PROZIS 1711867859 Equator Blender Instruction Manual

PROZIS 1711867859 Equator Blender

Safety

Safety Warnings

CAUTION! This symbol highlights dan-gerous situations which could lead to light injuries, or damage, malfunction, and or destruction of the device. To prevent harm or damage from happen- ing to users or others, make sure to comply
with the following requirements.

• Improper use of the appliance may lead to injury. Please handle this with care at all times.
• Always make sure the appliance is disconnected from the power supply when leaving it unattended, or before assembling, disassem-bling or cleaning.
• Do not immerse the motor unit, the power cable or the power plug in water or any other liquid.
• Use the appliance only in dry, indoor environments. Never use it outdoors or in moist environ-ments.
• This appliance must not be used by children. Keep the appliance and the power cord out of reach of children. Children must not be allowed to play with the appliance.
• This appliance can be used by individuals with limited physical, sensory or mental capabilities, or without adequate experience and/or knowledge, only when they are supervised by someone responsible for their safety, or have been duly instructed on the dangers involved and how to use the appliance safely.
• Never insert your hands or fingers in the mixing jar, especially while it is in use. The blades are extremely sharp.
• Do not remove the lid while the appliance is being used. Contents may be ejected from the blender at high speed.
• Be careful when handling the blades, emptying the jar, and cleaning the appliance.
• Do not blend hot liquids. They may steam and expand during blending, which may lead to the lid being removed and cause the contents to be ejected from the blender.
• Never switch the appliance on while the jar is empty or filled only with dry foods.
• Before adding, removing or changing accessories, make sure the appliance is switched off and disconnected from the power supply.
• This appliance is intended for home use only and not for environments such as:
  • Staff kitchens in shops, offices or other workplaces
  • Farmhouses
  • Customer use in hotel, motels and other residential-type environments and breakfast establishments
•  Make sure the power cable never gets wet or damp during use. Always place the cable in such a way that it is free of any obstructions, so it does not get clamped or otherwise damaged.
• If the power cord becomes damaged, it must be replaced by the manufacturer, its service agent or other similarly qualified professionals, in order to avoid danger.

CAUTION!

To prevent thermal shock and breaking of the glass jar due to improper use:

• Use only cold or room-temperature water in the jar –never hot water.
• Use the glass jar only when the glass is at room temper-ature. If the jar is very cold or very hot, wait for it to reach room temperature.
• After cleaning the jar manually or in the dishwasher, let it rest until it reaches room temperature.
• Do not use hot liquids or hot ingredients in the jar.
•  Do not expose the glass jar to thermal shock. For exam-ple:
• Do not clean the jar in hot water or the dishwasher immediately after chopping ice. Similarly, after cleaning the jar using hot water or the dishwasher, let it cool down before using it to chop ice.
• Never add hot or warm water to the glass jar immediately after chopping ice.

User manual

PACKAGE CONTENTS

• 1 × Motor unit
• 1 × Blending jar
• 1 × Jar lid with measuring cup
• 1 × Chopping attachment
• 1 × Grinding attachment
• 1 × Quick guide

PRODUCT OVERVIEW

1. Lid
2. Measuring Cup
3. Spout
4. Jar with Extractor Blade
5. Handle
6. Motor Unit
7. Control Knob
8. Base
9. Foot
10. Chopping Attachment
11. Grinding Attachment

Control knob

• P – Pulse Mode
• 0 – Off/Standby Mode
• 1 – Low-Speed Mode
• 2 – High-Speed Mode

CLEANING AND MAINTENANCE

The Jar with Extractor Blade can be cleaned safely and quickly using the convenient auto-clean feature:

1. Pour some warm, soapy water into the Jar and turn the Control Knob to the P position for a few seconds.
2. Remove the Jar from the Motor Unit in an upward movement and rinse it, along with the Lid, under running water.
3. Wipe the outside of the Motor Uni t using a damp cloth. Never use abrasive cleaning agents or immerse it in water for cleaning.
4. Dry all parts and replace them. To clean the appliance more thoroughly, follow these additional steps:
5. Twist off the Extractor Blade at the bottom of the Jar in a clockwise movement. Do this carefully, the blade is very sharp.
6. The Extractor Blade and other detachable accessories can be washed carefully by hand, using warm, soapy water. Alternatively, they can be cleaned in the dishwasher. The components are dishwasher-safe as long as the temperature does not exceed 50ºC.

Strongly aromatic ingredients like cumin and coriander, and vegetables such as carrots, can leave odors or stains that are hard to remove. To remove these, follow these instructions

1. Fill the Jar with warm, soapy water up to the 1.5 L mark.
2. Set it aside and let it soak for 5 minutes.
3. Wash it with a mild detergent and warm water.
4. Rinse the Jar well and dry it thoroughly.
5. In case of strong odours, store the jar with the lid off for a time to allow the air to circulate.

INSTRUCTIONS

Important notes

• Before first-time use, disassemble and wash all parts except for the Motor Unit in warm soapy water, and then rinse and dry them. Never immerse the Motor Unit in water to avoid the danger of electric shock.
• Always make sure the blender is on a stable, flat surface before using it.
• When placing the Jar with the Extractor Blade on the Motor Unit, the inserts at the bottom of the Jar need to be properly aligned with the slots on the Motor Unit so that the spout is on the left and the handle on the right-hand side. Otherwise, the blender will not work.
• Always close the Jar with the Lid, and the Lid with the Measuring Cup, to ensure safe use of the appliance. If the Lid is not properly tightened, the blender will not work.
  Turn the Control Knob to the desired setting. There are 4 available settings: P, 0, 1,

Turn the knob to the P position and hold to use pulse mode for fast, on-and- off chopping. When done, release the Control Knob so it returns to the 0 position.

How to blend fruit and

1. The Jar with Extractor Blade is suitable for making fruit or vegetable mixtures with both juice and pulp.
2. Make sure the Jar is properly placed on the Motor Unit, and the Control Knob is in the 0 position before plugging in the appliance.
3. Whenever applicable, peel and core the fruits and vegetables, and cut them into small pieces before placing them in the jar.
4. It may be necessary to add water to facilitate the blending process. A good proportion of food and water is usually 2:3, respectively. Make sure the total amount does not exceed the 1.5 L mark indicated on the Jar.
5. Place the Lid on the Jar and twist it into the proper position
6. Turn the Control Knob to the desired setting. When using Pulse Mode, the knob must be manually held in place.
7. Return the knob to the 0 position when the mixture has reached the desired consistency

Notes

• Never operate the appliance for more than 3 consecutive minutes. A minimum rest period of 1 minute between two consecutive cycles is required.
• Never place boiling hot liquids in the jar or operate the blender while empty.
• Remove the Jar from the Motor Unit in an upward movement, carefully remove the Lid, and pour and serve.

How to use the attachments

• Use the Chopping Attachment for chopping and blending softer ingredients, and the Grinding Attachment for grinding and crushing drier, harder ingredients.
• Make sure to properly fill and close the attachment to be used before fitting it on the motor unit. Align the inserts at the bottom of each attachment properly with the slots on the Motor Unit, then press the attachment down and turn clockwise until it locks into place. Otherwise, the blender will not work.

Troubleshooting

Some issues that may arise can be solved by the user. If the problem persists after having tried the following solutions, please contact Prozis customer service

WARRANTY STATEMENT

All electrical and electronic products commercialized by Prozis via www.prozis.com are covered by the warranty applicable to the purchase and sale of consumer goods.

• GENERAL CONSIDERATIONS
  This document contains the terms and conditions of Prozis’ warranty for final consumers. This warranty is valid exclusively for consumers who purchase the product for non-professional purposes.

• WARRANTY PERIOD
  Prozis guarantees the product is to remain free from material and production defects for a 3-year period, counting from the date of initial purchase by a consumer and respective delivery, or for longer if legally established by the applicable national law. In the event that repair is required, this 3-year period is suspended during repair time.

• CONSUMABLES
  The gradual performance decrease caused by prolonged use of the product’s consumable components, such as batteries, is not covered by this warranty unless the malfunction is caused by faulty design, materials or production.

• HOW TO MAKE A CLAIM
  If the need arises to exercise the rights conceded to you through this warranty, please con-tact Prozis customer service via the communication channels provided on the Prozis website, and follow the provided instructions or recommendations. Contact and technical assistance information is also provided at the end of this warranty. Any claims made regarding this warranty will only be valid if proof of purchase is presented by the original customer. This proof of purchase may be the original invoice or receipt, as long as it includes information regarding the date of purchase and the product’s model name.

• WARRANTY REPAIRS
  Any repairs made under this warranty cannot be made by third parties. This warranty does not apply to any repairs, or damage caused directly by such repairs, that have impacted or caused the damage that is the subject of the respective warranty claim.

EXCLUSIONS
The following situations are not covered by this warranty:

1. Any wear and tear of parts and components resulting from normal product use.
2. Cracks, dents, scratches, and other types of superficial damage that only affect the product’s appearance.
3. Any malfunction caused by inappropriate use of the product that does not comply with user manual instructions.
4. Use and storage of the product not complying with user manual instructions.
5. Opening of the product by a third party who is not authorized to proceed to its repair.
6. Altering or changing parts or components, whether internal or external.
7. Damage caused by battery leakage resulting from the breaking of any of its components, or from product misuse.
8. Malfunction or damage due to reasons that cannot be ascribed to the production or design of the product.
9. Use of the product in the context of a business, occupation or commerce.
10. Malfunction due to use that does not comply with the technical or security norms in force, or with user manual instructions.

The services provided by Prozis in order to repair or fix any fault or malfunction resulting from the verification of any of the aforementioned excluded situations will be subject to payment of labor, transport and component costs.
The customer shall bear all risks of loss and damage to the product during transportation to Prozis. This warranty will be void if the returned product arrives with labels or stickers that have been removed, damaged, tampered with or modified in any way.
LIMITED RESPONSIBILITY
Prozis cannot be held responsible for indirect damage or loss due to usage of the product.
WHAT TO DO?
To request warranty service, you must first contact Prozis customer service via the commu-nication channels provided on the Prozis website, and follow the provided instructions and recommendations. Send back the product inside its original packaging, including all accessories and documentation, to the following address:

• PROZIS
• Rua do Cais nº 198
• 4830-345 Póvoa de Lanhoso
• Braga – Portugal

Legal compliance statement

• Through this document, PROZIS declares that the Equator blender is fully compliant with all the standards specified in the applicable legislation as well as other relevant clauses Prozis will always be available for any additional clarification through our customer support communication channels, available at www.prozis.com/support
• To avoid any impact on the environment or on human health due to dangerous substances present in electrical and electronic devices, the end users of such devices are expected to understand the meaning of the symbol consisting of a crossed-out waste container. Do not dispose of waste electrical and electronic equipment along with unsorted household waste. Dispose of it separately and properly instead.
• The packaging that protects the device against transport damage is made from non-polluting materials that can be disposed of via local recycling bins
• The product and packaging materials are recyclable, dispose of them separately for better waste treatment. The Triman logo is valid in France only.
• The parts of the device that come into contact with food are suitable for food products

CONTACTS

• Prozis is always available for additional clarification through their customer service commu-nication channel at www.prozis.com/support  
• PROZIS.COM,S.A.
• Zona Franca Industrial Plat 28 – Pavilhão K – Mod 6 9200-047 Caniçal, Madeira

References

• Prozis – Official Store | Exceed Yourself!
• Prozis – Official Store | Exceed Yourself!
• Customer Service

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>