Commercial Electric HPKA315CWB Smart Outlet Switch User Guide
- June 6, 2024
- Commercial Electric
Table of Contents
Commercial Electric HPKA315CWB Smart Outlet Switch
THANK YOU
We appreciate the trust and confidence you have placed in Commercial Electric
through the purchase of this Smart Outlet. We strive to continually create
quality products designed to enhance your home. Visit us online to see our
full line of products available for your home improvement needs. Thank you for
choosing Commercial Electric!
Safety Information
WARNING: For indoor use only. Do not use in wet locations. The total current limit of the device is 15 Amp. To avoid damage, do not exceed the 15 Amps limit. If a direct short is created on the output, the Smart Outlet will be damaged and no longer function. Do not disassemble the product or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact Customer Support.
Make sure to use this product together with 15A circuit breaker in the upstream.
FCC Regulation
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Responsible Party
Leedarson America, Inc. 300 Technology Court SE Suite 100; Smyrna,
GA 30082 1-678-293-8382
Unique Identifier: HPKA315CWB (SKU # 1006368004)
Contains FCC ID: 2AB2Q-LA02301
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and any part of your body.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from
- Consult the dealer or an experienced radio/TV technician for help.
Wireless Protocol
The wifi-certified logo is a certification mark to wifi alliance Apple and the Apple logos are trademarks of Apple, Inc., registered in the U.S., and other countries. App Store is a service mark of Apple Inc. Google and Google Play are trademarks of Google LLC.
Warranty
1 YEAR LIMITED WARRANTY
This product is guaranteed to be free of defects in materials and workmanship
for 1 year from the date of purchase. Guarantee does not include normal wear
and tear.
Package Contents
| Part | Description | Quantity |
|---|---|---|
| A | Smart Outlet | 1 |
| B | Wall Plate | 1 |
| C | Screws for Outlet | 2 |
| D | User Guide | 1 |
| E | Quick Start Guide | 1 |
| Part | Description |
|---|---|
| a | Power Socket 1 |
| b | Indicator Light / Power Button 1 |
| c | Power Socket 2 |
| d | Indicator Light / Power Button 2 |
Installation
- Turn power off at the circuit breaker or fuse for the outlet that you are replacing.
- Remove the old outlet by disconnecting all wires.
- Connect the new outlet wires as follows.
- Mount the outlet with the screws (C) and attach Wall Plate (B).
- Turn power ON at the circuit breaker or fuse. Installation is complete.
Operation
-
the Google Play Store. Download the Hubspace™ app from the App Store or
-
have an account. Create an account to sign in or log in if you already
-
own the app screen. Connect your outlet to power and follow the instructions
NOTE: This Hub space device requires a 2.4GHz Wi-Fi channel. Hub space only shows Wi-Fi networks that your device can use. If you do not see your Wi- Fi network name when you attempt to connect your devices, please check your router settings or move your product closer to your Wi-Fi router. -
4 Tap the ‘+’ button in the upper right corner to add your outlet. NOTE: Bluetooth access is required for device setup.
-
Scan the QR code on the outlet or in the Quick Start Guide. NOTE: If the QR code cannot be scanned, you can enter the code manually. Tap Enter Code and follow the instructions.
-
Using your Smart Outlet
-
To turn both of your outlets on or off at the same time, tap the On/Off button on the Home Page.
-
To control one outlet individually: Tap the name of your Smart Outlet on the Hub space Home Page to display the control screen for each outlet, then you can:a) Turn an outlet on or off. b) Create schedules and set auto-off timers.
-
Besides app control, you are able to manually control the device and turn them on/off with the button on the device.
-
Set up your Voice Assistant: You can connect your smart outlet to Google Home and Alexa from the Hub space app. Or, you can sign in to Alexa app or Google Home and connect to your Hubspace devices from there.
Specification
LED
State
| Outlet State| Meaning| Action To Take
---|---|---|---
Orange Quick Blink
| ****
Off
| ****
Wi-Fi is not connected.
| Set up Wi-Fi for the product. If you have already set up Wi-Fi for this product, wait for it to connect. Check the Hubspace app for connectivity status.
minutes of receiving AC power, the Orange Quick Blink discontinues. You can still add the device to WiFi at any time.
Orange/Green Quick Blink
| ****
On
Off| Off| The outlet is off.| ****
No action required.
Green| On| The outlet is on.
Red| Off| There is a WiFi error.| Go to the device settings in the app and set
up WiFi again. Check that your WiFi Access Point is allowing the device to
join the network.
Orange| On
Input| 120VAC, 60Hz
---|---
Output| 120VAC, 60Hz,15A Maximum load, Resistive
Network Wireless Type| 2.4GHz, IEEE 802.11b/g/n
Operating Temperature| 32° F(0°C)–104° F(40°C)
Operating Humidity| 5-85% RH, Non-condensing
Certification| FCC, ETL
Troubleshooting
| Problem | Solution |
|---|---|
| What devices can be controlled with the Smart Outlet? | You can control any |
small appliances (less than max load 1800W) in accordance
My Hubspace device is not connecting to Wi-Fi.| Make sure your device is
connected to a power source. Your Internet connection or Wi-Fi network may be
down.
My device cannot nd any Wi-Fi networks.| Make sure you have a 2.4GHz capable
Wi-Fi network within range of the device you are trying to add.
My device is in a location that does not have Wi-Fi. Can I still use it with
the Hubspace app?| Yes. Use the app on a phone with an Internet connection
like LTE. The phone must be within Bluetooth range of your Hubspace device and
have Bluetooth enabled.
Problem| Solution
---|---
I cannot nd the QR code.| It is on the outlet housing. A copy of the QR code
is also included in your device’s documentation.
The QR code has become damaged. How do I add the device?| Under the QR code
are numbers. You can enter those in manually instead of scanning the code.
I lost my QR code. How do I add a device?| 1. Make sure the device is
connected to power.
2. In the Hubspace app, tap +, then Add Device.
3. On the Scan Device screen, tap the Search button in the lower right corner.
4. Follow the instructions on-screen.
A device is on another account. How do I transfer it?| Scan the QR code and it
will transfer to your account.
My device is of ine for long periods of time.| Make sure your Wi-Fi signal
strength is suf cient. You may need to move your
router, use mesh Wi-Fi, or Wi-Fi extenders.
The device is on and I scanned the QR code, but the app cannot connect to it.|
Turn off Bluetooth on your phone and turn it back on. Then, scan the QR code.
If the problem persists, turn your phone off and on, then try again.
Can I scan the same QR code to add multiple products?| No. Each product has a
unique QR code.
Questions, problems, missing parts? Before returning to the store, call
Hubspace Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday
1-877-592-5233
HOMEDEPOT.COM/Hubspace
Retain this manual for future use.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>