Menuett 009986 Drier Rack Instruction Manual
- June 6, 2024
- Menuett
Table of Contents
Menuett 009986 Drier Rack
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions). Jula reserves the right to make changes. For latest version of operating instructions, see www.jula.com
SAFETY INSTRUCTIONS
SYMBOLS
TECHNICAL DATA
- Size: L 14 m
DESCRIPTION
- Wall
- Expander plug
- Long screw
- Short screw
- Screw hook
- Drum lock
ASSEMBLY
- Mark out the position of the fastener and screw the fastener to the wall.
- Drill the right mounting hole, insert an expander plug and screw on the line drum with the long screw. Drill mounting holes for the line bar at the same height as the line drum, and insert expander plugs and screw hooks.FIG. 1
- Release the line drum by pulling out the drum lock from the side. Turn the line drum clockwise to unwind the lines and anticlockwise to rewind them. Lock by pressing the drum lock back in. FIG. 2
- Pull the line bar out and hook it onto the screw hooks in the wall opposite the line drum. FIG. 3
- Turn the line drum anticlockwise to stretch the line, and then press in the drum lock. After use, release the drum lock, lift off the line bar from the hooks, and rewind the lines back into the line drum. Keep your hands and fingers out of the waythe automatic rewinding is very quick.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>