anslut 008732 Work Lamp Instruction Manual

June 6, 2024
anslut

anslut 008732 Work Lamp

anslut 008732 Work Lamp

SAFETY INSTRUCTIONS

  • Do not look directly into the light when it is switched on.
  • Never point the beam at the eyes of people or animals.
  • Store out of the reach of children.
  • Can be used indoors and outdoors, but do not immerse in water or any other liquid.
  • Do not charge the product outdoors-this will not comply with protection rating IP65.
  • Do not use the charger to charge other products.
  • Only use the supplied charger to charge the lamp.
  • The switch must be in the off position during charging, otherwise this can damage the light.
  • Never cover the lens or reflector when in use.
  • Do not attempt to replace the battery.
  • The product must be discarded if the glass front is cracked.
  • The LED light source is not replaceable. When the light source has reached the end of its useful life the complete product must be replaced.

SYMBOLS

anslut 008732 Work Lamp 2

TECHNICAL DATA

  • Battery: 3.7 V/5000 mAh
  • Output: 10/3 W
  • Protection rating: IP54
  • Luminous flux: 1000/220 Im
  • Colour temperature: 6500 K
  • Charging time: Approx. 4 h
  • Run time: Max3/10 h
  • Operating temperature: -10-40° C

DESCRIPTION

  1. Car spotlight
  2. Main spotlight
  3. Charger stand
  4. Micro USB port
  5. Battery indicator
  6. Hook (rotational 360° )
  7. Micro USB port
  8. Switch
  9. Battery indicator
  10. Magnetic mount (swivels 90°)

HOW TO USE

Press the switch to switch on and off. The following functions by pressing the switch:

Number of times Function
  Main spotlight 100%
2 Main spotlight 50%
3 Main spotlight 10%
4 Car spo tli ght
5 OFF

NOTE:

  • If the switch is not touched for 3 seconds the next time it is pressed will switch it off.
  • Emergency function: when the emergency function is used the main spotlight will shine at 10% power.

CHARGING THE BATTERY

  • The battery must be charged before using for the first time.
  • Connect the USB charger to the power supply.
  • Connect the charger cord to the micro USB port.
  • The battery charge status is shown on the battery indicator. When all four battery charging lights go on the battery is fully charged.
  • The battery should be changed every three months to maintain its capacity.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals