ATEN CL3108 8/16-Port Short Depth PS/2-USB VGA Single Rail WideScreen LCD KVM Switch User Guide
- June 6, 2024
- Aten
Table of Contents
CL3108 / CL3116
8/16-Port Short Depth PS/2-USB VGA
Single Rail WideScreen LCD KVM Switch
Quick Start Guide
© Copyright 2021 ATEN®
International Co., Ltd.
ATEN and the ATEN logo are registered trademarks of ATEN International Co.,
Ltd. All rights
reserved. All other trademarks are the property of their respective owners.
Part No. PAPE-1223-R10G Released: 03/2021
Package Contents
1 CL3108 / CL3116 LCD KVM Switch with Standard Rack Mounting Kit
2 custom KVM cables
(VGA, USB; 1.8m/6ft)
1 firmware upgrade cable
1 power cord
1 user instructions
Hardware Review
Front View
1. handle
2. LCD display
3. LED illumination light pushbutton
4. LED illumination light
5. port selection pushbutton / LEDs
(8 for CL3108, 16 for CL3116)
6. keyboard
7. touchpad| 8. external mouse port
9. power LED
10. lock LEDs
11. reset button
12. firmware upgrade port
13. firmware upgrade switch
14. LCD on/off button
15. LCD controls
---|---
CL3108 Rear View
1. power socket
2. power switch| 3. KVM port section
4. grounding terminal
---|---
CL3116 Rear View
1. power socket
2. power switch| 3. KVM port section
4. grounding terminal
---|---
Hardware Installation
A standard rack mounting kit is provided with your CL3108 / CL3116 and can be mounted in 1U of rack space.
-
Attach the left and right mounting brackets to the back of the rack, installing four screws in the tabs to secure them in place.
-
Two people insert the CL3108 / CL3116, by sliding its left and right sidebars into the mounting brackets.
-
While one person and the brackets hold the weight of the CL3108 / CL3116, have a second person install four screws in the front tabs to secure the module to the front of the rack.
Note: Allow at least 5.1 cm on each side for proper ventilation, and at least 12.7 cm at the back for the power cord and cable clearance. -
Ground the CL3108 / CL3116 by connecting one end of a grounding wire to the grounding terminal and the other end to a suitable grounded object.
-
Connect any available KVM port to a computer’s keyboard, video, and mouse ports using the custom KVM cable sets.
-
Plug the power cord into the CL3108 / CL3116 power socket and into an AC power source.
Operation
Opening the Console
Pull-on the release bar on the upper handle. Slide the console module out
until it clicks in place, and then raise the LCD module lid.
Closing the Console
To close the console, lower the LCD module until it lies fl at, and slide the
full console in.
OSD Functions
OSD functions are used to configure and control the OSD. For example, you can
rapidly switch to any port, scan selected ports, limit the list you wish to
view, designate a port as a quick viewport, create or edit a port name, or
make OSD setting adjustments.
To access an OSD function:
- Press the dedicated invocation key (KVM OSD) on the keyboard to invoke the OSD. This is the default setting.
- In the submenus, make your choice either by double-clicking it, or moving the highlight bar to the choice and pressing [Enter].
- Press [Esc] to return to the previous menu level.
Hotkey
To invoke Hotkey Setting Mode to do the following:
Number Lock and Minus Keys [Num Lock] + [-]
- Hold down the [Num Lock] key.
- Press and release the [-] key.
- Release the [Num Lock] key.
Press [Esc] to exit Hotkey mode.
HSM Summary Table.
| Key | Function |
|---|---|
| [number], [Enter] | Switches access to the port corresponding to the entered |
number. [number] = 01-08 (CL3108) or 01-16 (CL3116).
[F1]| Enables Windows keyboard emulation (default)
[F2]| Enables Mac keyboard emulation.
[F3]| Enables Sun keyboard emulation.
[H] / [h]| Changes Invoke Hotkey Mode to [Num Lock] + [-] (default) or [Ctrl]
- [F12].
[F5]| Resets (USB) keyboard and/or mouse.
[T] / [t]| Changes Activate OSD Mode to [Ctrl] [Ctrl]
Support and Documentation Notice
All information, documentation, firmware, software utilities, and
specifications contained in this package are subject to change without prior
notification by the manufacturer.
To reduce the environmental impact of our products, ATEN documentation and
software can be found online at http://www.aten.com/download/
Technical Support
www.aten.com/support
Scan for more information
http://www.aten.com/products/productItem.php?model_no=cl3108
http://www.aten.com/ext_libraries/manuals.php?n=cl3108-cl3116
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>