NETGEAR FS108P ProSafe 8-Port Switch Installation Guide
- June 12, 2024
- NETGEAR
Table of Contents
NETGEAR FS108P ProSafe 8-Port Switch
Step 1. Connect equipment
Step 2. Connect power
Step 3. Check status
Specifications
| Specification | Description |
|---|---|
| Network interface | 10/100Mbps Auto-Uplink RJ45 ports with PoE enabled (ports 1 |
– 4) 10/100Mbps Auto-Uplink RJ45 ports (port 5 – 8)
Network cable| Category 5 (Cat 5) or better Ethernet cable
Ports| 8
Power adapter| 48V @ 1.25A DC input
PoE Power consumption| 53W max (all PoE ports, ports 1 to 4), 15.4W max per
PoE port
Weight| 0.74 kg (1.7 lbs)
Dimensions (W x D x H)| 235 mm x103 mm x 27 mm
9.3 in. x 4.1 in.x 1.1 in.
Operating temperature| 0 to 40 C (32 to 104 F)
Operating humidity| 10% to 90% relative humidity, non-condensing
Electromagnetic compliance| CE Class B; FCC Class B; VCCI Class B; C-Tick
Class B, CCC
Safety agency approvals| CE/LVD, CCC
For the complete EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
Statement of Conditions: In the interest of improving internal design,
operational function, and/or reliability, NETGEAR reserves the right to make
changes to the products described in this document without notice. NETGEAR
does not assume any liability that may occur due to the use or application of
the product(s) or circuit layout(s) described herein.
Technical Support
After installing your device, locate the serial number on the label of your
product and use it to register your product at https://my.netgear.com.
You must register your product before you can use NETGEAR telephone support.
NETGEAR recommends registering your product through the NETGEAR web site.
For product updates and web support, visit http://support.netgear.com.
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or
registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United
States and/or other countries. Information is subject to change without
notice. Other brand and product names are registered trademarks or trademarks
of their respective holders. © NETGEAR, Inc. All rights reserved.
For indoor use only in all EU countries and Switzerland.
September 2012
FAQ’s
What is the NETGEAR FS108P ProSafe 8-Port Switch used for?
The NETGEAR FS108P ProSafe 8-Port Switch is used to expand the number of Ethernet ports available for wired network connections and can also provide Power over Ethernet (PoE) to compatible devices.
What is the maximum data transfer speed supported by the FS108P switch?
The NETGEAR FS108P supports data transfer speeds of up to 100 Mbps.
Can I connect more than 8 devices to the FS108P switch?
The NETGEAR FS108P has 8 Ethernet ports, which means you can connect up to 8 devices directly using Ethernet cables.
What is Power over Ethernet (PoE), and does the FS108P support it?
Power over Ethernet (PoE) allows the switch to provide power to compatible devices, such as IP phones and cameras, through the Ethernet cable. Yes, the FS108P supports PoE on some of its ports.
How many PoE ports does the FS108P have?
The NETGEAR FS108P has 4 PoE-capable ports, which means it can supply power to up to 4 PoE-enabled devices.
What is the maximum power budget for PoE on the FS108P switch?
The FS108P has a maximum PoE power budget of 53 watts.
Can I use the FS108P switch for home networks or small businesses?
Yes, the NETGEAR FS108P is suitable for both home networks and small businesses that require additional wired connections and PoE support.
Is the FS108P a managed switch?
No, the FS108P is an unmanaged switch, which means it doesn't offer advanced configuration options typically found in managed switches.
Does the FS108P support auto-negotiation for network speed and duplex?
Yes, the FS108P supports auto-negotiation for network speed and duplex, making it easier to connect devices with different capabilities.
Is the FS108P fanless?
Yes, the NETGEAR FS108P is fanless, which means it operates silently and is suitable for noise-sensitive environments.
Can the FS108P be mounted on a wall or under a desk?
Yes, the FS108P comes with mounting options, including the ability to be wall- mounted or placed on a flat surface.
Reference Link: NETGEAR FS108P ProSafe 8-Port Switch Installation Guide