UltraPro 54508 Color-Changing LED Mini Landscape Lights User Manual

: June 5, 2024
: UltraPro

Table of Contents

[UltraPro 54508 Color-Changing LED Mini Landscape Lights
OPERATION
Ground Installation
Ground Mounting
- Cord Management
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

UltraPro 54508 Color-Changing LED Mini Landscape Lights[

](https://manuals.plus/wp-content/uploads/2022/07/UltraPro-Color- Changing-LED-Mini-Landscape-Lights..png)

Thank you for your purchase!

Instructions made easy
Exclusive deals

Read instructions or watch easy-to-follow video. Scan code or visit byjasco.com/60776i
For deals, to register your purchase and to tell us how we’re doing, simply scan the code or visit byjasco.com/deals
Discover more innovative lighting at byjasco.com/lighting

Like our product? Leave a review on amazon.com
Having problems?
Let us know how we can help. Call 1-800-654-8483 between 7AM-8PM, M-F, Central Time.

IMPORTANT: BEFORE INSTALLING, READ ALL SAFETY INSTRUCTIONS LISTED AT THE END OF THIS MANUAL.

OPERATION

Step 1 – INITIAL SETUP

Carefully unpack your lights from the box. Remove and dispose of the wire ties and plastic bag (see warning on bottom).
When installing landscape lights outside, a ground-fault circuit interrupter (GFCI) receptacle must be used. Before installing, plug the landscape lights into the GFCI receptacle to ensure all lights work properly.

IMPORTANT: Unplug the landscape lights prior to installation.

Step 2 – INSTALLING LANDSCAPE LIGHTS
Each landscape light is designed for mounting with the included stakes (one per light) or for use on a flat surface (see below instructions).

Ground Installation

Carefully plan your installation by laying out your landscape lights in the desired sequence — starting with the GFCI receptacle and power supply. The first light can be within 15ft. of the power supply. Each subsequent light can be placed within 8ft. of each other.
Mount the power supply using either the keyholes on the back or ear-tabs on the side (see Figure A). Do not lay the power supply directly on the ground or where standing water may accumulate (see Figure B).

Ground Mounting

Place light directly on ground or garden bedding.
Using the mounting stake: insert the stake into either keyhole slot on the bottom of the puck and firmly plant it into soil or mulch.
NOTE: If the stake requires more than a firm push, loosen the soil or remove debris.

Cord Management

Your landscape lights feature burial-grade cable. This allows you to conceal excess cable by directly burying it in the soil or covering it with garden bedding.

Flat-Surface Mounting

Lay out the landscape system in the manner in which you plan to mount it. Only mount lights to a solid support structure, such as joist, beams, studs or other sturdy mounting surfaces. Use one #6 pan head screw (not included) of an appropriate length for the mounting surface to properly install the lights.

Step 3 – ACTIVATING LANDSCAPE LIGHTS
To turn on or off, press button on power supply.

Step 4 – MODE SELECTION

Press pushbutton control to activate one of the following color settings:
(1) ON, Warm white; (2) Fade effect; (3) Red; (4) Green; (5) Blue; (6) Yellow; (7) Purple; (8) Pink; (9) Orange; (10) Teal; (11) Christmas; (12) 4th of July; (13) Rainbow; (14) Twinkle effect; and (15) OFF.
Electrical ratings
Input: 120V, 50/60Hz

WARNING: Keep these bags away from babies and children. Do not use in cribs, beds, carriages or playpens. The thin film
may cling to nose and mouth and prevent breathing.
WARRANTY INFORMATION: This Jasco product is warrantied for two (2) years with a limited-lifetime replacement warranty on Enbrighten LED light source only.

WARNING RISK OF ELECTRIC SHOCK

OUTLETS USED FOR POWERING LANDSCAPE LIGHTS SHALL COMPLY WITH ALL NATIONAL AND LOCAL ELECTRICAL CODES. CONSULT LOCAL ELECTRICIAN IF UNSURE OF COMPLIANCE REQUIREMENTS.
FOR USE ONLY ON GFCI-PROTECTED CIRCUITS.
DO NOT SUBMERSE.
DO NOT USE AROUND AQUARIUMS.
LANDSCAPE LIGHTS ARE A WET-LOCATION PRODUCT AND HAVE NO SERVICEABLE PARTS.
DO NOT USE WITH EXTENSION CORD NEAR WATER OR WHERE WATER MAY ACCUMULATE.
KEEP LAMPS AT LEAST 16FT. FROM POOLS
AND SPAS.
KEEP PLUGS AND RECEPTACLES DRY.
AVOID DAMAGE TO THE CORDS AND LAMP ASSEMBLIES DURING INSTALLATION. PERIODICALLY INSPECT THE LANDSCAPE LIGHTS FOR PHYSICAL DAMAGE OR OTHER DAMAGE CAUSED BY OUTDOOR EXPOSURE TO THE ELEMENTS.
REPLACE ANY DAMAGED LANDSCAPE LIGHTS.
DO NOT INSTALL IN LOCATIONS WHERE LANDSCAPE LIGHTS CAN BE STEPPED ON.
ENSURE LANDSCAPE LIGHTS ARE UNPLUGGED FROM POWER DURING INSTALLATION.
CHILDREN SHOULD NOT BE ALLOWED TO PLAY WITH LANDSCAPE LIGHTS.
UL RECOMMENDS TESTING GFCI CIRCUITS AND RECEPTACLES EVERY MONTH TO ENSURE PROPER OPERATION.

RISK OF FIRE

LANDSCAPE LIGHTS ARE DESIGNED TO BE MOUNTED WITH THEIR INDIVIDUAL KEYHOLE MOUNTING FEATURE, DO NOT MOUNT LANDSCAPE LIGHTS BY USING THE MAIN ELECTRICAL CORD OR THE INDIVIDUAL DROP CORDS.
NOT INTENDED FOR INSTALLATION IN O 6THER ENCL17CEILINGS, SOFFIT47O, 617SED SPA48 v1 5S, CABINETCES./21 S, ATTICS OR

MADE IN THAILAND
Distributed by Jasco Products Company LLC,
10 E. Memorial Rd., Oklahoma City, OK 73114.
This Jasco product comes with a two-year limited warranty.
Visit www.byjasco.com for warranty details.
Questions? Contact our U.S.-based Consumer Care at 1-800-654-8483 between 7AM-8PM, M-F, Central Time.