have a helper support the fixture’s weight and attach the mounting bracket (A) to the junction box by securely tightening the mounting screws (C)
CONNECTING THE WIRES
Attach the fixture’s wires to the power supply wires from the junction box.
Connect black to black (Live); white to white (grounded); grounding to
grounding (green or copper). Twist the ends of the wire
pairs together. Then, twist on a wire connector. Make sure all twists are in
the same direction. Loop fixture’s ground wire around grounding screw (E) and
tighten. If there is no ground wire (green or copper) from the junction box,
contact a qualified electrician.
FINISHING THE INSTALLATION
Place the canopy (F) flush to the ceiling and slide the canopy loop ring (H) up beneath the canopy. Tightly screw canopy loop ring (H) onto the canopy loop (G) to properly secure the canopy (F) in place. Adjust the angle of the lamp arms so that they are evenly distributed (see drawing 1) and install candle finials (M). Install light bulb (not included) in accordance with the fixture’s specifications. Do not exceed the recommended wattage. Turn on the power and test the fixture. Your installation is now completed
CLEANING TIPS
Treat the fixture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the fixture with a clean lint-free cotton or microfiber cloth. Never spray cleaner directly onto the fixture.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>