Kwikset Smartcode 914 Touchpad Electronic Deadbolt User Guide
- June 6, 2024
- Kwikset
Table of Contents
- Smartcode 914 Touchpad Electronic Deadbolt
- Parts List
- 5. Install the interior assembly
- SmartCode at a Glance
- Switches and Status LED colors
- Deleting a single user code (manually at the lock)
- System Alerts
- Troubleshooting
- Factory Reset
- Network Information
- SmartKey Re-Keying
- Important Safeguards
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Smartcode 914 Touchpad Electronic Deadbolt
Installation and User Guide
Parts List
1. Begin with your smart home app
If you will be using a smart home app with your lock, download the app and set up your controller or hub before proceeding further with lock installation.
2. Prepare the door and check dimensions
3. Install the latch and strike
4. Install the exterior keypad
5. Install the interior assembly
6. Install the batteries and perform the door handing process
This step will teach your lock the orientation of your door and is crucial to lock operation.
7. Pair the lock with your smart home system
8. Add user codes (30 maximum)
It is recommended that you add and delete all user codes through your smart home system. If your system does not allow this, codes may be added directly to the lock as shown here.
9. Test the lock and check door alignment
10. Install the interior cover
SmartCode at a Glance
Switches and Status LED colors
These features can be adjusted in some smart home apps. Once the associated functions are set by Zigbee, the setting of switches #1, 2 & 3 no longer affect the lock operation until factory reset.
Deleting a single user code (manually at the lock)
Note: All codes may be deleted at once if the mastercode is enabled. For more information about the mastercode, consult the SmartCode 914 Programming and Troubleshooting Guide at www.kwikset.com.
System Alerts
*Beeping sound will only be heard if switch #3 is on.
Troubleshooting
A complete SmartCode 914 Programming and Troubleshooting Guide is available at www.kwikset.com.
Factory Reset
A factory reset will delete all codes associated with the lock, and it will remove it from your smart home system.
Network Information
ZigBee System Notes
ZigBee is a “Wireless mesh network,” and results may vary based on building
construction and communication path, with 35+ feet being typical installed
distance in a standard home environment and 250 feet+ when the lock has a
clear line of sight with the smart home controller or hub. It may be necessary
to install additional ZigBee devices to enhance the communication path between
the lock and controller/hub for a more robust ZigBee network.
Removing the lock from the network
Press button “B” on the lock interior nine times.
SmartKey Re-Keying
Re-key the lock to work with your existing key. See the supplied SmartKey Re- key instructions for more information.
Note: If Auto-Lock is enabled (see “Switches and Status LED Colors”), remove the battery pack before re-keying your lock.
Important Safeguards
- Read all instructions in their entirety.
- Familiarize yourself with all warning and caution statements.
- Remind all family members of safety precautions.
- Protect your user codes and mastercode.
- Dispose of used batteries according to local laws and regulations.
CAUTION: Prevent unauthorized entry. Since anyone with access to the back panel can change the user codes, you must restrict access to the back panel and routinely check the user codes to ensure they have not been altered without your knowledge. The use of a mastercode can help protect your system’s settings.
WARNING: This Manufacturer advises that no lock can provide complete
security by itself. This lock may be defeated by forcible or technical means,
or evaded by entry elsewhere on the property. No lock can substitute for
caution, awareness of your environment, and
common sense. Builder’s hardware is available in multiple performance grades
to suit the application. In order to enhance security and reduce risk, you
should consult a qualified locksmith or other security professional.
©2021 Spectrum Brands, Inc. All Rights Reserved. Lake Forest, CA 92610.