1Mii E301 Single Ear Bluetooth Earbuds User Manual

1Mii E301 Single Ear Bluetooth Earbuds

In Iha Box

• A. Magnetic USB Charging Dock
• B. Single Bluetooth Earbud
• C. L,M,S Size Earns
• D. User Manual

Product Description

• Charging Dock

• Earphones
  The product comes with three types of ear caps. If you feel unwell, it is recommended to replace ear caps of different sizes.

• Wearing Earphones

• Choose the earmuff that is most suitable for your ear, tilt the cap down and gently place the earbud in your ear.

• Tilt the earphone back under the ear ridge to a comfortable angle until it is firmly fixed.

Charging method

Remove the isolation film from charging contacts and fully charge the battery before using the earbuds for the first time.

• Plug the charging dock into the USB port of the car or computer to charge the earbud.
• During the charging of the earbud, the indicator of the earphone is always on the red light.
• When the earbud is fully charged, lights are off.

Starting up

• Plug the charging dock into the USB port of the car or computer to charge the earbud, take the earbud out of the charging dock and it turns on automatically.
• If the earbud is off status after taking it out press and hold the multi-function button for 3 seconds until the blue light flashes 3 times. ,

Sh ut down

• Put it into the charging dock and the earbud will automatically shut down.
• When the power is on, press and hold the multi-function button for about 5 seconds.

Use one earphone

• Auto-connect
  Take one earbud out of the charging dock. After automatic power on, the indicator light flashes alternately red and blue, Turn on the device and search for “E301”.
  After the first connection, the earbud can automatically connect to the last paired device when it is turned on (Bluetooth function needs to be turned on)
  

• Connect manually
  When the earbud Is off, manually turn It on, when the earbud indicator flashes red and blue alternately, turn on the device to connect to Bluetooth.
  

Reset device

If the earbud cannot be connected or work properly, please refer to the following method to reset the earbud:
Take the earbud out of charging dock, press and hold the multi-function button for 15seconds , the red and blue lights flash alternately three times, then release the button and put the earbud into the charging dock, clear the device’s connection record, reset successfully.
(The earbud will automatically enter the pairing state after a successful reset, turn on the device’s Bluetoath to connect)

The main function

• Answer/end call
  When a call comes In, short press the multifunction key to answer; during a call, short press the multi-function button to hang up the phone.

• Reject call
  When a call comes in, press and hold the multi-function button for about 2 seconds to refuse a call.

• Play/pause music
  In standby mode, short press the multi-function button to pause/play music.

• Wake up voice assistant
  In standby mode, press and hold the multi-function button, hear two beeps, and turn on the voice assistant.

• Redial call
  After successfully connecting with the phone, double-click the multi-function button to pull back the last contact in the most recent call.

• Discontinue outgoing calls
  Short press the multi-function button once while making a call.

Basic parameters

• Product model:E301
• Basic parameters of earbud
• Single earbud weight: 4.Sg
• Product Size: 26.5•17. 1 •25mm(earbud) 58•17•11.5mm(charging dock)
•  Communication distance: 1 Om
• Battery capacity: 40mAh
• Charging time: Within 1 hour
• Call duration: About 4 hours
• Standby time: About 150 hours
• Input parameters: 5V = 55mA
• Type of battery: Lithium-ion polymer battery Bluetooth version: Bluetooth 5.0
• Bluetooth protocol: HFP/A2DP/HSP/AVRCP

FCC Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) This device may not cause harmful interference, and(2) Ellis device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with Ille limits for a Class B digital device, pursuant to part 15 of Illa FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures;

• Reorient or relocate the receMng antenna.
• lnaease the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which Ille receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2 : My changes or modifications to lllis unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

https://1mli.com/download-2/

Any questions? Contact:
support@1mll.com
(Response Tlme:4-24h,excl. holidays)

MANUFACTURER
Shenzhen 1 Mii Technologies Limited.
Address: 4th Fl, Bldg B, Runfeng lndustnal Park,
No. 4197 Baoan Blvd., Gushu Community, Xixiang St.,
Baoan Dist., Shenzhen, China.
www.1mii.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>