DELTA PI703M26000C Sub 1G and BLE Module User Guide

MyDeltaSolar DC1 and User Interface
RPI703M260000-C
Sub-1G & BLE Module

Model Name: RPI703M260000-C

Additional notes:
(15.21) Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment.

1. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons.
   (Not including low power device (below 20mW))

2. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
   This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
   reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
   However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
   which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
   ◆ Reorient or relocate the receiving antenna.
   ◆ Increase the separation between the equipment and receiver.
   ◆ Connect the equipment into an outlet on a circuit different from that to which the receiver is needed.
   ◆ Consult the dealer or an experienced radio/TV technician for help.
   This device is intended only for OEM integrators under the following conditions:

1. The antenna must be installed such that 20 cm is maintained between the antenna and users. For laptop installations, the antenna must be installed to ensure that the proper spacing is maintained in the event the users place the device in their lap during use (i.e. positioning of antennas must be placed in the upper portion of the LCD panel only to ensure 20 cm will be maintained if the user places the device in their lap for use) and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as the 2 conditions above are met, further transmitter testing will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for
   re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.
   End Product Labeling
   This transmitter module is authorized only for use in devices where the antenna may be installed such that 20 cm may be maintained between the
   antenna and users (for example access points, routers, wireless ASDL modems, certain laptop configurations, and similar equipment). The final end
   product must be labeled in a visible area with the following: “Contains TX FCC ID: 2ARTO-RPI703M26000C
   Un-license band: This device complies with Part 15 of the FCC Rules.
   Operation is subject to the following two conditions:
   (1)this device may not cause harmful interference, and
   (2)this device must accept any interference received, including interference that may cause undesired operation.

Download MyDeltaSolar APP |Download APP

MyDeltaSolar

1. This APP should collocate with the data collector and Delta Inverter.
2. If the inverter is not connected to the cloud, you still can monitor inverter operation by APP.

Where can search for the MyDeltaSolar APP?

• QR Code: Please scan the QR code to DSC cloud (web).
• IOS system: Please search “MyDeltaSolar” in the App store.
• Android system: Please search “MyDeltaSolar” in Google Play.

https://mydeltasolar.deltaww.com/index.php?p=manual

https://itunes.apple.com/ng/app/mydeltasolar/id1271609228?mt=8
https://play.google.com/store/apps/details?id=com.mydeltasolar_1_0_0.app&hl =zh- TW

User & Plant Register Of Cloud Create a new account

Cloud Register & Plant Register | User & Plant Register Of Cloud

Connect to DC1| Please turn on DC1

Change password |Connect to DC1 And Setting

Please select country and grid code, then go to home page | Connect to

DC1 And Setting

Search Inverters and Set ID |Connect to DC1 And Setting

– Select All :
This button will select all inverters.
When there are more than 25 inverters, the topmost 25 inverters will be selected.
– RSSI :
Indicate the signal quality of every inverter. The larger is better.

• The search result will be sorted by RSSI, the most recommended inverters will be on the top of the list.

– Auto ID :
This button will automatically assign a unique ID to every inverter which is selected.

– Confirm Inverter:
Users cannot select more than 25 inverters, and duplicated ID is not allowed.

– Status :
OK: Set inverter ID success.
Fail: Set inverter ID fails, need a refresh.

– Get Info
All selected inverters need to be set ID successfully.

After the user choose an available Wi-Fi network, then pop-up the message

|Connect to Cloud

Connect to MyDeltaSolar cloud |Connect to Cloud

Use MyDeltaSolar Service terms and conditions :
You must need a MyDeltaSolar account in order to use our cloud services. Delta may collect your personal data and protect your privacy when you use the MyDeltaSolar service. By using the MyDletaSolar service, you agree that Delta can use such data and monitor your inverter’s status if necessary. In some cases, Delta employees, authorized contractors, or agents may need to use your account to analyze any issue and problem you have while using Delta solar inverter or service. We restrict access to personal information to Delta employees, contractors, and agents who need to know that information in order to process it for us, and who are subject to strict contractual confidentiality obligations and may be disciplined or terminated if they fail to meet these obligations.

INFO

HISTORY

GRID SETTING

Smarter. Greener. Together.

To learn more about Delta, please visit www.deltaww.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>