Menuett 010146 Electrical Spice Mills Instruction Manual
- June 6, 2024
- Menuett
Table of Contents
Menuett 010146 Electrical Spice Mills
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions).
Care for the environment!
Recycle discarded products in accordance with local regulations. Jula reserves
the right to make changes. For latest version of operating instructions, see
www.jula.com
SAFETY INSTRUCTIONS
Never immerse the product in water or any other liquid.
SYMBOLS
TECHNICAL DATA
- Dimensions: H22 x (i)6 cm
- Battery: 1.5 V, 4 x AAA (LR03)
DESCRIPTION
- Stainless steel cover
- Motor unit
- LED
- Salt/pepper holder
- Light guide
- Adjusting screw for grinding level
- Lid
- Pressure switch for mill motor and light
- Socket
FIG. 1
INSERTING THE BATTERIES
- Remove the lid by turning it anti-clockwise.
- Separate the top part and the salt/pepper holder from each other by turning the top part anti-clockwise.
- Press the motor unit down and remove it from the stainless steel cover.
- Insert 4 x 1.5 V batteries, size AAA (LR03), with the correct polarity as shown by the markings in the battery compartment.
- Carefully return the motor unit into the stainless steel cover and align the guides at the top end of the motor unit in the grooves on the inside of the stainless steel cover.
- Assemble the top part and the salt/pepper holder by aligning them with each other and turning clockwise. Take care to ensure that the salt/pepper holder’s light guide is directly opposite the LED after assembly.
- Replace the lid and turn clockwise to twist into place.
NOTE: The spice mill works best with alkaline batteries.
HOW TO USE
- The salt/pepper holder must be separated from the top part in order to be filled.
- Fill the holder with coarse salt or pepper. The holder must be filled to approx. 80%, not to the brim.
- Assemble the holder with the top part. Take care to ensure that the salt/pepper holder’s light guide is directly opposite the LED after assembly.
- To use the spice mill, lift it off the base and press the power switch button. The light comes on and the mill grinds for as long as the power switch button is held down.
- Set the desired grinding level with the screw on the underside of the bottom part.
NOTE:
- If the mill jams when grinding, shake the spice mill carefully to loosen any salt or peppercorns that have become stuck.
- Suitable for coarse salt and all types of pepper.
MAINTENANCE
The spice mill can be wiped with a damp cloth if necessary.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>