JOY QSG01311 Axtion Edge MP Touchscreen Installation Guide
- June 4, 2024
- JOY
Table of Contents
JOY QSG01311 Axtion Edge MP Touchscreen Installation Guide
Installation Guide
Guide d’ installation
-
Separate the back cover beginning from the gap on the left bottom side between the plastic frame and back cover
-
Lay the bottom of the device down into the plastic frame, then apply slight pressure to insert the device properly
-
Close the back cover and the plastic frame. Make sure the gap is closed completely.
We recommend cleaning the case after every use cycle. Most hospital-grade disinfectant wipes with high alcohol concentrate are safe to use on the a Xian Edge case. A few that we recommend are:
- Sani-Cloth AF3
- Super Sani-Cloth
- Cave-Wipes
- Clorox Healthcare Bleach Germicidal Wipes
- Oliver TB
Follow these steps:
- Clean the back cover with a hospital-grade wipe, using a small stroking motion. Pay special attention to the crevices.
- Use a new hospital-grade wipe to clean the front cover and screen protector.
- Let the case air dry before using.
Internal cleaning may be done as needed following these steps
- Remove the tablet from the case and set aside.
- Clean the inside back cover with a hospital-grade wipe, using a small stroking motion. Pay special attention to the crevices.
- Use a new hospital-grade wipe to clean the inside front cover and screen protector.
- Let the case air dry before putting the tablet into the case.
- Hospital-grade disinfectant wipes may have more detailed instructions for use. Please refer to the manufacturer’s instructions.
- These instructions are only for cleaning cases by The Joy Factory. To clean the tablet, please refer to the manufacturer’s instructions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>