PROZIS HABITAT Self Lighting Plant Grower User Manual

: June 6, 2024
: PROZIS

Table of Contents

Legal compliance statement
Safety warnings
PACKAGE CONTENTS:
INSTRUCTIONS
Warranty statement
EXCLUSIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HABITAT
Self Lighting Plant Grower
User Manual
Warranty Statement
V.1 03/2021

|
---|---

PROZIS is a registered trademark of PROZIS.COM, S.A.
PROZIS reserves the right to adjust or modify the product or any of the associated documentation in order to ensure its suitability for use, at any time and without prior notice.
The most recent version of this product’s user manual can be found at www.prozis.com/user-manuals.

Legal compliance statement

By means of this document, PROZIS declares that the Habitat Self-Lighting Plant Grower is fully compliant with all the standards specified in the applicable legislation as well as other relevant clauses. Prozis will always be available for any additional explanation through our customer support communication channels, available at www.prozis.com/support
To avoid any impact on the environment or on human health due to dangerous substances present in electrical and electronic devices, the end-users of such devices are expected to understand the meaning of the symbol consisting of a crossed-out waste container. Do not dispose of waste electrical and electronic equipment along with the unsorted household waste. Dispose of it separately and properly instead.
The packaging that protects the device against transport damage is made from non-polluting materials that can be disposed of via local recycle bins.

Safety warnings

DANGER! This symbol, when combined with the note Danger, means high risk. Failure to observe this warning may lead to injury to life and limb.

DANGER FOR CHILDREN AND PEOPLE WITH DISABILITIES

Packing materials are not toys. Children must not play with the packaging materials. There is a suffocation risk.
This product may be used by children 8 years and up as well as persons with physical, sensory or mental impairments or lacking experience and knowledge, when supervised or instructed in the safe use of the product and understanding the associated risks.
Children must not play with the device.
Cleaning and maintenance must not be performed by children without supervision.
Keep the device out of the reach of children.

THIS DEVICE IS INTENDED ONLY FOR INDOOR USE

The LED lights cannot be replaced. None of the components in this fixture are replaceable by the user. Do not attempt to access or modify internal components.

CAUTION! This symbol highlights dangerous situations which may lead to minor to moderate injuries, damage, malfunction, and/or destruction of the device.
To prevent harm or damage from happening to users or others, make sure to comply with the following requirements.
CAUTION! RISK OF PROPERTY DAMAGE

Operate the appliance only with the supplied power adapter. Both the appliance and the adapter are strictly intended for use in dry, indoor environments.
Check the product before every use. Discontinue use if any damage to the product, adapter, or cable is detected.
None of the parts in this product can be serviced by the user.
Keep the product away from moisture, dripping, and splashing water.
Do not place burning candles or other sources of an open fire on or next to the product.
In case of any smoke or unusual noise or odor, immediately disconnect the adapter from the power supply.
Sudden temperature changes may cause condensation inside the product. In this case, allow the product to acclimate for some time before using it again, in order to prevent short circuits.
Do not operate the product near direct heat sources such as radiators.
Do not throw the product into fire or expose it to high temperatures.
Never open the product. It has no internal parts requiring maintenance.

PLEASE BE CAREFUL WHEN ADDING WATER TO THE TANK. NEVER EXCEED THE MAXIMUM WATER LEVEL!
FIRST-AID MEASURES IN CASE OF PLANT FOOD ACCIDENTS

General advice: In case of accident or unwellness, seek medical advice immediately.
Inhalation of fumes or combustion products: Make sure the victim gets access to fresh air and is in a comfortable breathing position. If unwell, seek medical advice/attention.
Ingestion: Rinse the mouth with water, drink plenty of water, vomit if possible, and see a physician immediately after that.
Eye contact: Keep the eyelids apart and away from the eye, move the eyelids by lifting the upper and lower lids occasionally, flush the eyes with plenty of water or saline water for at least 15 minutes. If irritation persists, see a physician.
Skin contact: Wash off immediately with soap and plenty of water while removing any contaminated clothing. Wash contaminated clothing before use. If skin irritation persists, see a physician.

PACKAGE CONTENTS:

1 × Prozis Habitat – plant grower
1 × AC/DC adapter
1 × Quick guide
2 × Plant food
7 × Grow basket & sponge

PRODUCT DESCRIPTION: SEE PAGE 2

Light panel
Extendable rod
Basket container
Filling nozzle with rubber plug
Water tank cover
Water tank
Powerpack
Power adapter
7 × Seed pod kit
Plant food A
Plant food B

CLEANING AND MAINTENANCE

Switch the product off and remove all plugs before cleaning!
When cleaning the components, do not use aggressive or abrasive cleaning agents or materials such as scouring milk or steel wool. These could damage the surface of the
appliance!
Protect the appliance from water drops and water spray.
Only use a clean, dry cloth for cleaning the appliance, and never any corrosive liquids. Use a slightly damp cloth and a mild cleaning agent to remove stubborn dirt.
Make sure no moisture enters the product during cleaning, to prevent damage to the product and related repairs.

STORAGE

Allow the appliance to cool down completely before storing it.
When no longer using the appliance, store it in a dry environment, protected from dust and direct sunlight.
Store your appliance inside the original case provided.

INSTRUCTIONS

Installation

Take the contents out of the box. Pull up the light panel rod with one hand while holding the water tank in place with the other.
Remove the water tank cover and take out the accessories: power adapter, seed pot kit, and two plant food bottles.
Before planting, pull out the light panel by the rod. Wash and dry the water tank.
With the top cover off, reinstall the light panel with one hand while holding the water tank in place with the other.
Assemble the power pack at the bottom of the tank. When all is ready for planting, connect the adapter to the power supply. When properly connected, a ‘beep’ sound is played as confirmation.

Planting
• Preparing the plant food solution

Fill both plant food bottles A and B with purified water and shake well so the contents mix properly.
Using the markings on the inside of the bottlecap to measure, add 5 mL of each solution per 1 liter of water, and stir well to obtain a uniform mixture. To fill the whole tank, you will need about 4 L of water/plant food solution mixture.

• Filling the water tank

Remove the rubber plug from the filling nozzle and pour the well-mixed solution into the water tank. Always make sure to keep the level below the **Max**indication to prevent
overflow.

• Sowing the seeds and installing the baskets

Soaking the seeds in warm water for about 1 hour beforehand is recommended to ensure normal sprouting. After that, insert each seed into a grow sponge, and each sponge into a growing basket. Lastly, place each basket into a planting hole in the tank cover.

This button turns on the plant grower in **normal** mode. The light panel will run a 14h-on/10h-off cycle that repeats itself every 24h.
This button turns on the plant grower in**enjoy** mode. The light panel will decrease the light intensity and run a 12h-on/12h-off cycle that repeats itself every 24h. This cycle will start when the button is pressed while the plant grower is turned off.
This button turns on the plant grower in **grow** mode. The light panel will increase light intensity, and run a 16h-on/8h-off cycle that repeats itself every 24h. This cycle will start when the button is pressed while the plant grower is turned off.

How the clock works
The plant grower’s built-in clock automatically starts to work in a 24h cycle as soon as it is connected to a power supply. Regardless of which mode is set (Normal, Enjoy, Grow), the system will start and the LED will turn on automatically.
If you want to turn the light on during a light-off period of the 24h cycle, keep the power button pressed for 3 seconds. The light will blink 3 times and then turn on permanently until the clock switches the light back to automatic mode the next day.

Warranty statement

All electrical and electronic products commercialized by Prozis via www.prozis.com are covered by the warranty applicable to the purchase and sale of consumer goods.
GENERAL CONSIDERATIONS
This document contains the terms and conditions of Prozis’ warranty for final consumers. This warranty is valid exclusively for consumers who purchase the product for non-professional purposes.
WARRANTY PERIOD
Prozis guarantees the product is to remain free from material and production defects for a 2-year period, counting from the date of initial purchase by a consumer and respective delivery, or for longer if legally established by the applicable national law. In the event that repair is required, this 2-year period is suspended during repair time.
CONSUMABLES
The gradual performance decrease caused by prolonged use of the product’s consumable components, such as batteries, is not covered by this warranty unless the malfunction is
caused by faulty design, materials or production.
HOW TO MAKE A CLAIM
If the need arises to exercise the rights conceded to you through this warranty, please contact Prozis customer service via the communication channels provided on the Prozis website, and follow the provided instructions or recommendations. Contact and technical assistance information is also provided at the end of this warranty. Any claims made regarding this warranty will only be valid if proof of purchase is presented by the original customer. This proof of purchase may be the original invoice or receipt, as long as it includes information regarding the date of purchase and the product’s model name.
WARRANTY REPAIRS
Any repairs made under this warranty cannot be made by third parties. This warranty does not apply to any repairs, or damage caused directly by such repairs, that have impacted or caused the damage that is the subject of the respective warranty claim.

EXCLUSIONS

The following situations are not covered by this warranty:

Any wear and tear of parts and components resulting from normal product use.
Cracks, dents, scratches, and other types of surface damage only affect the product’s appearance.
Any malfunction caused by inappropriate use of the product that does not comply with user manual instructions.
Use and storage of the product not complying with user manual instructions.
Opening of the product by a third party who is not authorized to proceed to its repair.
Altering or changing parts or components, whether internal or external.
Damage caused by battery leakage resulting from the breaking of any of its components, or from product misuse.
Malfunction or damage due to reasons that cannot be ascribed to the production or design of the product.
Use of the product in the context of a business, occupation, or commerce.
Malfunction due to use that does not comply with the technical or security norms in force, or with user manual instructions.

The services provided by Prozis in order to repair or fix any fault or malfunction resulting from the verification of any of the aforementioned excluded situations will be subject to payment of labor, transport, and component costs.
The customer shall bear all risks of loss and damage to the product during transportation to Prozis. This warranty will be void if the returned product arrives with labels or stickers that have been removed, damaged, tampered with, or modified in any way.

LIMITED RESPONSIBILITY
Prozis cannot be held responsible for indirect damage or loss due to usage of the product.
WHAT TO DO?
To request warranty service, you must first contact Prozis customer service via the communication channels provided on the Prozis website, and follow the provided instructions and recommendations.
Send back the product inside its original packaging, including all accessories and documentation, to the following address:

PROZIS
Rua do Cais nº 198
4830-345 Póvoa de Lanhoso
Braga – Portugal
CONTACTS
Prozis is always available for additional clarification through their customer service communication channel at www.prozis.com/support.

Zona Franca Industrial
Plat 28 – Pavilhão K – Mod 6
9200-047 Caniçal, Madeira